1 2
dansxr2
dansxr2 Dork
3/14/16 9:20 a.m.

 photo received_10153288490301333_zpselu8tzlj.jpeg photo received_10153288490266333_zpsoo1ydlwu.jpeg

Well I found my issue causing it to smoke under boost... Lol

Now to fix it so it never happens again.  photo IMG_20160311_203511_zpsasdddud6.jpg

dansxr2
dansxr2 Dork
3/20/16 5:21 a.m.

 photo IMG_20160317_191724109_zpssqqj92g2.jpg Pulling the block this week to have the rotating assembly balanced.

dansxr2
dansxr2 Dork
4/9/16 9:29 p.m.

 photo IMG_20160407_145444_zps0kuwkn00.jpg Dropped off Friday for balancing and having the block prepped for new internals! Looking forward to the refresh of the car, and new found responsiveness! How's the Gen 4 swap treating you guys?

dansxr2
dansxr2 Dork
4/28/16 10:56 p.m.

 photo received_10153404586931333_zps1oycd1dk.jpeg photo received_10153404586886333_zpshbe4l5ta.jpeg photo received_10153414130201333_zps0kdfiwqe.jpeg

Progressing well so far! Waiting for a proper size rear seal, which will hopefully arrive so I can begin reassembly

dansxr2
dansxr2 Dork
5/6/16 10:43 p.m.

 photo IMG_20160506_213834_zpshync61ck.jpg  photo IMG_20160506_205407218_zps963qonyo.jpg The block is back in the car!!! Maybe another week if evenings And I can fire it up!

crankwalk
crankwalk Dork
5/7/16 11:50 p.m.

Nice! Solid bottom end right there.

dansxr2
dansxr2 Dork
5/8/16 10:06 p.m.

Thanks! It should hold anything I ever plan on dishing out in the future. A good tune on a MSPnP, Camshafts, and Turbo upgrade should really up the HP!

dansxr2
dansxr2 Dork
5/26/16 8:04 a.m.

 photo IMG_20160521_185958364_zpsfhmgea4t.jpg It runs! And quite smoothly I might add! One small issue came up 10 Miles in, the bypass hose o-ring began leaking. Go figure the one part I misplaced and installed a regular o-ring in its place lol. New part ordered and should be here today.

This is with an open Downpipe. I'll take video of her this evening or tomorrow.

jfryjfry
jfryjfry New Reader
5/27/16 9:10 a.m.

Fantastic!

Harvey
Harvey Dork
5/27/16 11:15 a.m.

Nice!

dansxr2
dansxr2 Dork
8/30/18 12:04 a.m.

It's been to long since I've updated this project.  Life has gotten in the way, but this build is on part two.  Last time I built a forged and balanced bottom end.  I recently sold my white '89 Probe GT and using the cash to finance the 2nd part of the build.   It is consisting of a GT3071R Turbo Kit, MSPnP2, 255 Walbro Fuel Pump, Top Feed Fuel Rail Conversion, Southbend Stage 3 Clutch, 1000cc Injectors, and some other goodies.  

Pics to come, can't seem to get them to link.

dansxr2
dansxr2 Dork
11/2/18 12:19 p.m.

Shes slowly coming together.  Flywheel is being resurfaced, and the engine/transmission will be able to be reassembled.  I found a small area of rust I'm about to repair, so once that's buttoned up, the engine can go back in the car.  I also picked up a clear camcover to add a little asthetics.  The cars rebuild consists of a stock block, Wiseco Forged 86.00mm Pistons, Eagle Rods, Balanced Crank, Lightweight Flywheel, Southbend Stage 3 Clutch, Cometic .056" MLS Headgasket, ARP Headstuds, MegaSquirt PnP2, Walbro 255 Fuel Pump, GSC S1 268 duration cams, GT3071R Turbo, 1000cc Fuel Injection Development Injectors, Racer X Top Feed Fuel Rail, 3" Stainless Exhaust, and a Tial EWG. Super excited to get to fire it up, but still have a away to go yet.  On a positive note, I'm going to be a Dad!!!!  We find out what it is on Nov 12th, what my little shop helper will be!  

dansxr2
dansxr2 Dork
11/19/18 10:41 p.m.

Looking good so far!  

Gates Racing Timing Belt installed, as well as new timing components.

I'm so excited to announce my wife and I just found out the gender of our upcoming baby.  IT'S A BOY!!! Coming April 2019!!! #FutureGRMSubscriber

dculberson
dculberson UltimaDork
11/20/18 8:50 a.m.

Awesome! I was just reading the thread to refresh on the car from the start and I was surprised by the baby news. Get ready to have garage time reduced and yet for some reason totally not regret it. I'm still able to get an hour or two in every couple days but the kiddos (2 now) are just so amazing and fun that while I miss the 8 hour epic wrenching sessions, what's replaced them for now is even better.

Cool car, and I've been enjoying the heck out of my 2001 MR2. It's been the perfect motorcycle replacement for a safety conscious dad.

dansxr2
dansxr2 Dork
11/20/18 2:24 p.m.

Got the new Southbend clutch installed today.  I agree, the reduced wrenchtime will be worth it!  I couldn't be more stoked!

pimpm3
pimpm3 SuperDork
11/20/18 7:34 p.m.

Congratulations!

dansxr2
dansxr2 Dork
11/23/18 10:25 p.m.

In reply to pimpm3 :

Thank you!  A new team member!

dansxr2
dansxr2 Dork
12/21/18 7:38 p.m.

Here is the area I mention previously.  I have a friend with a half cut, and he's going to cut out a section out of it and bring it to me.  I figure I'd just l'd just go ahead and address it while the engine is out for easy access. I removed the driver side bracket to access it easier.  After welding in the sectioned panel, I'll undercoat it to prevent it from happening again in the future.  

mr2s2000elise
mr2s2000elise Reader
12/22/18 9:44 a.m.

Gorgeous car 

welcome to dad club 

 

we have 9 cars, from cheap to very expensive. When given a choice, my boys always first pic sw20 MR2 to take out. Can’t blame them, it’s the best mr2 made and looks the best.  Only wish it had back seats. No I don’t want an ugly Evora

 

looking forward to more updates 

dansxr2
dansxr2 Dork
2/13/19 2:25 p.m.

While waiting for my section to repair the rusted area on my car, I wire wheeled the manifold and sprayed it with ceramic  high heat paint. 

I also began giving the engine bay a through cleaning.   Years of gunk, now gone!

My stepdad who is 80 wanted to get in on the project too lol.  He is a retired mechanic/fabricator/crane & machine operator.  The subframe had an area rusted through on the side of the bolt hole.  He welded it up for me while I was at work.  

1 2
Our Preferred Partners
FASFflpsDkEX4mH3Il5RFpeVjeCPsN3qbsj6jjjuepiBrLeNQ8hgUChAyi5BQIwl