Login Register Sign up for the GRM e-newsletter

Readers’ Rides » Mazda

  • 42 Votes
  • 12 Comments
  • Nine Updates

Keith’s 1995 Mazda Targa Miata rally special

Built from a bare shell for the Targa Newfoundland rally. Back then, it ran a bored and stroked, 11.5:1 compression engine with a complex home-built header. The suspension was built for as much travel as possible and the car was stripped for light weight. The …

1 of 100 more

  • 38 Votes
  • 11 Comments
  • No Updates

HunterJP’s Mazda Miata

Turns purty good. Makes funny noises when ya shift, too. :D Okay, okay. Its a ‘94 Miata with a FMII turbo kit. List of the bigger mods: 15 X 8 ATS DTC’s, Tein Flex’s (12K front spring, 7K rear) custom re-valve, Flyin’ Miata STB, Wilwood …

2 of 100 more

  • 29 Votes
  • Nine Comments
  • No Updates

Kubotawally’s Mazda 1975 Rx3

SCCA S.E. Division E-Production Champion 2007 12A Street Port built by MazdaTrix pushing 219hp

3 of 100 more

  • 26 Votes
  • Seven Comments
  • No Updates

erasmus229’s 1979 Mazda Rx-7

GLS-SE disc brakes LSD w/ 4.88 Gen II tranny 4-port 13B w/ street port Racing Beat intake/header Silverstone and Falken Tyres Lexan windows Fiberglass hood

4 of 100 more

  • 25 Votes
  • 10 Comments
  • One Update

mw’s 1990 Mazda sawzall miata

My Miata project: 1650lbs wet Stock 1.6 Koni’s and H&R’s Under $700 into it so far. Update: I added a torsen and 550/350 springs on adjustable perches over the winter. I also get a set of 3pc panasports that I picked up on the classifieds …

5 of 100 more

  • 24 Votes
  • Five Comments
  • No Updates

danscreations’s Mazda Miata

1990 Mazda Miata: - Rebuilt Stock 1.6L Engine, Greddy Turbo Kit (TD04), Custom Intercooler & Piping, Custom 2.5” Exhaust (Magnaflow), ACT Streetlight Flywheel & Clutch, Tein Basics, DP6061 Tophats, 16x9.5 CCW Classic, 245/35R16 Toyo T1R, Sparco Speed Seats, Many other smaller things I can’t remember! …

6 of 100 more

  • 20 Votes
  • Four Comments
  • No Updates

TulsaTurbo’s Mazda 1984 Rx7 GSL WideBody

Mariah Mode One Wide Body Package, 230+hp Race 4 Port 13B Engine, Mikuni Aggressor Carbs, Performance Clutch, Racing Beat Street Port Exhaust System, Koni High Performance Suspension System, Rare 3 Piece Aluminum 16” Wheels, 245/45x16 Rear & 225/50x16 Front Tires

7 of 100 more

  • 19 Votes
  • Six Comments
  • No Updates

hrdlydangerous’s Mazda 1980 Rx7 LS

I’ve had this car since 1997 when my dad and I drug it out of a livestock feed company warehouse. The previous owner had hidden it from her husband so he couldn’t get it in their divorce. It had been sitting for about a decade …

8 of 100 more

  • 19 Votes
  • Seven Comments
  • No Updates

Toivo’s 1971 Mazda R100 GTSPM

1981 RX7 plus GT1, 1971 R100SPM Class car. These cars are detailed in Toivo’s profile. You can also visit Toivo’s web page at http://toivo.canusaequipment.com/about-toivo-ra…. If you are interested in this car you can email Toivo at toivoracer@shaw.ca

9 of 100 more

  • 17 Votes
  • Six Comments
  • Two Updates

Greg Voth’s 1984 Mazda RX-7 GSL-SE

I have owned this car for about 6 years now. I had the same color and model in High School and just could not get over it. The picture is at the Ocala test track. This car has a good deal of work done to …

10 of 100 more

  • 17 Votes
  • Three Comments
  • No Updates

Jay_W’s Mazda (2) 1990 protege awd

A pair of AWD Proteges. The street car has a complete 323GTR drivetrain swap from the lugnuts to the valve cover, running on a Link standalone and lots of other mods. Roughly 320 HP at the wheels, it’s a very fun sleeper. Rallycar is still …

