1 2 3 4 5
MaxC
MaxC Reader
3/15/22 3:51 p.m.
MaxC said:
 

Door bars - again, no bender. Decided to make the X-bar design after reading endless internet debates about NASCAR vs X-bar design.  The pro for the X bar design is that they're straight and when hit are immediately loaded in tension.  In tension the tubes are a lot stronger than being loaded in bending. By no means does that tell the whole story, but that's the rationale. I decided to add a sill bar as well, as my X-bar design is bisecting and therefore not two continuous tubes.  A way I could improve this is with gusseting, which I would like to do someday.

Cons of my door bar design are: I probably put them too high.  My reasoning was "higher will be safer", yeah but egress and ingress is a thing too.  So is having to weld the ends.  This was the hardest weld on the whole cage. 

That's all!  I'd like to improve the cage in the future by adding anti-intrusion bars, front strut tower supports, door bar gussets, and pillar bar to main hoop gussets. 

Time to revisit this from way back on page 1! Yes, ever since page 1 guilt has plagued me in that the X-bar door bar is not two tubes, but is in fact one.  Since the X is bisecting, the rules don't count it as two bars.   Gusseting the door bar seemed like low hanging fruit of cage improvements, and since the car is in pretty good shape, it's a good time to make these kinds of upgrades. 

Visited Russ again @ Racetech and he sold me some 18ga rectangles bent into a taco shapes, and advised me on how to trim them and weld them on properly.  He also sent me with some 12ga steel and some DOM to make anti-intrusion bars with (more on that at a later date).  This is what I came up with.  Again, I'm an excellent welder if I'm welding in perfect comfort in perfect conditions. In these less that perfect conditions, contorted awkwardly, this is the best I could come up with:

Gussets on the top/bottom of the X would have added more cross sectional area to the center of the X and more strength in a side impact. However, as I mentioned previously, the bars are somewhat high, and it concerned me making egress even harder.  Russ advised I do the side gussets and then support the center of the X by tying it into the sill bar.  So many triangles!!

I'm happy with them. They don't look professional, but I'm feeling better about the cage that I'm putting people in (wife is on the team now!). Next I'd like to install anti-intrusion bars, but for that I believe the dash will need to come out, so that's a project for a later date. 

B13Birk
B13Birk GRM+ Memberand HalfDork
3/17/22 9:03 p.m.

Dude! Such a sweet build. I really like seeing these 200's doing work on track!

Looks like some epic days are ahead. 

MaxC
MaxC Reader
3/18/22 12:31 p.m.
B13Birk said:

Dude! Such a sweet build. I really like seeing these 200's doing work on track!

Looks like some epic days are ahead. 

Thanks man! Indeed epic days are ahead! And if you haven't already checked it out, I have some race recap videos.  Here's the one from the last race weekend: https://youtu.be/ARhAa4nY5PU

Always appreciate feedback too! I know they're long, and I'm trying to pare down the footage, not easy with endurance racing unfortunately...

MaxC
MaxC Reader
4/11/22 2:04 p.m.

This Friday we're going to Track Night in America at PIR, which is the car's first outing this year.  My wife is the only one driving the car.  She has driven in two races, and really wants some practice in a non-race situation.  Thankfully she's 5'-2", and racing gear for tiny people is VERY easy to find on sale.  The helmet would be the only exception to that.  We found her an FIA Alpinestars suit, Stand21 shoes, and some Impact SFI gloves, all for less than $250 total. Just set up her IMSA helmet kit in her new Pyrotect helmet!

 

Also replaced the brake rotors this weekend, which have about 30 hours on them (rough estimate), the cracks are getting a bit too big for me. 

 

Also moved the seat forward another 1". That's about as close as I can comfortably sit, but it will help every other person on the team who is shorter than me.  I'm 6'-2", and this fixed mount seat needs to accommodate everyone.  There is not enough head clearance for sliders, even with the floor dropped... Wife will still need to sit on foam pads, but this will be safer. 

This track night will be the first test on track with the surge tank, new wheels, various repairs/adjustments... really hope we have no issues. I may drive it to work this week just to get some seat time. It snowed this morning, randomly, so hopefully it'll warm up so I don't freeze. 

