Login Register Sign up for the GRM e-newsletter

Login to post Forums » $2012 Classifieds » Parting out '95 Passat VR6 5-speed
  • slefain

    Jan. 4, 2010 12:57 p.m. slefain Dork

    I'm done with this car, in more ways that one.

    The coil frick'n exploded, but apparently THAT was just a symptom of another problem. So I'm done here, time to move along.

    The engine ran great except for the whole ignition system being crappy thing. No chain noise. 196,000k on it. Transmission was fine, as was the clutch.

    The wheels are 2001 VW GTI 17" wheels with pretty new Nexen tires (225/45-17). I'm wanting $500 for the tire & wheel set.

    The interior is tan and in good condition. It was my DD. It is pretty much intact. I'd really prefer not to ship anything. Tell me what you need. I'd prefer to sell the door handles last, so I can still get inside if needed.

    I'll sell the whole car if someone wants it, but the wheels are a separate deal.

    Oh yeah, I'm open for trades. I dig old dirt bikes, air compressors larger than 10 gallons, engine hoists, and long walks in the park.

  • DukeOfUndersteer

    Jan. 4, 2010 1:44 p.m. DukeOfUndersteer Dork

    in Atlanta? Shut up! where abouts?

  • slefain

    Jan. 4, 2010 1:59 p.m. slefain Dork

    DukeOfUndersteer wrote:

    in Atlanta? Shut up! where abouts?

    I'm in Clarkston, about 45 minutes from you. Pretty much at Stone Mountain Freeway and 285.

    To quote the Varsity: "What'llyahave?!"

  • DukeOfUndersteer

    Jan. 4, 2010 2:52 p.m. DukeOfUndersteer Dork

    the whole thing...

  • Spinout007

    Jan. 5, 2010 1:11 p.m. Spinout007 HalfDork

    yeah I'm thinking I want the whole thing too, just don't know how I could swing it, with the wife not sending me out to sleep in it. How much ya want, I could throw in an old cb200 as a partial trade.

  • slefain

    Jan. 5, 2010 1:13 p.m. slefain Dork

    The Duke is coming to take a look at it probably this weekend, I'll let you know if he doesn't want it.

  • Spinout007

    Jan. 6, 2010 9:56 a.m. Spinout007 HalfDork

    sweet..keep me informed

    On side note...anyone know how hard it is to swap a VR6 into a 92 GTi?

  • DukeOfUndersteer

    Jan. 6, 2010 9:59 a.m. DukeOfUndersteer Dork

    In reply to Spinout007:

    Its a fairly typical swap, should bolt right up.

  • ansonivan

    Jan. 6, 2010 12:09 p.m. ansonivan Reader

    Start a parting thread Here, you should be able to get $1500 or more out of the parts if you're patient and have the space.

  • DILYSI Dave

    Jan. 6, 2010 12:18 p.m. DILYSI Dave SuperDork

    Hmm - this car, + an A1 to hang all the fun parts on, seems like it could be a fun, cheap toy.

  • slefain

    Jan. 6, 2010 12:25 p.m. slefain Dork

    Man, I didn't think anyone would want it. I had thought about keeping it for my own devious plans but my desire for garage space proves otherwise. All proceeds of this sale will benefit me and my probable purchase of my uncle's '75 Dart (225 slant-6, auto with working A/C).

  • John Brown

    Jan. 6, 2010 12:58 p.m. John Brown SuperDork

    I want it too, but the mileage thing doesn't work for me. A VR6 Beetle would ickkay asskay

  • Paul_VR6

    Jan. 6, 2010 1:20 p.m. Paul_VR6 Reader

    I've comp tested some of those motors with 200+k and they get 180+ on all cyls dead even. Pulled apart more only to see perfect bores and cross hatching. Some valve seals and a headgasket away from running another 200k.

  • dansxr2

    Jan. 6, 2010 1:58 p.m. dansxr2 Reader

    Where was this when the trans died in the Corrado...??? Is a sad man today.

  • 16vCorey

    Jan. 6, 2010 3:26 p.m. 16vCorey SuperDork

    I'm thinking of selling my VR6 5 speed Passat, if anyone wants to build something cool with it. Needs a heater core, but I could bypass it and you can drive it anywhere. Hopefully south, as you'll have no heat.

  • slefain

    Jan. 6, 2010 3:44 p.m. slefain Dork

    16vCorey wrote:

    I'm thinking of selling my VR6 5 speed Passat, if anyone wants to build something cool with it. Needs a heater core, but I could bypass it and you can drive it anywhere. Hopefully south, as you'll have no heat.

    I had the heater core in my replaced last year, one of the few repairs I haven't done myself. The shop offered to do it for $400 so I jumped at the chance. Afterward the guy said he'd never do one again.

  • 16vCorey

    Jan. 6, 2010 3:48 p.m. 16vCorey SuperDork

    slefain wrote:

    16vCorey wrote:

    I'm thinking of selling my VR6 5 speed Passat, if anyone wants to build something cool with it. Needs a heater core, but I could bypass it and you can drive it anywhere. Hopefully south, as you'll have no heat.

    I had the heater core in my replaced last year, one of the few repairs I haven't done myself. The shop offered to do it for $400 so I jumped at the chance. Afterward the guy said he'd never do one again.

    Yep, I had a '91 Passat before this one, and did the heater core myself, hence the reason I've procrastinated so long on putting a new one in this car.

  • Spinout007

    Jan. 6, 2010 8:02 p.m. Spinout007 HalfDork

    yeah, I'm thinking this might be the way to go to get a bit more umph in my GTi, vs homebrew turbo.....heater core not necessary.

  • Travis_K

    Jan. 9, 2010 1:16 p.m. Travis_K Dork

    The whole front suspension, and the springs if you cut them also work pretty well on a gti.

  • slefain

    Jan. 9, 2010 1:40 p.m. slefain Dork

    Tentatively sold to the Duke, he's going to pick it up next Saturday.

  • DukeOfUndersteer

    Jan. 9, 2010 6:01 p.m. DukeOfUndersteer Dork

    slefain wrote:

    Tentatively sold to the Duke, he's going to pick it up next Saturday.

    Yup, definately! Awesome car in awesome shape!

  • slefain

    Feb. 14, 2010 3:03 p.m. slefain Dork

    Well the Duke drove off in the Passat just a little while ago. Sad to see it go, but now I can check "VW" off my manufacturer "to do" list.

  • DukeOfUndersteer

    Feb. 15, 2010 8:18 a.m. DukeOfUndersteer SuperDork

    Made it to Buford in great shape! There was a wreck on Jimmy Carter and traffic was backed up and i was say "dont break down on me!!!" it didnt.

 
Tire Rack- Revolutionizing Tire Buying

You'll need to log in to post.