Oil Pan
It's probably easier to make an oil pan than to make the stock one shallow enough and still have it work.
Started on April 11 by LocostSmitty
Locost 7 clone with Rover Aluminum V8. Some body parts and most of chassis is Tiger Avon from England Parts from about everything in the driveway or local Junk yard
It's probably easier to make an oil pan than to make the stock one shallow enough and still have it work.
The key to getting a Rover V8 into this chassis is to lower it. Cut off anything that sticks below the bottom of the transmission. This means, shortening or making a shallow oil pan. You'll also need to use a ...
These headers are a first attempt by a guy with no training and homemade tools (not bad eh!) I had them coated by Motorsport Coatings in Delavan, Wis.
Drivetrain all in, start plumbing and wiring
Alum Rover V8 rebuilt with Buick parts
Parts cut from kit car body, the rest hand fabbed aluminum
You must be registered and signed in to comment.
Also get your instant access to the digital edition of Grassroots Motorsports Magazine!
Learn More
Comments