MaxC
MaxC Reader
4/18/22 5:11 p.m.

Track night success! 

Not only did the upgrades work, almost flawlessly (we had some tire rub on the front fenders, will have to roll the crap out of them), but our driver (my wife) improved massively.  She had a pretty bad time in the race in October, and never felt like she could get in a groove and never felt fast.  This was a great learning experience where she didn't have to worry about being dive bombed in every corner by a BMW going 20 seconds/lap faster. As a result, she dropped 6.5 seconds off her time, and is confident there's a lot of room to improve from here. 

No issues with the surge tank, thank God.  Car was in good enough shape afterward, I dropped the trailer at work, and drove the race car 35 miles home. Wife talked about racing for like a solid 24 hours straight after track night, and watched an entire spec miata race at PIR (by herself) to help understand the lines. I have a feeling racing this year is going to be fun. 

https://youtu.be/qWa-_XEfBYA

 

MaxC
MaxC Reader
5/16/22 1:53 p.m.

Progress is slow but chipping away. We are registered for PIR race on June 25/26.  Had two regular teammates unable to make the race, so we had to supplement with two renters.  They are great people and have treated our car well in the past, so it should turn out just fine. 

Gotta be honest I'm getting a bit discouraged with the rising costs of everything, and maybe a bit with all the car prep by myself. I usually don't ever have trouble with motivation to go racing, so I'm pushing on knowing that I'll be the happiest dude in the world come race day. 

Bought brake pads and a new window net, which is crap for two reasons.  1) most window nets are SFI, so only last 2 years. There are some FIA nets, and they all appear to mount goofily, and I can never figure out when the net was made before purchase. Paying double for an FIA net that's sat on a shelf for two years seems counterproductive.  Thanks do discovery parts for actually checking mfg dates for me on the G-force SFI net I actually purchased! 2) Hawk has discontinued the front brake pads we've been using.  Okay so maybe it's been a long time coming.  The pads are probably 30 years old. I can buy up some new-old stock for now, but will need to find a new pad to use. ST43 seems to be the pad of choice in the endurance world, but doesn't appear to be available for this application.  Carbotech and G-Loc make pads in this application.  The Carbotech RP2 seems to have seriously mixed reviews.  ALL of the racing pads available are significantly more expensive than the blues...so hopefully whatever we switch to will last a good amount longer than blues and still work good. 

Finishing up my low fuel warning light.  Since the gas gauge is basically useless now, and there is a surge tank, we are at risk of running out of fuel with no warning.  I'm installing a float switch in the top of the fuel surge tank. As soon as the in-tank pump is unable to keep the surge tank topped off, the float will lower and blind the driver with a bright yellow LED.  Also, the big red light next to it is a low oil pressure warning light. 

 

The windshield bar is a bit too far away from the windshield, which made the mirror placement not ideal.  You had to really look up to see it, and if you're working inside the car you might just sit up right into the mirror and crack it with your head. So we raced with a cracked mirror for the car's whole life.  Finally replacing it with another cheap $14 UTV convex mirror, and modified it a bit to sit a few inches farther forward and out of the path of my head smashing into it. 

Finally, wife is making team shirts!

Next on the list is to finish the fuel light, then work on getting the live stream up and running so we can watch the race live from the drivers perspective. 

therealpinto
therealpinto GRM+ Memberand Reader
5/16/22 3:07 p.m.

We have been running ST-43´s for the last years in our Primeras. We love them, but they are not listed for our car either. Frozen Rotors custom made our sets and that has worked fine, they were not very expensive either.

So worth giving Mark at Frozen rotors a call or e-mail perhaps?

 

Our biggest hurdle is that shipping from the US is both costly and slow...

Gustaf

MaxC
MaxC Reader
5/16/22 3:38 p.m.
therealpinto said:

We have been running ST-43´s for the last years in our Primeras. We love them, but they are not listed for our car either. Frozen Rotors custom made our sets and that has worked fine, they were not very expensive either.

So worth giving Mark at Frozen rotors a call or e-mail perhaps?