11 of 100 more

  • 17 Votes
  • Five Comments
  • No Updates

tmd34’s 1995 Mazda miata

scca road racer EP

12 of 100 more

  • 16 Votes
  • Five Comments
  • One Update

92CelicaHalfTrac’s 1990 Mazda MX6 GT Turbo

Purchased for entry in the $2010 GRM Challenge, now serving as DD, total budget still under $1600. Mods as follows: Supra CT26 50trim turbo Supra 440cc injectors Walbro 255lph HP Fuelab 6AN inline fuel filter Aeromotive 13109 AFPR ZombieSS 440 Revision II ECU South Bend …

13 of 100 more

  • 16 Votes
  • Six Comments
  • No Updates

carreratwo’s 1991 Mazda Miata

52 Dangerous Curves Sherrie Schaeffer 1991 Mazda Miata SM

14 of 100 more

  • 16 Votes
  • Two Comments
  • Two Updates

perryrace’s 1999 Mazda Miata

99 Mazda Miata - Purchased as a damaged roller (no drive train or interior) for $500. The roller was then stripped down to a bare tub and the front core support replaced. The wind shield driver side pillar had also been dented this was also …

15 of 100 more

  • 15 Votes
  • Nine Comments
  • Five Updates

splitime’s 1993 Mazda Miata

A few years back I had built up a very fun track toy based on a 92 civic hatchback. Enjoyed it on track for a few years and then reconsidered the money I had caught up in such a theft target. So I went to …

16 of 100 more

  • 15 Votes
  • Three Comments
  • One Update

rpmchris’s 2006 Mazda MX-5 Sport 6-speed

Daily driver and 2009 SCCA Solo Nats CSPL autocross champion! 2006 Sport model, 6-speed, 18x10” Enkei RPF1 wheels with 295/30ZR18 Hoosier A6 tires (18x9.5” RPF1s with 275/35 Hoosier H2O WET rain setup), AST 5220 coilovers with w/Hypercoil springs, Hotchkis front swaybar, Sniper Tuning ECU reflash …

17 of 100 more

  • 13 Votes
  • Two Comments
  • Two Updates

RoadWarrior’s 1994 Mazda Miata

Base package, De hood leprosy-d via a new paint job, Garage Vary front lip, robbins canvas soft top. Konig Daylite wheels. Soon to have Flyin Miata springs, Fatcat Motorsports strut mounts, Jackson Racing swaybars, Racing Beat swaybar mount brace, Hard Dog Ace rollbar. And of …

18 of 100 more

  • 13 Votes
  • Two Comments
  • One Update

Mellis112’s 1993 Mazda Miata 402 V8 575hp 6spd

1993 Miata V8roadsters kit, All aluminuim small block LS series engine SLP 402 (6.6 liter) short block Callies crank Manley rods and pistons, Dart heads, Comp Cams 244 XER cam (New cam this winter 625 lift with custom headers and new exhaust), Fast intake and …

19 of 100 more

  • 13 Votes
  • Five Comments
  • No Updates

HarrisburgDDR’s 1975 Mazda Chantez GL

One of the oddest cars on the road, the Chantez is a JDM car never sold officially outside of Japan. Under the hood lives a 360cc 2-stroke twin driving the rear 10” wheels through a 4 speed floor shift. Adding to the rarity is the …

20 of 100 more

  • 12 Votes
  • Four Comments
  • Three Updates

aussiesmg’s 1984 Mazda RX5.0

5.0 EFI with Trick Flow heads, roller rockers, pushrods, double row timing chain, Milodon pan, Holley systemax II, and much more. T5 trans, GSL-SE brakes, coilovers, koni shocks, and more More on Cardomain under aussiesmg It’s alive

21 of 100 more

  • 12 Votes
  • Two Comments
  • One Update

pjr300’s 1985 Mazda RX-7 Turbo (1st Gen)

1985 RX-7 1st Gen with “old school” Cartech Turbo kit. About 350 hp at the crank! Original paint and interior, significantly updated suspension. Only one prior owner, 77,000 miles.

