16vCorey
16vCorey PowerDork
10/30/14 12:09 p.m.

We just got this car in at work (AAA Auto Parts inc.). The engine is already sold, but everything else is still available. Here's a list of all the goodies that it had on it. Let me know if you need anything! 1-800-288-6787, ask for Corey.

http://evansville.craigslist.org/ptd/4738702091.html

Mr_Clutch42
Mr_Clutch42 Dork
10/30/14 1:05 p.m.

Is the chassis straight?

16vCorey
16vCorey PowerDork
10/30/14 1:08 p.m.

Other than the radiator support and maybe the front of the right apron, the body is really straight. It was hit pretty high, so the front frame horns were spared. the passenger side headlight area took most of the hit.

patgizz
patgizz GRM+ Memberand PowerDork
10/30/14 9:13 p.m.

damn i need that scoop but it's not challenge budget friendly.

Brett_Murphy
Brett_Murphy GRM+ Memberand UberDork
10/31/14 9:47 p.m.

What is the diameter on the swaybars (front and rear)? I was just considering buying a beefier front bar yesterday.

16vCorey
16vCorey PowerDork
11/1/14 8:51 a.m.

Not sure, but I'll measure them when I get back to work on Monday and post the answer.

Brett_Murphy
Brett_Murphy GRM+ Memberand UberDork
11/1/14 9:38 p.m.

Thanks. Front should be 25mm I think and rears came in a few different sizes.

NGTD
NGTD SuperDork
11/2/14 8:09 a.m.
Brett_Murphy wrote: Thanks. Front should be 25mm I think and rears came in a few different sizes.

If its stock:
- 02 WRX rear bar - 20 mm
- 03+ WRX rear bar - 17 mm

Woody
Woody GRM+ Memberand MegaDork
11/2/14 10:16 a.m.
Brett_Murphy wrote: What is the diameter on the swaybars (front and rear)? I was just considering buying a beefier front bar yesterday.

WRXs need a fatter rear bar, not a bigger front.

Brett_Murphy
Brett_Murphy GRM+ Memberand UberDork
11/2/14 5:44 p.m.

I started out with a larger rear bar, body roll is still a bit much, so the larger matched set might be good.

I don't have a WRX, but the part numbers should be the same.

16vCorey
16vCorey PowerDork
11/4/14 10:35 a.m.

Looks like they're both 22.5mm. They're both adjustable, the front being a 2 way and the rear a 3 way.

16vCorey
16vCorey PowerDork
11/4/14 2:28 p.m.

For those too lazy to click the link, here's the list:

Tokico Struts with Eibach Springs - $400

1000cc Injectors - $200

Cobb Boost Control - $50

Cold Air Intake with 83mm MegaMAF and Reman MAF Sensor - $150

Perrin 22.5mm Adjustable Sway Bars with Solid Links and Mounts - $200

Exedy Lightweight Flywheel and Clutch Kit - $300

Oversized Intercooler with BOV and Silicone Couplers - $200

Full Stainless Exhaust with Cat Delete (dented muffler) - $150

STI Carbon Fiber Side Marker Deletes - $20

Like New Powers Turbine Ball Bearing Turbo Charger - ZERO SHAFT PLAY - $500

18" x 7" Wheels with Very Nice Tires - $500

Tinted Tail Lights - $100

Upgraded Walbro Fuel Pump in Stock Housing - $75

Welded and Ported Tumbler Delete Lower Intake Manifolds (12hp gain) - $100

clutchsmoke
clutchsmoke Dork
11/4/14 6:22 p.m.

Are the horns for sale? How much? Do want.

Greg Voth
Greg Voth Dork
11/4/14 6:49 p.m.

Do you have any of the specs on the turbo? Seems like they make several variations.

Brett_Murphy
Brett_Murphy GRM+ Memberand UberDork
11/4/14 8:15 p.m.

Interested in the bars. Shipping to 27609?

16vCorey
16vCorey PowerDork
11/6/14 10:55 a.m.
clutchsmoke wrote: Are the horns for sale? How much? Do want.

Sorry, already sold the horns.

16vCorey
16vCorey PowerDork
11/6/14 10:56 a.m.
Greg Voth wrote: Do you have any of the specs on the turbo? Seems like they make several variations.

I don't, but I might be able to contact the company that made it with the serial # and get them. I haven't tried yet.

16vCorey
16vCorey PowerDork
11/6/14 10:57 a.m.
Brett_Murphy wrote: Interested in the bars. Shipping to 27609?

$25 for shipping.

Brett_Murphy
Brett_Murphy GRM+ Memberand UberDork
11/7/14 3:32 p.m.

Message sent.

16vCorey
16vCorey PowerDork
11/7/14 3:46 p.m.

Message replied!

You'll need to log in to post.

Our Preferred Partners
XO0PfDGmqDsFSPqemRlogAsX1HzD8fpbicCpAmKotmNrT6xHv5Ij8u7aKQ04v7V0