Login Register Sign up for the GRM e-newsletter

Login to post Forums » Sprockets » Anyone building an early GSXR?
  • 44Dwarf

    Sept. 11, 2010 7:06 a.m. 44Dwarf HalfDork

    Anyone building an early GSXR?

    engine parts only. no frames or forks etc.

    I've got a few piles of GSXR parts that will be on e-bay soon but is you need something for a 86-88 GSXR 1052 or 89-92 GSXR 1127 or 93-95 GSXR -W

    Also boat loads of 750 stuff too

    let me know Motor parts only.

    44

  • stroker

    Sept. 14, 2010 9:32 p.m. stroker Reader

    44Dwarf wrote:

    Anyone building an early GSXR?

    I've got a few piles of GSXR parts that will be on e-bay soon but is you need something for a 86-88 GSXR 1052 or 89-92 GSXR 1127 or 93-95 GSXR -W

    Also boat loads of 750 stuff too

    let me know Motor parts only.

    44

    Motor parts only??? Damn. What about complete engines?

  • 44Dwarf

    Sept. 15, 2010 6:55 a.m. 44Dwarf HalfDork

    stroker wrote:

    < Motor parts only??? Damn. What about complete engines?

    Well i've got a few complete 750's and one that comes "some assembly required"

    All the others came to me with holes in the cases or other problems that make them to much of a pain to fix i need the space and the $$. Money raised is going in to the race fund. Tring to make it out from Ma to Mi for a natinal race mid oct.

    44

  • oldopelguy

    Sept. 16, 2010 4:48 p.m. oldopelguy Dork

    Those still the oil cooled motors, same basic block as the Kat and Bandit?

  • 44Dwarf

    Sept. 16, 2010 7:25 p.m. 44Dwarf HalfDork

    YUP

    some of the parts are up on e-bay now but there boat loads more... One of the dwarf i bought years back came with 4 blown motors, i put in a CBR1000 instead.

  • Robert Bowen

    Oct. 1, 2010 4:28 p.m. Robert Bowen

    Just finished building mine. What's left?

  • 44Dwarf

    Oct. 2, 2010 5:23 p.m. 44Dwarf Dork

    whats left... 1052 trans 1127 trans 1052 cams 1127 head with two bent valves no seat or guide damage seen. engine side covers. dyna 2000 ign systems 1127 cyl block needs one sleave 1127 Katana cyl block 8 or 9 1127 rods 3 1052 rods 20 or so 1127 stock pistons 7 1052 stock pistons more i'm sure

  • Robert Bowen

    Oct. 2, 2010 11:53 p.m. Robert Bowen

    I need some aftermarket cams for mine - are those covers stock or HD?

  • 44Dwarf

    Oct. 3, 2010 8:18 a.m. 44Dwarf Dork

    all but one are stock. I've got one Tracksport cover starter clutch side.

  • 44Dwarf

    Oct. 3, 2010 8:25 a.m. 44Dwarf Dork

    oh have 3) 750 oil cooled motors. One is a long stroke and complete. The other two are semi apart ones got custom Arais pistons (13.5:1) drag motor. head is off its missing the clutch. (same way i got it 5 years ago) the other is complete was told it is freash rebuild and was suposidly run once. (same way i got it 5 years ago) My track had written in the rules to size down the motors from 1250cc to 750 max but it didn't happen i was the only one who bought motors...i've never even looked at them again no time.

 
Tire Rack- Revolutionizing Tire Buying

You'll need to log in to post.