22 of 100 more

  • 12 Votes
  • Two Comments
  • Nine Updates

Bandit116’s 1982 Mazda Hill Climb Special

The car is called the “BANDIT”. It was a one off built by Jerry Keif, specifically to run the Hills. Rotary powered with a 13b bridgeport. The car holds many records up and down the East Coast. The large wings generate a tremendous amount of …

23 of 100 more

  • 11 Votes
  • Two Comments
  • No Updates

CarKid1989’s Mazda Miata

1994 Miata M Edition. -150,XXX miles -Tokico Illumina struts -FM springs -FM sway bars -FM rear strut mounts -Sumitomo HTR200 tires -EXIntake cam swap -Escort GT motor Next up: -Fix rocker rust -fix any rust -MORE AUTO X

24 of 100 more

  • 11 Votes
  • Two Comments
  • No Updates

Kubotawally’s Mazda 1974 Rx4

Former SCCA ITA Now the “Furry 4” It’s “Fast and Furrious” Recently photographed at Road Atlanta SCCA ARRC

25 of 100 more

  • 11 Votes
  • One Comment
  • No Updates

Don49’s 1990 Mazda RX7

E Production SCCA racecar. Prather Racing motor, coil over suspension, PBS trans. Prepared by Classic Auto, Orrtanna, Pa. 3rd in SCCA Northeast Division 2007 and 2008.

26 of 100 more

  • 10 Votes
  • Seven Comments
  • No Updates

Wowak’s 1991 Mazda Miata #91STS2

1991 British Racing Green #3716 of 4000, Yellow stripe, yellow wheels, KYB AGX adjustable shocks, Racing Beat solid front swaybar, Falken Azenis RT615, OBX 4-2-1 header, cone filter, Moss “Cobra” style bar, home-made turn-signal intakes (gutter guard,) driver’s seat foamectomy, weighted oem wooden shift knob, …

27 of 100 more

  • 10 Votes
  • Four Comments
  • One Update

Greg Voth’s 1979 Mazda RX-7

My other RX-7. Picked it up a while ago from Kansas City and drove it down here to Florida. 24 mpg at 75 mph from a rotary??? Mostly stock except for the exhaust and coil-overs. Little rusty and has a bent rear axle. Been sitting …

28 of 100 more

  • 10 Votes
  • Four Comments
  • No Updates

abrracing’s 1990 Mazda RX-7

1990 RX-7 13B peripheral port, Mazda comp 4spd trans, BFG R1 tires! Car run in GT racing in Canada

29 of 100 more

  • 10 Votes
  • Five Comments
  • No Updates

DLingenfelter’s 1997 Mazda Miata

Ebay coilovers, Koni/KYB shocks (Kyb front, Koni rear), Flyin Miata front swaybar, home made air intake, Hard Dog Hardcore rollbar, Hardtop, previously ran black oem daisy wheels with Azenis, now run 15x7 Rota RB’s with Dunlop Z1 Star Specs. The picture is from last year …

30 of 100 more

  • 10 Votes
  • Two Comments
  • No Updates

LS2V8Miata’s 1994 Mazda LS2 V8 Miata

SEE Speed-Channel GEARZ TV segment on my car; http://www.youtube.com/watch?v=P3bf-k0NsWk My car is a 1994 Laguna Blue Mazda Miata I purchased from the original owner and campaigned it in NASA, SCCA and ProAutoSports events for years. I used the body & glass and built a one-off …

31 of 100 more

  • 10 Votes
  • Four Comments
  • No Updates

Mazdax605’s 1974 Mazda REPU

Mostly stock aside from alloys,lowered ride height,header,RX-7 5-speed.

32 of 100 more

  • Nine Votes
  • Three Comments
  • No Updates

Armitage’s 1993 Mazda RX-7 Twin Turbo

1993 Touring, Purchased in 2006 for $8500, Track/AutoX Toy I purchased this car from a local motivated seller in bone stock condition. It came with a recently rebuilt motor from Peter Farrell Supercars, two sets of wheels and a catback exhaust as part of the …

33 of 100 more

  • Nine Votes
  • Two Comments
  • No Updates

aussiesmg’s 1984 Mazda RX7

This is the other RX7, free car, I have plans for this one, so far a cage has been installed. I have also aquired a 406ci SBC making over 500hp which will be midmounted and a 9” custom built for a 1st gen RX7. I …

34 of 100 more

  • Nine Votes
  • Three Comments
  • No Updates

Salanis’s 1994 Mazda Miata

94 Miata. Responsible for getting my girlfriend and my dad out on track and hooked on autosports. Nicknamed The Dirty Track Slut. Slut because it usually sees at least two drivers at any given event. The extra pictures show how it got christened with the …

35 of 100 more

  • Nine Votes
  • Three Comments
  • No Updates

Stealth7’s Mazda RX-7

1982 Mazda RX7 setup for CSP autoxing. GForce Panhard/Trilink, GC coilovers/camberplates, RB Streetport Exhaust, Lightweight Flywheel, 13x7 panasports with V710 tires, Recaro SRD Seat, Autopower Rollbar, etc. I can trace the history of this car back to the original owner, will hopefully keep this one …

36 of 100 more

  • Nine Votes
  • Two Comments
  • No Updates

hotg54b’s 1993 Mazda RX-7

I’ve owned her since 1995 and have been autocrossing for the last 8 years. Installed some basic performance bolt-ons and upgraded the suspension. Still running the original motor and dynoed at 277 rwhp @ only 10psi on stock twins.

