bmw88rider
bmw88rider GRM+ Memberand Reader
6/18/13 6:29 a.m.

Time to get some stuff out of of the garage. Need to make some room for a new project. I have pictures of everything as needed. All items in the Austin, TX area.All prices are shipped prices except the healey parts.

Austin Healey 100/6 Hood and Trunk. Both in really good shape for the age. The hood is the early style with the crease down the middle. $225 each

Berk Gen 2 MR2 downpipe. Ceramic coated. Never installed. $230

Mishmoto Intercooler. Never installed 28" x 7.5" x 2.5" $50

Miata 1994 hollow spoke wheels. really clean condition: $200

Lenso VPD Wheels 13X7.5: Used but in good shape. $320

Magnaflow Exhaust for Mazdaspeed Miata. PN 16639: $300

Flyin Miata rear spring hats for NA: $80

Authentic Togue Run front spoiler for an NA miata. $125

ATS Racing 3.5 inch intake for the MR2. brand new. Perfect for use with the new MR2 MSPNP. $120

Omori 45 MM boost gauge. Never installed. $75

2RUS MR2 FCD $25

Berk MR2 intercooler upper pipe: $39

Coming in the next few weeks, 1991 MR2 Turbo. Really clean and original example. No modifications to the car. Timing belt already replaced. 85K miles. HFH and HFH JR already replaced. Put new Koni Shocks shocks on it. Has some hail dents that will be taken care of before I sell with PDR. $7200

Will add some more as I pull out some more boxes. You can e-mail me at Michael dot L dot booth at GMAIL dot com with any questions or inquiries.

Duke
Duke PowerDork
6/18/13 8:11 a.m.

Pics of the Miata front lip please? Thanks.

SilverFleet
SilverFleet SuperDork
6/18/13 8:17 a.m.

I'm interested in that intercooler.I tried sending you an email but it bounced back. Can you PM or post pics of it? Thanks!

bmw88rider
bmw88rider GRM+ Memberand Reader
6/18/13 8:49 p.m.

HI Guys,

Hopefully this works:

https://plus.google.com/u/0/photos/118421732344403310275/albums/5891000906915924641?authkey=CP69vs6XsaHhaw

For the email it should be an L in the middle.

SilverFleet
SilverFleet SuperDork
6/19/13 7:56 a.m.

On that intercooler...

Does it come with any of the silicone couplers or bends in that bin below it in the pics?

Also, do you know the diameter of the inlet/outlet? I'd assume that it's 2.5''. I need to see if that size will work for me. Not sure if it will be big enough. Very interested though!

You'll need to log in to post.

Our Preferred Partners
crlCtGOfe0xTjGsEJd0c7wMYflztvGFiNBaaeQ2I2BytGxVsQAfftkHt5aZb4zYS