 

Our biggest hurdle is that shipping from the US is both costly and slow...

Gustaf

Gustaf, 

Thanks for the suggestion.  I will look in to that.  That pad seems to have the most positive reviews of all the racing pads, and the most likely to be a success on our car.  I did not know they made them custom... that's great news! I'll reach out as soon as we blow through the rest of our Hawk Blues, likely after this next race weekend. 

Sonic
Sonic UberDork
5/16/22 9:42 p.m.

We love the ST43, as does 95% of the people that use them for endurance.  Porterfield Brakes in CA can custom make them for your application.  While they are expensive we get from 3-5 entire events out of a set and they have zero rotor wear so you avoid rotor replacement cost.  

MaxC
MaxC Reader
5/17/22 10:25 a.m.
Sonic said:

We love the ST43, as does 95% of the people that use them for endurance.  Porterfield Brakes in CA can custom make them for your application.  While they are expensive we get from 3-5 entire events out of a set and they have zero rotor wear so you avoid rotor replacement cost.  

This seems nuts to me.  Hawk blues completely destroy my rotors.  Very encouraging, glad they make them custom.  So is Porterfield the company that produces the ST43? I sometimes hear Raybestos, Porterfield, etc. Now I've heard Porterfield and Frozen Rotors produce custom ST43 pads.  Is this all the same company?

Sonic
Sonic UberDork
5/17/22 10:31 a.m.

Raybestos makes the pads for some cars.  Porterfield modifies the base stock they get from Raybestos to make custom applications that Raybestos does not make.  Porterfield also makes their own stuff, which is also good for some applications, like I use ST43 on the front and Porterfield R4e on the rear of our front drive cars to get the right balance, and the R4e are cheaper and still very good, just lower friction and don't last quite as long.  

MaxC
MaxC Reader
6/8/22 5:16 p.m.
Sonic said:

Raybestos makes the pads for some cars.  Porterfield modifies the base stock they get from Raybestos to make custom applications that Raybestos does not make.  Porterfield also makes their own stuff, which is also good for some applications, like I use ST43 on the front and Porterfield R4e on the rear of our front drive cars to get the right balance, and the R4e are cheaper and still very good, just lower friction and don't last quite as long.  

Good info! I called a number of places, and they all told me that the pads are on backorder.  What I think is actually the case is that Raybestos' compound to make the ST43 pads is on backorder. Each place told me it could be more than a month before they could make the pads. Two vendors said they had Hawk HT-10's in stock, which I forgot existed.  New old stock Blues are about $180, ST43 & other race pads seem to be around $240, and HT-10's were $185... So I figured we'd give them a shot.  I *hope* that they are better than blues in every way, longer lasting, better feel, better pad & rotor wear, hopefully no crazy noise... They are rated for higher temps, and more friction than Blues. If they don't work out then I suppose we'll order ST43's farther in advance in the future.  

Last project on the list is the live stream.  Need to order a mobile hotspot, and run power to it... I think it's not much work from there. Least excited for projects like this so I'm crossing my fingers and hoping it's easy. 

MaxC
MaxC Reader
9/17/22 10:06 p.m.

Okay I've gotta break the seal on this thread.  

We raced at the end of June at PIR Lucky dog. Lots of stuff went right and I'm not sure why it's been so hard to focus on the racecar since.  Maybe I was fried, physically and mentally after the race (another race in the mid to high 90's). I spent the rest of the summer camping, relaxing, buying & painting a new daily driver.... haven't been interested in street cars since I started racing but I needed to replace my 225k mile boring Honda, and I ended up buying a car I liked,  a 1997 200sx SE-R.  

