J.A. Ackley
J.A. Ackley Senior Editor
10/28/24 4:56 p.m.
feature_image

Who set one of the 10 new records at the 2024 Tire Rack SCCA Time Trials Nationals? Our own Andy Hollis, and he did so in the “little brother” to the One Lap Honda CRX.

[Ten track records fall at the Tire Rack SCCA Time Trials Nationals]

Andy turned a 2:16.379 lap, a record for the Max 5 class, and it …

Read the rest of the story

dean1484
dean1484 GRM+ Memberand MegaDork
10/28/24 7:41 p.m.

One of our own here on GRM won his class in an M3.  I am proud to say that he regularly kicks my but when we race on line. 

A big congratulations to Matt!!!!!

RacingComputers
RacingComputers GRM+ Memberand HalfDork
10/28/24 8:47 p.m.

Congratulation to Both of them for a great accomplishment

dean1484
dean1484 GRM+ Memberand MegaDork
10/28/24 8:49 p.m.

And I was just informed that we have a second class winner and class lap record setter in our midst. And he definitly has taught me a thing or three while racing on line.  Congratulations to Trevor in his Mustang!!!  

Andy Hollis
Andy Hollis
10/28/24 9:35 p.m.

If you look closely, you can see why this chassis was $400.

The fenders were indeed pristine...mostly because they were new from a repair job.  wink

The car has been punched pretty hard in the nose, setting the bumper back 1".  The LF frame horn is also pushed down 1".  I had to shorten one of the suspension arms by 1" to get it to align.  The RR corner has also suffered an impact and has some major Bondo installed. And finally, the spare tire well is rusted through with a cheapo fiberglass repair job done to it.

On the bright side, the LR corner is perfect and the car is pretty square between the four wheels. 

 

dean1484
dean1484 GRM+ Memberand MegaDork
10/29/24 8:19 a.m.

In reply to Andy Hollis :

This is something that I find just amazing. 
 

Andy shattered the previous record by a whopping 3 seconds. He also remains undefeated in all 7 years of the Time Trials Nats, competing in a variety of cars and classes.

 

Congratulations on another win!!!  
 

We did a similar build back in the 90s but we used a dodge Omni that we basicly gutted and then put a GLH motor in. Ultra light FWD race cars are so much fun and can be extremely fast. Reading your build that car sounds like it is amazing.   
 

Couple of questions. 
 

1. How do you drive it?  Is it smooth and gentle or drive it like you stole it with hard fast inputs. 
 

2. How is the torque steer?  
 

3. What was the best upgrade other than the motor?  
 

Thanks !!!

 

 

David S. Wallens
David S. Wallens Editorial Director
10/29/24 9:11 a.m.

Yes, much congratulations. And HASPORT has the coolest logo. 

Andy Hollis
Andy Hollis
10/29/24 10:22 a.m.
dean1484 said:

Couple of questions. 
 

1. How do you drive it?  Is it smooth and gentle or drive it like you stole it with hard fast inputs. 
 

2. How is the torque steer?  
 

3. What was the best upgrade other than the motor?  
 

Thanks !!!

 

 

1) I drive all my cars smooth, not because I'm not making hundreds of corrections constantly to keep it on the limit, but because those inputs are super small.  So from the outside, it looks smooth.  I'll link that record lap below so you can see.

2) Torque???  Ha-ha-ha.  You're funny.  :)  These engines have no torque.  Think S2000 AP1.

3) Single best upgrade is the aero.  Was worth two full seconds over no aero, and over a second compared to the typical flat splitter and small wing.  Also made the car easier to drive.

 

stafford1500
stafford1500 GRM+ Memberand Dork
10/29/24 10:42 a.m.

In reply to Andy Hollis :

So, what aero mods did you make...? Hopefully some of our email conversations made it to the car.

Congrats on the win and the new record.

Andy Hollis
Andy Hollis
10/29/24 11:41 a.m.
stafford1500 said:

In reply to Andy Hollis :

So, what aero mods did you make...? Hopefully some of our email conversations made it to the car.

Congrats on the win and the new record.

The aero mods were simply bolting on the Zebulon parts from the One Lap car.  Big wing and splitter.

The hood vent wicker we discussed did not happen...yet.  Once I painted the hood white (cuz Tom said to for the sake of photos), it was crystal clear just how rough it is.  Needs a day's worth of Bondo work.  So I figure I'll do the wicker at the same time.

dean1484
dean1484 GRM+ Memberand MegaDork
10/29/24 6:01 p.m.

In reply to Andy Hollis :

Great Lap, and yes, it looks very smooth. There were no tire noises at all that I could hear. It is interesting to watch the lap that Racebrick posted of his class record driving the Mustang and compare it to yours. He is manhandling the car just enough to extract the maximum from it, while your lap looks much more calm and smooth. However, you are still using every inch of the track and staying at 10/10ths 100 percent of the time. This is a really interesting comparison.  

Thanks for the insight about the aero.  2 seconds is a ton of time!!!

Andy Hollis
Andy Hollis
10/30/24 6:53 a.m.
dean1484 said:

In reply to Andy Hollis :

Great Lap, and yes, it looks very smooth. There were no tire noises at all that I could hear. It is interesting to watch the lap that Racebrick posted of his class record driving the Mustang and compare it to yours. He is manhandling the car just enough to extract the maximum from it, while your lap looks much more calm and smooth. However, you are still using every inch of the track and staying at 10/10ths 100 percent of the time. This is a really interesting comparison. 

I don't know what tires he's on but I suspect RE71RS or CRS V2, based on the sounds.  I'm on A052, which are typically fairly quiet until you overdrive them.

Also, he's using quite a bit of curb, while I am avoiding them (except Deception).  With big aero, it's typically quicker to carve the larger turn then to cut the corner.  It's all about maintaining "platform" for aero effectiveness.  Too much curb, and the aero advantage goes away until the car settles.  Kinda like having lube on the apex curbs.

Chris Tropea
Chris Tropea Associate Editor
10/30/24 9:24 a.m.

Congrats to Andy on the win! It was awesome seeing him wheel the CRX around NCM. We also shot a video feature with Andy on the CRX while we were at the track so keep an eye out for that coming to the GRM YouTube page soon. 

Tom1200
Tom1200 PowerDork
10/30/24 11:09 a.m.

In reply to Andy Hollis :

The fact that you took a scruffy beat car and got that result with it makes it even more awesome.

You'll need to log in to post.

Our Preferred Partners
RjqKSO48zXNQivPub0Y7E50r5Gia5U4WT6i9qfJeHfBdpFIwAL8Iah3e6YEnATDx