i have a 60k mile 6.0 shortblock w/ oil pan, balancer, flexplate, cam, lifters pulled from a 2005 H2.
i also have a pair of used but clean L92 heads complete with rockers.
i'll include a low mile water pump from a pickup w/ pulley so you just need a truck alternator/PS bracket and tensioner to finish your accessory system. i will also include 7 low mile(23k) ignition coils from an 01 silverado - shipping company broke one - along with their brackets and coil harness and a used good set of plug wires. also will include a pair of 6.0 silverado exhaust manifolds with no broken studs.
to complete for carb application you will need: head bolts, water pump bolts, cam position sensor(think the msd box uses cam/crank sensors), intake manifold,, one coil, misc bolts, and valve covers.
this is for pickup only, located in medina ohio just south of cleveland and west of akron off I-71, for $900 CASH
also:
98 F body LS1 heads, clean w/ valve covers miles unknown $125
98 F body LS1 intake great shape $75
01 23k mile 5.3 intake/injectors/rails $75
truck oil pan/pickup $75
F body manifolds(need new studs) with like new(used 1 week) MAC offroad Y pipe $200
You sure you won't ship any of this stuff?
i dont feel like shipping the 6.0/L92 head package but it can be done, i have built crates and shipped engines before. buyer pays for crating materials and sets up freight - i live just out of cleveland so i can drop off at any teminal on the west side. let me know what you're eyeing and we'll figure something out.
Does either the f-body or truck intake come with a cable operated throttle body, by any chance? would simplify my istalation if I could purge my drive-by-wire.
nope i only had one TB and it is on my 5.3 going into my 46 chevy.
wanna put the lsx in my 318ti?
Looks like freighting it would cost too much. 
How much to ship the LS1 heads and intake?
probably 45 bux in 2 boxes, last pair of heads didnt go as far and they were $32.
package deal $220 shipped for the heads/intake
Gimp wrote:
wanna put the lsx in my 318ti?
yes, as soon as the 2 trucks are done.
find me a pair of matching good usable t3's that'll work on a 8:1 350 and a 600 holley DP that i can build for a blow through system.
Oh man that is a sweet deal! E-mail me some pics to: amx310 "at" g-mail "dot" com. I gotta check the fundage but I should be able to clear it this week no problem. 
here you go
http://www.nastyz28.com/~patgizz/temp/ls1intake.jpg
http://www.nastyz28.com/~patgizz/temp/ls1heads.jpg
$750 bottom dollar make it disappear by this sunday price on the 6.0/L92 heads
the LS1 heads appear now to be 99-00 units with 853 casting number.
L92 heads/6.0 shortblock SOLD