Back to the race. This will be a brief and basic summary because I'm writing it months after the fact. We had 5 drivers this weekend, and I'm happy to say my wife is all geared up and ready to race a full weekend with us for the first time ever.  One of our renters called me a week before the race, and said the high 90's Temps are making him nervous and he wants to lend us a cool shirt tank... initially I was like no freaking way am taking on another project right now. Well the wife was all for it and we impulse bought two cool shirts on Amazon, and I wired up a switch, and bolted down some brackets to attach the cooler to.  Most of the week prior to the race, my wife and I were up late working on getting a live stream setup in the racecar so that we could view the race from the pits.... This all ended up being for nothing, because I could get our live stream to work for about 20 minutes and it would die.  I do not know what was up. Mobile hotspot and yi action cam was our setup. The race went good, but we were not as competitive as last year.  Our fastest times were about a second slower than our fastest from last year.  Simultaneously our class grew and got faster.  We were close to the pace of the top cars with our fastest drivers. If we could keep that pace up all day we may have been in contention. But we had half our team not quite setting the fastest times.  I will report that we had a lot of improvement with our team. My wife set a best time of 3 seconds faster than her track night test. Another driver broke into the 1:39's for the first time. We're making progress but it just wasn't quite our weekend. I set my cheap tach redline pointer at about 5000 RPM because the car seemed to be getting hot all weekend.  It took keeping the revs low, and not using 2nd gear again to keep the temps under control.  Thankfully the car has good torque, so I don't think it killed our pace that bad, but it certainly didn't help.  We used no 2nd gear, and started using 5th. It was still a challenge to keep the car under 220F.  After the race on Saturday I found a cut axle boot with grease leaked everywhere. Real nice, I was so beat. Bought a generic boot locally, totally didn't fit.  An RX8 team nearby said, wow, that looks strangely like an RX8 boot.  So... the car wore an RX8 axle boot for the race on Sunday, which worked flawlessly. Sunday was a good race but we were still out of contention.  They shortened the maximum stint length to 1 hour, thankfully, it was too dang hot.  The coolshirt was a lifesaver when it worked (worked for me sunday and not saturday).  We had a fueling penalty for spilling a few too many drops.  Saturday we ended up 13th overall and 5th in C class, Sunday we finished 10th overall and 4th in C class (43 cars started the weekend).... So hey now that I think about it, we didn't do so bad.  I do remember on Sunday that the race was feeling a bit hopeless after our penalty, and we're all frying in the sun... And I just kept telling the team, hey we really need to keep turning laps, anything can happen.  Well there was a late retirement right in front of us that promoted us to 4th in class.  It was a positive ending for sure. We've got some things to work on and hopefully we'll climb up the order and fight for podiums at our next race in October! One really great takeaway was that the team was just in great spirits. The renters were happy, the car was SOLID other than the temps... Wife learned a ton and got a lot of experience. Seriously it was a great race weekend.


Hahaahaa I said that was going to be brief. I'm hopeless. 

On the list of things to improve, fix or ditch live stream, bigger radiator, rebuild axles, try to get our body roll under control. I've addressed most of the stuff on this list, added an Ebay aluminum S13 radiator, welded on custom front coilovers with 6kg/mm springs & reinstalled stock rear sway bar, rebuilt all axle joints, and I think we'll just hard wire a camera so we get fottage but no live stream. 

Anyway this was an unplanned and impulse post just so I don't ignore this thread anymore. More to come. We race October 29 & 30. 

MaxC
MaxC Reader
9/17/22 10:34 p.m.

MaxC
MaxC Reader
9/17/22 10:35 p.m.

wvumtnbkr
wvumtnbkr GRM+ Memberand PowerDork
9/17/22 10:51 p.m.

I love this car and build.  Congrats on the top 10!

MaxC
MaxC Reader
9/19/22 10:06 a.m.
wvumtnbkr said:

I love this car and build.  Congrats on the top 10!

Hey thanks man! I'm a fan of your car too.  And "top 10" sounds pretty good when you put it like that. 

We're going to shoot for better next month.  We need more metal dog trophies!

therealpinto
therealpinto GRM+ Memberand Reader
9/20/22 12:12 p.m.

Nice to hear!

After the last (latest?) motor swap on the P11 I once again said, the next car should be rwd. Or maybe it is just a matter of making the P11 a "race car", remove unnecessary stuff in the engine bay, simplify connectors and hoses - and learn what to remove :-)

As long as our class rules are as they are though, there are really no rwd options keeping a Nissan or SR20. So I will just keep dreaming of your options :-)

Gustaf

MaxC
MaxC Reader
9/21/22 4:30 p.m.
therealpinto said:

Nice to hear!

