1 2 3 4
pimpm3
pimpm3 SuperDork
1/12/19 4:42 p.m.

So today I bought a 1997 Z28.  It has terrible paint and it overheats.  I plan to fix both of these issues by the time October rolls around. 

The previous owner had it for the past 10 years and slowly modified it over his time with the car.  It has lots of cool parts which is why I pulled the trigger despite its many deficiencies.  It came with some random extra parts that I will document further as I work through the build thread.

So with out further ado... a couple of pictures from the pickup today.

Tires are shot. Every panel has terrible paint and it overheats.  I hope to tear into it a little next week to see what I have to work with.  

 

Dusterbd13-michael
Dusterbd13-michael MegaDork
1/12/19 5:27 p.m.

ill give you 20 bucks if you actually grow a joe dirt mullet for the challenge.

twenty

bucks

OHSCrifle
OHSCrifle GRM+ Memberand SuperDork
1/12/19 5:54 p.m.

Anybody else see NSX in this shot?

Patrick
Patrick GRM+ Memberand MegaDork
1/12/19 6:48 p.m.

Wheels suck, i’ll trade you for some c5 wagon wheels

pimpm3
pimpm3 SuperDork
1/12/19 6:52 p.m.

Wheels are 18x9.5 at each corner.  I am perfectly happy with them smiley.  It has 315s on the rear and 295s up front. All tires are super bald.

It also came a set of beat up 17x9 ss 10 spoke wheels without tires.

pimpm3
pimpm3 SuperDork
1/12/19 6:59 p.m.
OHSCrifle said:

Anybody else see NSX in this shot?

I do see it in your cropped picture.  Trust me this car is as far from an NSX as you can get.

Patrick
Patrick GRM+ Memberand MegaDork
1/12/19 7:15 p.m.
pimpm3 said:

Wheels are 18x9.5 at each corner.  I am perfectly happy with them smiley.  It has 315s on the rear and 295s up front. All tires are super bald.

It also came a set of beat up 17x9 ss 10 spoke wheels without tires.

If you’re forcing my hand i’ll take the ss wheels too

Spoolpigeon
Spoolpigeon PowerDork
1/12/19 8:47 p.m.

Since it’s a CAM build, make sure to get in the CAM Nation Facebook page and complain about rules. 

Andy Neuman
Andy Neuman Dork
1/12/19 9:12 p.m.
Dusterbd13-michael said:

ill give you 20 bucks if you actually grow a joe dirt mullet for the challenge.

twenty

bucks

Not to worry, I’ll bring my mullet wig. 

pimpm3
pimpm3 SuperDork
1/13/19 1:49 p.m.

Here are the 10 spoke wheels that came with the car.  I am going to get them cleaned up  and fix the paint on them.

GTXVette
GTXVette SuperDork
1/13/19 2:16 p.m.

I traded a Set Like That, I Have an 18/19 set That are Real Nice The 19's Have Brand New Hoosier's, And two Different Sets From Early C4's 1 set 16 1 set 17, I traded my set like yours And got the 18/19 set, That Don't fit well 'Cause 2nd gen C4's are Wider, That Said I want A Set of Gran sport's  Like Pat Is Saving for His Chevelle .

          Any interest?

759NRNG
759NRNG SuperDork
1/13/19 2:55 p.m.

 

Manual trans?

pontiacstogo
pontiacstogo New Reader
1/13/19 4:04 p.m.

Cool pick up - I have a soft spot for 4th gens so I'll be following with interest. 

pimpm3
pimpm3 SuperDork
1/13/19 5:10 p.m.

In reply to 759NRNG :

It is a 6 speed yes

759NRNG
759NRNG SuperDork
1/13/19 6:18 p.m.
pimpm3 said:

In reply to 759NRNG :

It is a 6 speed yes

winner winner chicken dinner!!!!

Patrick
Patrick GRM+ Memberand MegaDork
1/13/19 7:21 p.m.
pimpm3 said:

In reply to 759NRNG :

It is a 6 speed yes

So you bought a t56 and got a free camaro

pimpm3
pimpm3 SuperDork
1/13/19 8:05 p.m.

The lt1 t56's are not as valuable as the ls ones. I bought one last year for $800 for the c10.

I bought a collection of parts, some attached to a e36m3y camaro some not attached.

AnthonyGS
AnthonyGS GRM+ Memberand HalfDork
1/14/19 8:27 p.m.

Woohoo Ford vs Chevy CAM shootout at the challenge!  I envy your rear suspension setup already.....

AnthonyGS
AnthonyGS GRM+ Memberand HalfDork
1/14/19 8:29 p.m.
Spoolpigeon said:

Since it’s a CAM build, make sure to get in the CAM Nation Facebook page and complain about rules. 

Another reason I’m not on facebook and I didn’t even know it.

pimpm3
pimpm3 SuperDork
1/21/19 11:35 a.m.

I too am not on Facebook.  I just got hack from my buddies bachelor party.  Hopefully I can get started on the car this week.

GCrites80s
GCrites80s Reader
1/21/19 6:41 p.m.
pimpm3 said:

The lt1 t56's are not as valuable as the ls ones. I bought one last year for $800 for the c10.

I bought a collection of parts, some attached to a e36m3y camaro some not attached.

You still got a deal on that $800 T56. There's still a lot of people wanting to put T56s behind SBCs without bothering with getting ahold of different bellhousings and input shafts. The price difference, I say, is that LT1 clutches are a lot more expensive than LS ones.

pimpm3
pimpm3 SuperDork
1/22/19 7:23 p.m.

So the previous owner sent me a bunch of receipts from the 11 plus years he had the car.  I need to go through them and sort out everything that he did.

He also sent me a dyno of the car with the heads, and cam but prior to the long tubes.  No telling what it makes with the blown head gasket.

I am excited about the torque... devil

AnthonyGS
AnthonyGS GRM+ Memberand HalfDork
1/22/19 11:19 p.m.

In reply to pimpm3 :

Looks like you scored a 12 second car for challenge change.  Impressive.

 

midniteson
midniteson Reader
1/23/19 1:16 a.m.

Great Score! anything done to the suspension? or any plans to modify it? I have a 4th gen as well. I will be following along. 

sleepyhead
sleepyhead GRM+ Memberand Mod Squad
1/23/19 4:13 a.m.

following along for updates

1 2 3 4

You'll need to log in to post.

Our Preferred Partners
zCdj4qE8c2EU7zteizO9gVPtybAiZ9NgeL9u9ARQggZC4WEAhcTx8pt5kTyiCiq5