37 of 100 more

  • Nine Votes
  • Five Comments
  • Three Updates

stereoking15’s 1994 Mazda mx3

1994 mazda mx-3 gs v6 Drivetrain: jdm klze 2.5L motor 200hp stock now around to 240hp at the crank. Pacesetter headers, modified fuel rail for adjustable fuel pressure regulator, hei mod using accel gm 4 pin ignition module and msd blaster 3 coil, custom 3” …

38 of 100 more

  • Nine Votes
  • Three Comments
  • Three Updates

PeteWW’s 1993 Mazda RX-7

Sad, very sad. My tired FD has been in neglected hibernation for going on 5 years, coincident with the birth of my twin daughters. The hard work of returning it to the street was begun last month. Just about everything on the car was needing …

39 of 100 more

  • Nine Votes
  • Five Comments
  • One Update

Tim Baxter’s 2002 Mazda Miata

This is my more or less bone-stock 2002 Miata. Not much of note, other than it’s a Miata and the wicked cool GRM windshield banner, but I thought I should share.

40 of 100 more

  • Nine Votes
  • Three Comments
  • No Updates

darcyw’s 1988 Mazda 323 GTX

2nd owner. Always wanted a GTX and found a prime, unmolested example while in professional school. Just put it back on the road this year after an extensive freshening. Pedders struts, 375F/300R ground control coilover, camber bolts, new performance pads, shifter bushings, J-intake pipe, custom …

41 of 100 more

  • Nine Votes
  • One Comment
  • No Updates

oryxx’s 1993 Mazda RX7

Company Race Car/Daily Driver: - 1991 Toyota 1JZ-GTE engine, completely unmodified - Custom front and rear subframe, with independently mounted rear differential - The factory steering rack location is unaltered, with a modified factory hood to accommodate the taller engine - Power steering and air …

42 of 100 more

  • Nine Votes
  • Two Comments
  • No Updates

66etype’s 1992 Mazda Jagzda

1992 Mazda Miata with 5.3 litre Jaguar sohc v 12.

43 of 100 more

  • Nine Votes
  • Two Comments
  • One Update

pysop7’s 1982 Mazda RX7

12a 5spd completely stock, except the paint job

44 of 100 more

  • Nine Votes
  • No Comments
  • Three Updates

GeneSplicer’s 1991 Mazda Miata Turbo

If you like it, vote up! Turboed stock 1.6L - T3 Garrett with .42ar/60trim compressor putting 274rwhp/244tq@20psi; Megasquirt PnP management; 430 supra injectors; DW300; TurboSmart BOV, WG, and E-street controller; MTuned coolant reroute; OS Giken LSD; cheap GodSpeed radiator and intercooler; 25row oil cooler; Exedy …

45 of 100 more

  • Eight Votes
  • One Comment
  • Six Updates

RexSeven’s 1987 Mazda RX-7

My first sports car, a 1987 Mazda RX-7 GXL. 109K on the chassis, 21K on a rebuilt 13B rotary Mods: Engine: K&N air filter, Racing beat cat-back exhaust Suspension: Koni adjustable struts Brakes: Corksport stainless steel brake lines, Brembo brake rotors, Hawk HPS brake pads …

46 of 100 more

  • Eight Votes
  • Four Comments
  • No Updates

Clay’s 1993 Mazda Miata - 1993

5spd, White/Tan with Tan Leather, 215k miles. 94 brakes with Hawk HPS pads. Being replaced by my new 96 Miata.

47 of 100 more

  • Eight Votes
  • Four Comments
  • 18 Updates

ZOOMX5’s 1994 Mazda MX-5

1994 Laguna Blue MX-5. Robbins glass window top, 16” ASA AR-1 wheels, Yokohama S-Drive tires, Moss performance brake kit.