After the last (latest?) motor swap on the P11 I once again said, the next car should be rwd. Or maybe it is just a matter of making the P11 a "race car", remove unnecessary stuff in the engine bay, simplify connectors and hoses - and learn what to remove :-)

As long as our class rules are as they are though, there are really no rwd options keeping a Nissan or SR20. So I will just keep dreaming of your options :-)

Gustaf

Gustaf, Congrats on the 4th place! Was good to hear your last race was successful and no major failures. 

I will say that the grass always does seem greener, at least for me.  When you're in the thick of it with one car, a new chassis does seem better in every way. That is kind of where I ended up when building the P10 originally, and prompted my switch to RWD. Now that I'm a few years into racing it, and have two B14 SR20 street cars, I'm always thinking about how great they would be for my next race car. Sometimes I wish I had a 4 cylinder so that it would be lighter, burn less fuel/brakes/tires, be easier to work on, and cost me less. Have even thought about replacing the v6 with a KA24... But probably won't do that. I think the series is fast enough that we need the V6 power to be competitive. My opinion is that you'll find a whole new list of problems with the next chassis you move too.

But I do know what you mean... I think that FWD SR20's are way tighter in the engine bay than they should be, and sometimes things are not so easy to work on. It would be great to delete everything that's not necessary in the engine bay. Are you guys done with the P10? Seems like it's a lighter option if you guys still need more speed. 

therealpinto
therealpinto GRM+ Memberand Reader
9/22/22 12:59 a.m.

The P10 is still in storage but I think it "needs" a class where more things can be changed to really shine. It would need bigger brakes (we can't swap those) and it would need better springs and dampers for the "real" track. Plus the body really would need a lot of work.

We'll see, ideally I would have sort of hoped that a new team would take it on as a kind of foster child ;-)

Gustaf

MaxC
MaxC Reader
9/22/22 12:15 p.m.
therealpinto said:

The P10 is still in storage but I think it "needs" a class where more things can be changed to really shine. It would need bigger brakes (we can't swap those) and it would need better springs and dampers for the "real" track. Plus the body really would need a lot of work.

We'll see, ideally I would have sort of hoped that a new team would take it on as a kind of foster child ;-)

Gustaf

Gotcha. I guess I don't know the fine details of the rule set you're dealing with.  From what I remember the P10 didn't tons of options for suspension modifications anyway. What can you modify to get more speed out of the P11? You can always move to the US and race LDRL laugh

MaxC
MaxC Reader
10/27/22 6:28 p.m.

Quick update: We race in 2 days! Going back to Portland for a 7 & an 8 hour enduro. Weather is looking cloudy with some rain... I'm very excited to race in the rain again, but nervous being the car owner. My wife is also racing, who has experience racing a FWD protege in the rain, but no RWD. In fact none of us have any experience racing this car in the rain, so it should be interesting.  We have torque, a welded diff, RWD, 15 hour (2 heat cycle) RS4's, and I just increased the front spring rates and added back on the rear sway bar.... The body roll was too much before and I wanted to address it, but going into a rainy weekend probably wasn't great timing. Other upgrades include more wheel spacers & rolled fenders to get our dang tires to stop rubbing, bigger radiator to hopefully keep us below 220F, and maybe just maybe I will get live streaming working on a borrowed Yi action camera!

Sad news is that LDRL put out a survey and PIR October has been voted very low on the priority list for teams, due to questionable weather and PIR already having a summer date.  Very sad, this will be the last year they hold a halloween race at PIR... It was a good 12 year run, starting with the race that got me hooked on this kind of racing with Chumpcar in 2009. Despite it ranking low on the survey, there will be 47 cars there this weekend!

I'll report back soon!

Honsch
Honsch Reader
10/28/22 12:55 a.m.

Please be very careful at Portland in the wet.

The back "straight" becomes a river if there's steady rain.  The paving is slippery everywhere in the wet.
You're going to have some fun times with a welded diff and torque if it's raining.

On a positive note, you shouldn't have any problems keeping the drivetrain cool.
What you will have problems with is keeping the windshield defrosted.  Prepare a solution if you haven't already.

