1 2
scottkingrn
scottkingrn
8/9/12 7:15 p.m.

I bought this car complete a couple months ago from a guy in Knoxville. The Converse V8 kit cost over $900, I have a 3" binder full of documentation on this car. I am going back to school this fall, and really don't have the time to part it out. I pulled the engine and trans out of the car along with the gauges, and the IPD sways. The car is also sitting on a nice set of turbo hydras with matching tires.

The car still has the fuel cell, lines, walbro 255 pump, the aluminum radiator, efan, converse kit setup for Ford 302 T5 trans, anlong with the clutch pedal, cable, the mustang harness, pcm, jamex springs, momo steering wheel, snow scoop, ecodes, along with the SCT tuner with selector.

All the car needs to run is a cheap 5.0 T5 setup.

I priced out the parts on the car, and there is over $2500 worth of quick sell parts. I want $700 out of the roller. The car is located in Cleveland, Tennessee. You can reach me at 423-716-5320 Thanks Scott

Here is the ad Eric made for the car along with the previous owner Max showing details about the car.

http://forums.turbobricks.com/showthread.php?t=256719

http://www.r3vlimited.com/board/showthread.php?t=203522

Uploaded from the Photobucket iPhone App

Mustang Volvo 240 740 940 V70 V70R 302 Ford Converse LS1 T56 AOD T5 Tremec Cobra Ecode Headlights Aluminum Radiator SCT Chip Tuner Harness Computer ECIV BBK Headers Exhaust Jamex springs

Nashco
Nashco UltraDork
8/9/12 7:48 p.m.

Mmm, wish that was closer. For those days when you want a 5.0 burnout that is more meatball than mullet!

Bryce

corytate
corytate Dork
8/9/12 8:20 p.m.

damnit if only you wanted to trade for a mostly complete 280z=/
I've been lusting after one of these for a while now

chandlerGTi
chandlerGTi HalfDork
8/9/12 9:24 p.m.

To bad that's not Cleveland Ohio!

patgizz
patgizz UltraDork
8/10/12 7:19 a.m.
chandlerGTi wrote: To bad that's not Cleveland Ohio!

x2 i'd be on the way with trailer.

N Sperlo
N Sperlo PowerDork
8/10/12 7:22 a.m.

If it were a wagon, I'd be on my way now.

scottkingrn
scottkingrn New Reader
8/10/12 7:51 a.m.

Here's a little wagon porn for you then.

Photobucket

HoserRacing
HoserRacing Reader
7/17/13 11:06 a.m.

Ok, I bought this car, messed up the DS door loading it, pulled it off, bought a V8 RX7 instead, and now I need shop space back. $450 without the radiator, or trade for 2nd gen RX-7 suspension goodies or Miata goodies. Let me know what you've got. Too much going on to part it out :( If you can't pick it up right away and are interested, I can hold it for you after payment, I can put a tarp over it out in the yard, or use some stretch film to cover up DS door opening :D

Dented
Dented New Reader
7/18/13 7:11 a.m.

Now it shows up. I have been looking for something like that as I have a 940 I would like to modify. Unfortunately, my finances dried up for a while. And you are 1000 miles from me. In reply to HoserRacing:

Cotton
Cotton SuperDork
7/23/13 3:54 p.m.
HoserRacing wrote: Ok, I bought this car, messed up the DS door loading it, pulled it off, bought a V8 RX7 instead, and now I need shop space back. $450 without the radiator, or trade for 2nd gen RX-7 suspension goodies or Miata goodies. Let me know what you've got. Too much going on to part it out :( If you can't pick it up right away and are interested, I can hold it for you after payment, I can put a tarp over it out in the yard, or use some stretch film to cover up DS door opening :D

Pretty cool. Do you have current pictures of the condition?

HoserRacing
HoserRacing Reader
7/23/13 9:03 p.m.

Yes, what's your e-mail & I'll send you about 15 pics :)

HoserRacing
HoserRacing Reader
8/9/13 9:04 a.m.

In reply to Dented:

Still have it, when I replied to your e-mail it bounced back. Let me know what your correct e-mail is & I'll get you some pics. Thanks!

Cotton
Cotton SuperDork
8/9/13 9:51 a.m.

pics to cottonyzf at gmail please

914Driver
914Driver MegaDork
8/9/13 11:13 a.m.

Roller, no engine, tranny or radiator with a buggered up door, $450. Is that right?

Is it the stock Volvo rear end in there?

Dan

Donebrokeit
Donebrokeit HalfDork
8/9/13 9:20 p.m.

$137.88 ? Maybe?

HoserRacing
HoserRacing Reader
8/9/13 9:21 p.m.

Cotton - Pics sent

Dan - yes, and yes, also includes the Converse engineering kit set-up, E code head lights, snow scoop, hydra wheels, perfect dash, Momo steering wheel & adapter, BBK headers, sure I'm forgetting something.

corytate
corytate SuperDork
8/9/13 9:48 p.m.

aww man how is this not gone yet?

HoserRacing
HoserRacing Reader
8/10/13 7:09 a.m.

In reply to corytate:

I don't know. Looks like I'm going to have to part it out this fall :( Need to free up some shop space

Dented
Dented New Reader
8/10/13 7:21 a.m.

Yea, I forgot to change to email.Sorry. if you can send some pic to dskrede@gmail.com that would be great. And where is it located?Thanks

In reply to HoserRacing:
Sine_Qua_Non
Sine_Qua_Non Reader
8/10/13 7:57 a.m.

How much for the wheels if you part it out?

dabird
dabird Reader
8/10/13 1:38 p.m.

if you part it give me a price on the Converse kit. I've got a 90 740T wagon sitting in my driveway with a wicked piston slap

HoserRacing
HoserRacing Reader
8/10/13 4:19 p.m.

Pics sent. Haven't looked at the market on the parts yet, make me an offer on the wheels, the Converse kit was $900, how does $450 sound? Car is located in Chatsworth, GA, about 90 miles north of Atlanta.

HoserRacing
HoserRacing Reader
9/10/13 8:57 a.m.

Sold! Thanks Dennis!

JoeyM
JoeyM Mod Squad
9/10/13 9:02 a.m.

Turbo Brick FTW!!!

CLynn85
CLynn85 HalfDork
9/10/13 5:25 p.m.

How did I miss this?????? 302/t5 in the shed waiting for a new home. Hope the new owner posts updates as they put it together.

1 2
Our Preferred Partners
Dr1L4RPL5I3MjBBsoj1KkuclDQ3CBRmd