48 of 100 more

  • Eight Votes
  • One Comment
  • No Updates

turbellion’s 1983 Mazda rx-7

13b re-egi swap, super fun car

49 of 100 more

  • Eight Votes
  • Two Comments
  • No Updates

gravityfed’s 1982 Mazda Rx-7

This is my 1982 RX-7 project that has been in my possession twice now. Start for its first time in April (video below). I have probably over 150 hours of time into the car. Still being tuned, still being improved. Rocking Historical plates btw! Mod …

50 of 100 more

  • Eight Votes
  • No Comments
  • No Updates

nickt93’s 1995 Mazda Miata - FMII Turbo

  • Flyin’ Miata II Turbo Kit; Link ECU, GT2560R - JIC Magic FLT-A2 Monotube Coilovers - Porsche Mint Green paint (Dupont base/clear) - Flyin’ Miata dual exhaust - AEM wideband O2 sensor - Racing Beat 1.25” front swaybar - Hard Dog Hard Core Double Diagonal …

51 of 100 more

  • Seven Votes
  • Four Comments
  • No Updates

atlantamx3’s Mazda MX-3 RS

1992 Mazda MX-3 with a 1.8L BP Swap from a 90-94 Mazda Protege.

52 of 100 more

  • Seven Votes
  • One Comment
  • No Updates

David S. Wallens’s Mazda Miata

We originally did the ‘92 Miata as a magazine project car, but I just can’t get rid of it. Lately I have been running it in CSP. (And yes, some of you will probably recognize these wheels.)

53 of 100 more

  • Seven Votes
  • No Comments
  • No Updates

Nomad’s Mazda Protege5

Eibach Pro Kit Springs. Racing Beat exhaust from a Mazda MP3, custom fit. Short shifter and KartBoy shift bushings. Rear Strut tower brace. 17x7 wheels. Mazda 6 rear wiper retrofit Shorty Antenna. 35% Tint. “It’s a sporty grocery getter.”

54 of 100 more

  • Seven Votes
  • Five Comments
  • No Updates

maengelito’s Mazda Miata - unlike any other GRM Miata

well, thats not true, but it did get you to click on this Miata as opposed to all the others up here. Its got basic bolt ons that make it fun and/or safe for track duty.

55 of 100 more

  • Seven Votes
  • Three Comments
  • No Updates

Tom Heath’s Mazda Miata

This is the fast car of the family. Voted most likely to be found upside down by my wife.

56 of 100 more

  • Seven Votes
  • No Comments
  • One Update

modernbeat’s Mazda Miata

Base model 1991 Mazda Miata prepped to the limit for SCCA STS2. New Mazda Motorsports engine, shaved head, SP intake, RB header, Enthuza custom exhaust, Koni 2812 shocks, Hypercoil 700/450 springs, RB front bar, delrin bushings, Kirkey Deluxe seat, SSR and RPF1 wheels, and custom …

57 of 100 more

  • Seven Votes
  • Two Comments
  • Two Updates

kcbhiw’s 1990 Mazda Miata

1990 Mazda Miata Built for SCCA CSP SOLO competition –––––— Engine –––––— New ‘01-ish 1.8L w/VVT Swap -0.020” Pistons -Decked Head -Balanced Bottom End Racing Beat 4-1 Header Custom Exhaust with Dynamax Resonator and post-driver dump pipe Custom Intake Piping Megasquirt MSnS-E Standalone with Launch …

58 of 100 more

  • Seven Votes
  • Two Comments
  • No Updates

bikedad’s 1986 Mazda RX5.7

My 1986 Mazda RX7 Conversion Chevy 355 T5 5 Speed Transmission Stock Mazda TII Diff 4:10

59 of 100 more

  • Seven Votes
  • Three Comments
  • No Updates

FIsedan06’s 2006 Mazda 3 turbcharged sedan

This car belches flames out of the tailpipe and can break the wheels loose in 3rd on the high boost setting, and the coilovers keep it handling flatter than my husband’s ‘08 STI with springs. Performance Modifications: *Tripoint Engineering Turbo kit with front mount intercooler …

60 of 100 more

  • Seven Votes
  • One Comment
  • One Update

pg’s 1992 Mazda MX-3 GS

Swapped 2.5 v6, 200hp, originally came with a 1.8 v6 with 130hp, 17” Centerline Storm, powdercoated black http://www.dragtimes.com/Mazda-MX3-Timeslip-6597.html Following S2000 on Deals Gap Tail of the Dragon http://ca.youtube.com/watch?v=YL8LJwzuW3E

61 of 100 more

  • Seven Votes
  • Four Comments
  • One Update

Capt Slow’s 1996 Mazda Miata

New to me 1996 Mazda Miata. She is currently bone stock. I am planning on installing a roll bar and then using her at track, drift and autocross events… This is my first miata and I am already deeply in love with this car.