EDIT:
Checking the forecast, it looks like it'll be wet on Friday and some showers Saturday morning.
You might just dodge the downpour.  Good luck!

MaxC
MaxC Reader
11/2/22 1:54 p.m.
Honsch said:

Please be very careful at Portland in the wet.

The back "straight" becomes a river if there's steady rain.  The paving is slippery everywhere in the wet.
You're going to have some fun times with a welded diff and torque if it's raining.

On a positive note, you shouldn't have any problems keeping the drivetrain cool.
What you will have problems with is keeping the windshield defrosted.  Prepare a solution if you haven't already.

EDIT:
Checking the forecast, it looks like it'll be wet on Friday and some showers Saturday morning.
You might just dodge the downpour.  Good luck!

Thanks for the advice! It was very slick indeed.  Someone oiled down the track on Saturday in practice and it really was just super slick all weekend rain or dry. I had the back end 180 on me very suddenly braking in to turn 7, and that was the only time I lost it. We had a couple of spins, but thankfully no contact and no offs. I watched people struggle with fogging windshields and have been in the rain enough at PIR that I decided to leave in the stock heater core and blower motor... We didn't have any issues with fogging, and the driver was the only one that was warm all weekend. 

Extremely epic race report coming soon. Best weekend of racing of my life...  STAY TUNED!

MaxC
MaxC Reader
11/4/22 5:38 p.m.

As promised here is the epic update of the century.

 

What a truly epic weekend!! It’s very hard to put words to describe just how good of a weekend this was, but I’m sure I will manage to come up with way too many words anyway, fair warning. This was the best weekend of racing of my life. We truly experienced the extreme lows (okay no one crashed or got hurt, so not THAT low), and the highest high we could have imagined. It feels like your underdog team has a comeback to win the Superbowl, only it’s YOU! I’m so grateful for my team who came and threw down their hard-earned money to race with us, worked their butts off all weekend even when things were bleak, their enthusiasm, and of course for their performance. Thank you, team! We’re grateful to Cathy and Lucky Dog who has given us racing at PIR for 13 years, and putting their heart and soul into building this organization. Thanks Erik, Chris, all the Lucky Dog team, and all the teams out there that we met &/or got to know better this weekend. Pontiaxed, Durkee Walker, 3D, Miata Vice, BDR, General Leif, and I’m sure there’s more that I’m forgetting. Thanks to Leo of Apex of Failure for being willing to help our team through our repairs, live stream support, parts runs, everything, dude… thanks.

If you’ve read all that and want to hear an epic story… here you go (Warning LONG).

We started the weekend very confident that we had a good team and a good car, despite forgetting a laundry list of stuff, I thought we had a shot at the podium. Our driver lineup was Dave, Blake, my wife Megan, and myself. Matt, Sarah, Jarrett and Leo rounded out the team.

7 Hour Enduro

We started Blake in the car on Saturday, and about 1.5 hours in to the first stint our hopes of a podium went up in a giant spectacular white cloud of smoke. Blake thankfully put the car in 5th gear and putted into the pits, engine stalled and he rolled the rest of the way… would not restart. He reported coolant temps of 175 all morning and then instantly shot up to 230 and… Poof!

Brought the car behind the wall and began to troubleshoot. No/low coolant, so I pressurized the cooling system and started cracking spark plugs loose. Coolant pressure held until I got to cylinder #6… PPPPSSSSSSSSSHHHH!!!!! Steam coming out of cylinder 6. We found the failure, blown head gasket! I thought about it for about 5 seconds and decided there is a decent chance it’s ONLY a headgasket and not major engine damage, therefore we MUST replace it. We may not be running before the checker, but we have a good shot at taking the green flag the next day. Leo very awesomely volunteered to run parts, after we realized we had no vehicle left on the outside of the track. He had us headgaskets, 10 qts of oil, filter, water pump, and various nick-nacks by 3pm. We exploded the whole engine through our pit stall but were able to get it all back together right before dark.

