patgizz
patgizz GRM+ Memberand Dork
2/5/09 11:09 a.m.

lotsa stuff:

93 thunderbird complete IRS setup wheel to wheel w/ 3 factory 15" aluminum wheels. 7.5" diff, drum brakes. includes cradle - no springs they were bad. $200

92 4.3 chevy Z code from 1500 intake to pan w/ exhaust manis, flexplate, and balancer ran with 171k when pulled for v8 swap $50

16x8 5x115 crosslace wheels from turbo grand prix - finish is bad but they work $50

92 S10 4.3/5 speed ECM, gauge cluster w/ tach $20/both

1976 SM465 trans from 2wd C30, works great $150

lumina APV/silhouette/transport radiator $35

lumina Z34 radiator $50

97 caravan rotors, pads with 15 miles, misc parts $20 for all

96 firebird 16x8 wheels(base model not trans am or formula salad shooters) $125

90-94 lumina euro bumper covers $15/both

64 impala SS 14" hubcaps driver quality $50

39-40 chevy pickup steel front fenders rough(pass side has front corner cut out to fit over a frame) but workable $50/both

TBI small block chevy intake manifolds $20 each/3 avail

LT1 intake manifolds both from impala SS $40 each/2 avail

454 TBI truck alternator - new in box $75

BBC eddy torker intake - blasted/ready $100

LSx truck intake off 23k mile 01 5.3 w/ injectors and rails $75

77-96 caprice/roadmonster/all B and D body, astro van, etc... precision ride front shocks new $25/pair 2 avail

gabriel sport ryder front shocks for above $25/pair

2" ram horn exhaust manis for SBC - NOS GM parts, never installed $75

F bod LS1 MAF 1998 $50

Northstar caddy throttle body/bracket NEW $50

Pioneer GM-X364 amp working condition w/ orig box $35

91 corvette magnesium valve covers clearance for roller rockers $75

350 TBI engine - bought from junkyard supposedly pulled from running truck for me. $300

th350 long tail trans in working condition $100

Nashco
Nashco SuperDork
2/5/09 12:11 p.m.
patgizz wrote: Northstar caddy throttle body/bracket NEW $50

What year (or part number, if you don't know)?

Bryce

patgizz
patgizz GRM+ Memberand Dork
2/5/09 12:31 p.m.

12560099 on the TB 25671586 on the bracket - also has IAC and TPS brand new and installed

i was going to build a megasquirt system on a 235 a couple years ago and bought this, fuel rail, then sold the engine.

TB is $187 and bracket is a whopping $3.30 on gmpartsdirect.com

Nashco
Nashco SuperDork
2/5/09 12:36 p.m.

12560099 is for 2000+ engines. I need an earlier one for my project, thanks though.

Bryce

stan_d
stan_d Dork
2/6/09 7:46 a.m.

I need lt1 intake does it have the crossover for the fuel rail in front?

Stan

patgizz
patgizz GRM+ Memberand Dork
2/6/09 8:44 a.m.

yes both do - they are off impala ss engines. either will need cleaned but both are undamaged and i can send you the cleanest one since you're first.

i believe only the 92-93 vette and 93 f body did not have front fuel rail crossovers

patgizz
patgizz GRM+ Memberand Dork
2/6/09 9:48 a.m.

add to the list:

"XS Power" stainless small block chevy twin turbo headers with T3 flanges - new in box $240 shipped(usa address canada slightly more)

You'll need to log in to post.

Our Preferred Partners
5ktrGW9SZqByq9jH8KR6MqX8mMaUXVt5fzUT0pTawHp5tF17gIUmQPFBT6x4Ujwe