GRM on the road assist list

NGTD wrote: North Bay, ON, Canada P1C 1M9 - put that on your map!!! Not likely that many of you will be up this way, but who knows. North Bay sits at the junction of the two "Trans-Canada Highways" that cross Ontario, Hwys. 11 and 17. They only meet twice North Bay and Thunder Bay. So if you are crossing Ontario chances are you pass through my way (unless you are just cutting across Southern Ontario). Decent tools, compressor, etc. 2 car garage. I have a vehicle with 5K lb towing capacity. No trailer but a friend has one. va3cot at gmail dot com

Coordinates:

46.338732, -79.427710

Co ordinates

40.985066, -84.582182

I was hoping someone with skills would take this and run with it

34.762615, -84.740690 Chatsworth, GA, between Chattanooga, TN and Atlanta, GA. Lift will be installed Tuesday, have a welder (but can't weld for crap ), compressor, decent selection of tools, trailer & tow pig good for 10K, and a great mechanic 2 miles away if it's not a DIY problem. 7zerosix twosevenO thirtytwo eight7 Plenty of spare Miata parts

Erlanger, KY, just south of Cincy, OH, pretty close to I75/I71, just south of the I-275 loop. Got a van, trailer, winch, and your basic hand and air tools in a residential 2-car garage. Sometimes have a welder on the premises, but it's not mine so I sometimes have to loan it back. There's usually beer in the house, always got bourbon and Scotch.

38.981826, -84.556203

PMs go to email, email is checked every 15 minutes. Text or call (nine hundred fifty nine minus 100) - [eight times one hundred] plus 2 - O, 489.

My Coordinates:

41.003015, -87.912355

I also updated my contact info on the first page.

I don't have a GPS, how do I find my coordinates? I am in Hyde Park NY, have hand and air tools, a cheap Harbor Freight 220 welder, and a barbecue.

In reply to Wally:

Go on Google maps, find your place and it will give you the coordinates.

In reply to Autolex:

canton mi 48187 close to I-275 / I-96 / MI-14

home garage, no special tools

no fear of wiring

smart as berkeley

42.350774,-83.473477

45.737482, -122.486570

Wally wrote: I don't have a GPS, how do I find my coordinates? I am in Hyde Park NY, have hand and air tools, a cheap Harbor Freight 220 welder, and a barbecue.

No worries; it's pretty simple

• Go to google maps (http://maps.google.com)
• Drop a pin on your house (right click on top of your house, or nearby if you'd rather not be exact)
• Click "what's here" and post the coordinates that pop up in the little box in the upper left corner in this thread

We're getting enough that i'll take a crack at the initial map this weekend.

I am at 35.8418945,-78.6083051 in Raleigh, NC. You can see the boy child packing the car to go fishing in that picture. He saw the Google car and subsequently LOST HIS DANG MIND with excitement.

I can help with hand tools, rides, local knowledge, etc. If you contact Mojo first and have a rotary engine, don't be afraid to call me, either.

nine one nine 4 one dos niner niner five ate

If you find yourself in Juneau, Alaska and need assistance, I can help you out. I've got a 'normal' amount of tools and enough local knowledge to be helpful if you get really stuck.

Roughly 58.397446, -134.560729

The best way to contact is my username @ gmail.com

I'm located off exit 29 on I-76 near Akron Ohio. I have pretty much a full service shop, so call if you need help. I have a truck (or 4), but I do not have a trailer. 33zero-2one2-7twoninesix.

Latitude : 47.266672 | Longitude : -122.496449

39.670195, -86.255191

Home garage, cheap HF flux core welder, redneck ingenuity. May not fix it right but it'll work.

Enon, Ohio (backwards spells "none"). More information earlier in this thread...

39.877197, -83.936110

37.666548, -113.077112

41.988675, -72.272736

• Spokane Valley, WA, Just south of I-90 off Evergreen Rd. (20 minutes from Spokane, 30 minutes from Coeur D'Alene, ID)
• Decently stocked home garage w/ welder, compressor, drill press, and myriad hand tools
• '99 F250LD for towing (no trailer, but can get a double-axle flat bed hauler on pretty short notice from friends)
• Some room to sleep and always a hot meal (sorry, no alcohol though)
• PM goes directly to email, or 5oh9 7oh1 sixsixsix4
• 47.648333, -117.218143 (puts you within a few hundred yards of my house)

Everyone take a look at this and let me know what you think; suggestions welcome.

Click this here

If your location is wrong, please comment on this thread with a COORDINATE location (instructions listed above on this page)

Would it be possible for a mod to bring this up to the first page? Additionally; if someone actually @ GRM wants to maintain/own this and they have a google account, I can make them a co-owner or editor very easily.

In reply to Autolex:

Luckily, I have a google account, but it is saying that it requires permission to see the page. You may want to switch that.

Sorted. Apologies, I was at work and in quite a hurry. Public access now. Thanks synthetic!

Better late than never.

APPROX location: 38.774651, -90.317896

three 1 four 4 eight 8 three 7 eight 7

I've got enough resources to get you the berkeley back on the road, but it's a driveway operation. That's the way we do it here.

I've got a truck and tow straps. No trailer. OBDII reader. A jack and stands that will sink into my asphalt driveway. Whatever tools are crucial will be missing at the time. Harbor freight is four miles away. That is the important thing, right?

N Sperlo wrote: Better late than never. APPROX location: 38.774651, -90.317896

Added. Please verify.

It looks great, thanks for your effort in putting this together!!!