The motor fired on it’s first crank but was running on 5 cylinders. Took a couple more hours of diag, stressing out, stupefied blank stares, and a parts run. I believe there was a plug wire that pulled out of its insulator and wasn’t making a good connection. We fixed that and replaced the plugs and fired it up… sounds good. Drives good around the parking lot. I requested the coldest of beers from my team, high fives all around, bedtime.

8-hour Enduro

Sunday morning, we have our act together. Flush the oil for a second time, and wow, it’s a milkshake… Really just hoping there was no bearing damage due to the coolant at this point. What else can you do? How much abuse can a 140,000-mile junkyard minivan engine take? Fresh oil and we take the car to grid.

Dave starts the race for us. On the pace lap he reports a misfire. That really takes the wind out of my sails. I ask him if he can drive it and he says he’ll try. Well, we don’t hear from him that much so I decide not to push the issue… I don’t want to bring in a car to try and fix something that will certainly kill our race if he’s still able to drive it kinda-fast. Leo looks at me and says “this is why you need a RaceCapture live telemetry system”. Megan leaves to go put our raffle tickets in for the drawings, and dumps all but a couple into the RaceCapture box. Dave’s stint goes decent except he locked up the brakes near the safety truck when the car in front stopped suddenly… We get a penalty for extreme asshattery and are given a sticker on our car depicting a sad face with a butt on top. The shame…. Dave apologizes and we only lose a few minutes in the doghouse. I find the NW Safety crew and give more apologies. We’re way down the order, and I’m just assuming at this point that with the engine down on power and the penalty… this will just be a long track day and give the team some laps for all their trouble the day before. At this point I stopped checking where we were in the order… 12th or 13th in C-Class, don’t remember… this is a long shot. But it’s a long race, and anything can happen, and I always like to keep that in the back of my mind. Regardless we need to keep the car out there and turning laps, and give ourselves the best chance we can.

Next, we send Megan out. This is the quintessential nervous mother driver, and the only time of the day where it really starts to rain. What better way to learn how to drive a RWD car with a locked differential??? Megan does great and was able to beat her best time from the summer despite having very few laps when the track was drying. If nothing else she learned a lot about how to control a sliding car, got more confidence, and made her first full 2-hour stint. I wander down to the timing tower to check the raffle results. We won the dang RaceCapture. I radio and tell Megan while she’s driving. Icing on the cake!

I’m next up and man did it just consistently drizzle for my entire stint. Hard to find grip. Seemed like there was no grip in turns 1 & 2, 7, and 11… but places like 4 and 5 were as fast as when dry?? Crazy! Hard to learn. I’m now understanding what the misfire is like. The engine actually has power, but every few rotations it’s clearly dropping a cylinder. Keeping the revs low seems to reduce the misfiring, but it is still challenging, and the whole car is vibrating. Can’t even pull most miata’s on the straights. But it is race-able. I finally get my lap times down into the 1:38’s and I was cool with that given the conditions. Blake radios to me that I’ve just inherited 4th place in C-Class and this is the first moment since the morning when I actually considered where we stand. I could hardly believe it! Dave gets on the radio and informs me that the fuel light staying on for the entire front straight is an indicator that we’re nearly out of fuel, and we must pit that lap. He did this in the morning, and it stumbled as he was entering pit lane… This fuel float is in the 2-liter surge tank, so that means we’re seriously low. When the light stayed on solid, I come into pit. Unfortunately, my stint was part-dry, and no cautions, so I only made it 1:27 on fuel. We’re now realizing that 5 stints could BARELY work, and we may run out of fuel at the end. I pit in 4th.

Next up is Blake. He rejoins in 4th ish, give or take. Blake does a good job, and the track starts to dry out during his stint and would remain dry for the rest of the race. He inherits 2nd or 3rd place (don’t remember exactly) while the top 3 Miatas all pit for fuel right on time at 3pm, 2 hours to go. We start to see how the race is going to shake out. We’ll pit again for fuel and to put Dave in the car and drop back to 3rd. Blake just needs to go as long as he can to give Dave the shortest stint possible. Of course, this couldn’t be closer, so Blake only makes it about an hour 20 on fuel before reporting the fuel light on solid. I call him in and our fueler Matt says he’s going to slow the fuel down and make sure it’s filled all the way up the filler neck… This is going to be so close.