62 of 100 more

  • Seven Votes
  • Six Comments
  • Three Updates

karlt_10’s 2005 Mazda Mazda6S wagon

MSDS headers / Magnaflow cat / Racing Beat mufflers / WeaponX ignition coils / MazdaSpeed springs / KYB GR-2 shocks / MazdaSpeed sway bars / Racing Beat end links / GT Spec trailing braces / Steeda shock tower brace / StopTech brake lines / HAWK …

63 of 100 more

  • Seven Votes
  • Five Comments
  • Five Updates

Teqnyck’s 1990 Mazda Protege

A fairly rare car, the AWD Mazda Protege is the non-turbo lame duck cousin to the Familia GTX and GTR available elsewhere in the world. My car is slowly but surely being added upon and upgraded as my funds allow. Soon to be mods include …

64 of 100 more

  • Seven Votes
  • Four Comments
  • No Updates

Mazdax605’s 1979 Mazda RX-7 GS

Early production GS which is mostly stock,and in great shape.

65 of 100 more

  • Seven Votes
  • No Comments
  • No Updates

RexSeven’s 1986 Mazda RX-7

1986 Mazda RX-7 Sport model with a (botched) JDM S5 Turbo II engine swap and a massive list of modifications. I’ll put another S5 Turbo engine in it… someday…

66 of 100 more

  • Seven Votes
  • No Comments
  • No Updates

ArthurDent’s 1973 Mazda 808

My 1973 Mazda 808 which is the piston powered equivalent of the Rx-3.

67 of 100 more

  • Seven Votes
  • Four Comments
  • No Updates

schmoo’s 2004 Mazda Mazdaspeed MX-5

My pride and joy. Bought her in 2008, made her plenty quick in 2009, and now battling between the desire to go faster and keep her street friendly. We can be found at tracks and autox events around Ottawa, Montreal, and Kingston.

68 of 100 more

  • Seven Votes
  • Two Comments
  • No Updates

NineLivesJohnny’s 1999 Mazda miata

1999 miata with a ls1 engine. we have 330rwhp and 2400lbs so far. we are looking to improve those numbers as we run auto-x and nasa time trials.

69 of 100 more

  • Six Votes
  • No Comments
  • One Update

VitaminJ’s 1996 Mazda Miata

This is my 1996 Miata daily driver. I love this car. I bought it with 67k miles, after 3 years it’s got 125,000 and feels like when I bought it. So far it’s got an intake, 4-2-1 header, and a cat back exhaust. I also …

70 of 100 more

  • Six Votes
  • Three Comments
  • No Updates

nderwater’s 1999 Mazda MX-5 Miata turbo

  • 43,668 original miles, second owner * AVO Stage 2 Turbo system with intercooler and Link ECU * Enthuza custom fabricated stainless exhaust * Custom 8 speaker stereo system with 12 disk CD changer

71 of 100 more

  • Six Votes
  • One Comment
  • No Updates

Powar’s Mazda Miata

My 1990 Mazda Miata STS2 autocross car… *Body completely straightened, rust repaired, repainted Velocity Red Mica. 15x7 ATS DTC Comp Lights Falken Azenis RT-615s Ground Control Coilovers Koni Yellows RB Intake & Header MazdaSpeed/Bosal Cat-Back

72 of 100 more

  • Six Votes
  • Three Comments
  • No Updates

P90Puma’s Mazda Miata 1.8L

1994 Base. The infamous, P90Puma build thread that kills internet connections and browsers: http://grassrootsmotorsports.com/forum/grm/p90pumas-build-thread-1994-miata-garrett-t3-reup-5/599/page1/ Installed/Installing Visual: Hardtop, Fresh Paint, Fender Flares, R-package Front Lip, R-package Rear Trunklid spoiler, Mazdaspeed Polished Tow Hooks, Blue Forged Aluminum Lugnuts, BRP Aluminum Pedal Set, Alpine 120w Speakers, Safety: Autopower …

73 of 100 more

  • Six Votes
  • No Comments
  • One Update

MA2LA’s 1984 Mazda SPEC RX7

I bought the car so i could go racing. I had a couple FBs when i was younger and now that I can afford to enjoy life a little it was a no other choice for me. It was already setup under Spec rules so …

