Login Register Sign up for the GRM e-newsletter

Login to post Forums » Grassroots Motorsports » Westfield Eleven kits going into limited production
  • Keith

    Aug. 17, 2011 12:41 p.m. Keith SuperDork

    I've just found out that Westfield is going to make a few more Eleven kits after shutting down production last year. Not many, less than a dozen. It's hard to say if they'll ever make more, so if you've been dreaming about building a replica of this little icon now's the time.

    http://www.manikllc.com/XI.html

  • cwh

    Aug. 17, 2011 2:15 p.m. cwh SuperDork

    Sweet little car, but 65bhp?

  • Kendall_Jones

    Aug. 17, 2011 2:34 p.m. Kendall_Jones Reader

    cwh wrote:

    Sweet little car, but 65bhp?

    Thats stock spridget power. No uses that anymore. Pretty easy to double it with a rebuild.

    Not sure if I'd recommend using a donor spridget wiring harness though :)

    KJ

  • Aug. 17, 2011 4:13 p.m. mndsm SuperDork

    Looks like it needs an LS1.

  • Keith

    Aug. 17, 2011 4:19 p.m. Keith SuperDork

    Yeah, good luck with packaging that A bike engine would be much more plausible.

    This car's all about light and slippery, doing as much as possible with very little. Evo magazine built one a while back and completely fell in love with it.

  • cwh

    Aug. 17, 2011 4:20 p.m. cwh SuperDork

    Keith- Would one of your good Miata motors be appropriate for these?

  • Keith

    Aug. 17, 2011 4:43 p.m. Keith SuperDork

    Good question. I've asked Westfield in the past, and they don't think it would fit. The body is shrink-wrapped around the A-series engine, and those things are tiny. The bike engine suggestion was actually one from Westfield when I had this same discussion with them.

    You could certainly make the Miata motor fit. But I expect you'd end up altering the body.

  • JoeTR6

    Aug. 17, 2011 7:20 p.m. JoeTR6 Reader

    I wonder if a Triumph Rocket III motor and tranny would fit. It' s a 2.3 liter 3 cylinder with 140 hp/150 lb.ft, sequential shift and shaft drive. It might be way to wide, tall, and heavy.

    I've always liked the Lotus Eleven more than a Seven for some reason.

  • VonSmallhausen

    Aug. 17, 2011 10:34 p.m. VonSmallhausen New Reader

    Oh man I want one

  • John Brown

    Aug. 17, 2011 10:57 p.m. John Brown SuperDork

    I would think a Honda150hp outboard motor with proper cooling would package nicely in a lot of things

  • John Brown

    Aug. 17, 2011 10:59 p.m. John Brown SuperDork

    Cancel that, it is apparently a 2.4l Accord engine!

    http://www.stroutspoint.com/hondaModel.php?hp=150&display=description

  • xFactor

    Aug. 18, 2011 6:14 a.m. xFactor New Reader

    I think something with a dry sump system would have worked, but it would have been really close. One of the reasons the 1275 works so well is the ohv design. The engine is tiny, yet weighs a ton.

    later, matt

  • wheelsmithy

    Aug. 18, 2011 6:33 a.m. wheelsmithy Reader

    Nobody's suggested the suzuki swift G13B yet.

  • Feedyurhed

    Aug. 18, 2011 6:39 a.m. Feedyurhed HalfDork

    Two words. Turbo rotary. "Nuff said.

  • T.J.

    Aug. 18, 2011 7:30 a.m. T.J. SuperDork

    If you want the looks, but in a slightly larger package that can handle modern powertrains, take a look at the Kokopelli 11. It is a slightly scaled up 11 that is designed to take either an MGB or Miata.

    I drove an MGB powered one a few years ago and had a nice dinner with Tom Rogers. It would've been a little nicer if my drive wasn't at night in February. It was a little chilly. Even the scaled up version of an 11 is tiny. Bring small feet if you want to drive one.

  • tuna55

    Aug. 18, 2011 7:32 a.m. tuna55 SuperDork

    I want one. badly. But not right now.

  • Javelin

    Aug. 18, 2011 8:42 a.m. Javelin SuperDork

    Feedyurhed wrote:

    Two words. Turbo rotary. "Nuff said.

    A-berkleying-men! That would be epic!

  • Ian F

    Aug. 18, 2011 9:53 a.m. Ian F SuperDork

    T.J. wrote:

    If you want the looks, but in a slightly larger package that can handle modern powertrains, take a look at the Kokopelli 11. It is a slightly scaled up 11 that is designed to take either an MGB or Miata.

    I drove an MGB powered one a few years ago and had a nice dinner with Tom Rogers. It would've been a little nicer if my drive wasn't at night in February. It was a little chilly. Even the scaled up version of an 11 is tiny. Bring small feet if you want to drive one.

    Ooo... I want one of those... it look like they're in MD too? Would save me on shipping

    What I really want is a Lotus 23 kit, but those appear to be on the pricey side (all I've found is the Xanthos from UK).

  • T.J.

    Aug. 18, 2011 10:38 a.m. T.J. SuperDork

    In reply to Ian F:

    Yep. I went there one night while I was in DC for work. Emailed Tom and drove over, he took me out to dinner, we hung out and looked at what he had in his garage, then we took an 11 out for a brisk spin on some nice backroads. I don't know the weight, but just from seeing reall 11 and then looking at the Kokopelli, I think the Kokopelli is fairly stout as well as a bit larger than a real 11. The Westfield 11 is more like a real 11 in every way, but real 11's are tiny.

  • T.J.

    Aug. 18, 2011 10:41 a.m. T.J. SuperDork

    In reply to Ian F:

    Also love to build a 23 inspired kit or even better, design and build my own take on one. A MR Locostish sorta thing. The one in my dreams looks a little more like a Forsgrini than a 23 though.

  • RossD

    Aug. 18, 2011 10:42 a.m. RossD SuperDork

    Didn't someone on the locostusa.com forum build one with a Coventry Climax he got out of a fire pump skid off of ebay... I can't find the link.

    http://www.locostusa.com/forums/viewtopic.php?f=36&t=3137

  • Ian F

    Aug. 18, 2011 12:09 p.m. Ian F SuperDork

    T.J. wrote:

    In reply to Ian F:

    Also love to build a 23 inspired kit or even better, design and build my own take on one. A MR Locostish sorta thing. The one in my dreams looks a little more like a Forsgrini than a 23 though.

    I like this one: http://www.sylva.co.uk/j15.html I have many pictures of one I saw at the Galek Motorsports (DigiDash US distributor) display at Carlisle this year. The Galek one has a MC engine in it. I think building one of these would make for an insanely fun (if not seriously competitive) B-Mod car.

    A Lotus 19 rep would be cool too.

    http://www.princetonlotus.com/ViewClassic.aspx?id=203

    Having drooled over the car above in person, I can confirm it is tiny.

  • slantvaliant

    Aug. 19, 2011 11:55 a.m. slantvaliant Dork

    A Hyperpak Slant Six will fit. Sort of ...

  • mad_machine

    Aug. 19, 2011 12:02 p.m. mad_machine SuperDork

    wish I could build something like that... just can't register it in NJ. You have to title them as a modern, up the current year, car with all the emissions that goes along with it.

    Not sure how a pre-built, pre-owned, pre-titled car would work

  • 93EXCivic

    Aug. 19, 2011 12:16 p.m. 93EXCivic SuperDork

    I will take mine with a tuned A-series.

 
Tire Rack- Revolutionizing Tire Buying

You'll need to log in to post.