1 2
DirtyBird222
DirtyBird222 UltraDork
9/19/16 11:29 p.m.

It's alive!

AngryCorvair
AngryCorvair UltimaDork
9/20/16 9:24 a.m.

Sorry I missed this thread for a while. I was coming in to say soft pedal with no air is usually a poor piston seal in the MC.

Swapping calipers from front of rotor to rear of rotor shouldn't matter unless the bleed screws were pointing down. Hard to get a good bleed with bleed screws pointing down.

DirtyBird222
DirtyBird222 UltraDork
9/20/16 11:29 a.m.

honestly that's what it was. Jumped to far down a rabbit hole and made an ass out of myself. The pedal is still spongy but it stops like it should now

DirtyBird222
DirtyBird222 UltraDork
9/20/16 11:02 p.m.

Also thanks everyone for the input. Put a residual valve in and have a solid pedal now.

1 2
Our Preferred Partners
fRxe2kmoiFhdJ4Icw7Gb0sZbiH9ql3WSggftvXDuSrORIYgCxXmSTvK9pn8e0U60