74 of 100 more

  • Six Votes
  • No Comments
  • One Update

Capt Slow’s Mazda Mazdaspeed6

This is my 2006 Mazdaspeed6. My primary image is that of my wife hooning the boat at our local autocross (her first). I have done very few things to the car. * Adjustable ball joints at the front for camber adjustment * Whiteline rear sway …

75 of 100 more

  • Six Votes
  • Two Comments
  • No Updates

SATimko’s Mazda Protege5

Mazdaspeed B-spec springs AWR 21.5mm rear sway bar Mazdaspeed Protege 17” Racing Hart wheels Falken Azenis RT-615s Corksport Axleback exhaust Kartboy short shifter

76 of 100 more

  • Six Votes
  • One Comment
  • One Update

matt’s 2008 Mazda mazdaspeed3

as of now mods list only contains spc rear adjustable links, amsoil fluids, kn panel filter, goodyear eagle f1 asy 225-40-18, and the special go fast GRM stickers (that didnt help with me off road excursion).lol now im trying to decide if i should put …

77 of 100 more

  • Six Votes
  • Four Comments
  • One Update

matt147’s 1994 Mazda Miata

Its kind of a beater but it was a California car for only $1500 so I couldn’t pass it up. So far it has Tein Flex coilovers, Flyin Miata sway bars, a HDHTDD bar, JDM Invidia exhaust, 95M seats with Euro market black cloth skins, …

78 of 100 more

  • Six Votes
  • Four Comments
  • One Update

fastslarti’s 1992 Mazda Miata

92 Classic Red NA. FM Springs & Sways, KYB AGX Shocks, FCM Bumpstops, Energy Suspension Bushings, 1.8BP Swap w/FM Kit, Borla Exhaust w/FM High-Flow Cat, Hard Dog Hard Core Roll Bar, Corbeau Forza Seat w/Simpson 6pt. Harness, Momo Race Steering Wheel, Voodoo Aluminum Shift Knob.

79 of 100 more

  • Six Votes
  • Two Comments
  • One Update

Highway8’s 2007 Mazda RX8

This Velocity Red 2007 RX8 Sport is used about 100 miles per week as adaily driver with carseats instalIed, but about once every 2 months the car makes it to Thunderhill Raceway for track days. Exterior Mods: Full Mazdaspeed Body Kit, Seibon TS CF Vented …

80 of 100 more

  • Six Votes
  • One Comment
  • One Update

dollraves’s 1988 Mazda 323 GTX ($2006,$07, $08 Challenges)

This GTX was originally owned by MazdaSpeed racer Roger Mandeville. Salvaged in 2000, it was beaten into the ground by a college student before finally making its way into my hands. I can’t say I’ve treated it any better, but I’ve had one hell of …

81 of 100 more

  • Six Votes
  • Three Comments
  • No Updates

ROTARY_X_7’s 1994 Mazda RX-7

94 Brilliant Black RX7 - w/40K miles Tan Leather with a 5 speed & the orignal 13-BREW Rotary Mods include: PFC (Steve Kan Tuned with 346 RWHP and 310 Trqe) with Stock Twins pushing 15 PSI. 550cc Primaries, 1200cc Secondaries with a Cosmo Fuel Pump. …

82 of 100 more

  • Six Votes
  • One Comment
  • No Updates

Supra9726’s 1988 Mazda 323 GTX

Stock with a 2.5” exhaust

83 of 100 more

  • Six Votes
  • Three Comments
  • No Updates

pafred’s 1993 Mazda Protege V6

GR2 struts,lowered,mazdaspeed front strut mounts,slotted rotors, hawk pads,swaybars,momo wheel,mx-3 seats,K8 V6,RX-7 radiator,light flywheel,corksport cat back,MX-3 V6 rack

84 of 100 more

  • Six Votes
  • No Comments
  • 11 Updates

dollraves’s 1988 Mazda 323 GTX ($2010 Challenge)

I bought this GTX in November, 2008, from Christian L. in Salt Lake City, UT. After moving cross-country twice since then, I finally started the rebuild on August 7th, 2010, for the $2010 GRM Challenge in October!

