wgotzmann
wgotzmann New Reader
4/11/15 7:28 p.m.

After 25 years its time to move on - its for sale Car has been a gem to own all these years. Original Owner 25years - Car has been mechanical rebuilt 1.3 liter I4
Original paint - minor touch ups - Rust free!

Complete Mechanical rebuild

Engine rebuilt Compression lowered approx... 8.5 Over bore .025 Because of Garrett T25BB Head - Polish ported with 210/340 cams New Starter Alternator Turbo Link Engine management Boost control – 6-12 PSI only run 6 PSI on new engine MSD High energy Coils etc.

Transmission – Phantom grip LSD Custom gear cradle harden steel Spec stage 3 clutch

Suspension Poly bushing all around Heavier Sway bars 25mm 23mm Poly end links Variable rate Lowering springs 40mm H&R New struts New wheel bearings

New Cross drill slotted rotors New 4 Calipers stock Painted Blue New Stainless flex brake lines Custom rear HD toe bars

Front Upper and lower Strut tower Braces Rear upper strut tower Braces

Custom Short shifter – Leather boot – Aluminum Pedal pads

White face dash display 9000 PRM

New Custom molded Carpet Boost gauge Wide band O2 Oil pressure Fuel Pressure

205-40-16 Tires / rims G-force TA

New Glass Head assemblies HID bulbs Lite weight Odyssey battery

Option for rebuilt spare head with stock cams can be arranged

Appraisal done $10,000.00 make reasonable offer. over $15,000 invest in parts

Asking $7,000.00 can.

https://drive.google.com/folderview?id=0BxUIEmciZDj7NnNoMU1UdWRfMms&usp=sharing

pinchvalve
pinchvalve GRM+ Memberand MegaDork
4/11/15 9:16 p.m.

That is the best $7K someone is ever going to spend.

NordicSaab
NordicSaab Reader
4/12/15 5:18 a.m.

Excellent idea and execution.

Any idea what kind of power this makes and the weight of the car?

T.J.
T.J. PowerDork
4/12/15 6:27 a.m.

Where is the car located? Looks like a lot of fun.

Mazdax605
Mazdax605 SuperDork
4/12/15 8:12 a.m.

I'm guessing Alberta. It's less than $7k for us yanks.

wgotzmann
wgotzmann New Reader
4/12/15 9:31 p.m.

Car is near Edmonton Alberta

In reply to T.J.:

wgotzmann
wgotzmann New Reader
4/12/15 9:34 p.m.

The car weight about 1900Ibs with fuel
power depends, at one time with original engine it was close to 190 whp 14-15 psi. new engine i have been easy on it - no dyno.

still fun and quick

i have a 3.0"binder on build parts - original oem manual etc. lots of pictures someone needs to see it

In reply to NordicSaab:

You'll need to log in to post.

Our Preferred Partners
GDwG3tMbcayVEs4vnGTlurgilM0RRBT6dJR2PwyqnudDTqUjEl1CUPoY9iNJFc8p