85 of 100 more

  • Six Votes
  • No Comments
  • One Update

KATYB’s 2003 Mazda 6s non sport 5sp mtx

sport appearance package, 17/7.5 wheels 245 45 17 tires. stock brakes with hawk hp+ pads, megan racing springs,tokico blues, racing beat sway bars, headers, full exhaust, intake, pnp heads and lower intake mani,hids in lows and fogs,smoked led side and rear reflectors, claim to fame …

86 of 100 more

  • Five Votes
  • One Comment
  • No Updates

Wowak’s 1990 Mazda Miata #1919 (Juliette)

Ok, this isn’t my car, its Kara’s, but I accept a large amount of responsibility for it (I kinda paid for it, and the only work on it that I didn’t do myself was the paint and body work.) Major mods are the Flyin’ Miata …

87 of 100 more

  • Five Votes
  • Two Comments
  • No Updates

jezeus’s Mazda 626 GT Turbo

My daily driver for a few years, currently parked with a rear main seal leak

88 of 100 more

  • Five Votes
  • Three Comments
  • No Updates

matt_fulghum’s Mazda 1992 MX-3 RS

Where do I start? It’s a ‘92 Mazda MX-3 RS, with a ‘91 Protege LX engine, and a ‘93 Protege LX transmission. The engine’s been bored 2mm over to 85mm x 85mm, with 11:1 Wiseco pistons, but the head and block have been decked slightly …

89 of 100 more

  • Five Votes
  • Two Comments
  • No Updates

Stargazer’s 1995 Mazda Miata

Just another $1500 miata turned into a budget racer. I’ve added GC coilovers, JR sways, HD rollbar, Azenis for street, A3S05’s for autocross and other miscellaneous odds and ends.

90 of 100 more

  • Five Votes
  • No Comments
  • No Updates

Rumnhammer’s Mazda Miata

My 94 Miata R package with turbo system added, custom exhaust soon to have Tein Flex coilovers etc etc.

91 of 100 more

  • Five Votes
  • Two Comments
  • Four Updates

johnhammer’s 2001 Mazda Miata LS

This is my 5th Miata; an ‘01 LS that I bought in December ‘06 with 4,300 miles on it! That’s right; it was essentially a brand new 5 year old car. Since I also own a Spec Miata racecar, I’ve kept the mods to daily …

92 of 100 more

  • Five Votes
  • One Comment
  • Five Updates

YaNi’s 1987 Mazda RX-7 GXL

I purchased this nearly rust free specimen in February 2009 to be used as a donor shell. It started its life as a luxury model with the optional slushbox. Once the engine bay is painted I am installing a complete S5 non-turbo drivetrain from my …

93 of 100 more

  • Five Votes
  • No Comments
  • No Updates

sammm’s 1995 Mazda Miata M-Edition

Autocross toy

94 of 100 more

  • Five Votes
  • One Comment
  • No Updates

Monkeywrench’s 1990 Mazda Miata

1990 Mazda Miata Engine: Mazdacomp. Bosal “Spec Miata” cat-back Sutton “Straight Shot” intake 14+ timing bump Suspension: R Package Bilsteins (revalved by Bilstein USA) Ebay sourced thread purches 450lb f / 275lb r springs 7/8” FM front bar / stock rear FCM NB shock hats …

95 of 100 more

  • Five Votes
  • No Comments
  • No Updates

La Vieja Escuela car club’s 1983 Mazda rx7

83 mazda rx7 I am in the prosess of making a race car out of it

96 of 100 more

  • Five Votes
  • Three Comments
  • No Updates

SVreX’s 1988 Mazda 323 GTX

Most fun I’ve ever had with an old Japanese girl, and a young hispanic lady!

97 of 100 more

  • Five Votes
  • Three Comments
  • No Updates

scannon’s 1992 Mazda Miata

1992 Sunburst Yellow Miata. Engine is a ‘97 1.8 block bored to 1.9 with forged pistons and rods, balanced, ‘99 head, ported and polished, FM II turbo kit with 3071 Garret turbo. FM turbo single exhaust system. Transmission is a 5 speed from a ‘95 …

98 of 100 more

  • Five Votes
  • Three Comments
  • No Updates

MarioLento’s 1992 Mazda Miata

Turbo, Flyin’ Miata stuff including Brace, Spec Miata Suspension, 8/15/225 Rubber

99 of 100 more

  • Five Votes
  • No Comments
  • No Updates

rx7kevin’s 1982 Mazda RX7

This Mazda was my first car at age 16 and has made the steady move up from autocross to road racing ever since. It currently is an SCCA Pro-7 and NASA Performance Touring F car. It’s in the winners circle (including the 2009 NASA Championships) …

100 of 100 more