Dave starts our final stint and has an hour and 31 minutes to the finish. Nobody has been able to do this in dry conditions. The writing appears to be on the wall for how this is going to go. He rejoins in 3rd, 1.5 laps ahead of 4th place (3D racing). 1st (Durkee Walker) and 2nd (Pist’n Broke) place are a few laps ahead of him in their own fight. All 3 miatas plan to go for 2 hour stints, and not stop the rest of the race. I had a talk with Dave before he got in the car and told him he really has to conserve fuel or we’re not going to finish. As hard as it is to not go fast, please do not go fast. He does a few laps, gets his bearings and gets up to speed, and with his 1.5 lap buffer back to the 4th place 3D Miata, I get on the radio and tell him “Alright you’ve had some fun, we need to slow the pace and make sure we finish”. Dave, being a racing driver, does not want to go slow. There was a great deal of back and forth over the radio as he mostly-complies and slows the pace by about 4 seconds per lap. He keeps this up for a lot of his stint, but defiantly sets the fastest lap of the weekend to prove a point, protect his pride, so he can smack talk Blake later, whatever. I fire Dave from the team temporarily. What Dave doesn’t know is that 3D racing is taking about 5 seconds a lap out of his lead. What I don’t know is if the fuel light is flickering and you know what, some things are better left unsaid between the crew chief and the driver. My plan is to let them get a lot closer and then release Dave to drive as fast as he can. I trust Dave can match 3D’s pace and keep him behind when it becomes necessary. We must save fuel, we must finish, we must stay ahead of 3D racing and keep our spot on the podium… this is a juggling act that we really don’t know if we’ll be able to pull off. I’m sitting at the computer watching the times, holding the radio, watching the cars pass by and checking the gap, losing years off the end of my life for the last hour and a half of the race. Unexpectedly, Durkee Walker must have burned too much fuel trying to stay in 1st place, gives up the lead to Pist’n Broke, and starts moving slowly. They pit for fuel, a couple laps ahead of us. By this time the gap between 3D racing and Dave has shrunk to a mere 19 seconds. Everyone in the pits is yelling at me to release Dave to put the hammer down. I refuse. Wait one more lap… 16 second gap. “Dave, the moment you’ve been waiting for, it’s time to push. We’re either going to get on the podium or we’re going to get towed in.” “Copy That!” I can hear the smug grin on his face through the radio. Dave puts the hammer down dropping his lap times 4 seconds, and it appears that 3D racing gets the memo and responds, still running 1.5-2 seconds a lap faster than Dave. Just to make things more nerve-racking, Durkee Walker rejoins right between Dave and 3D, and a battle ensues about 8 seconds behind us. We begin to suspect that the 1st and 4th place miatas may not make it to the end on fuel either, so we plan an emergency pit stop if Dave sputters before 5 minutes to go. 5 minutes left comes and goes, and we’re sure Dave will put us on the podium or come in on the hook. Suddenly 3D racing slows and has run out of fuel trying to run Dave down. Doesn’t help us in the moment but solidifies our spot on the podium if Dave runs out too. Durkee Walker is charging hard with a fresh fuel stop. They keep taking chunks out of our lead. Race control gives the signal for the 2-minute warning, and we all rush to the wall to cheer on our teams. Dave comes around for our final lap with Durkee Walker just feet behind. We can see his helmet glowing, which turns out to be the fuel light on solid. That is the fuel light we have had an unspoken rule of not discussing. He radios “He’s dive bombing!!” and sure enough he tries to dive on the inside of turn 1 but is unsuccessful. Checkered Flag comes out. So here we are not knowing if Dave will be able to hold off Durkee Walker for the rest of the last lap, with no fuel, with a misfiring engine, with a fresh track side head gasket and maybe milkshake oil in our junkyard engine. I have a heart attack from stress while waiting. Then they come around turn 12 and we see our Nissan ahead of Durkee Walker but just barely and start to realize there isn’t enough room for him to run us down. Our whole team and maybe some other teams were yelling so loud and jumping up and down like a bunch of idiots. Dave crosses the line in 2nd place .098 ahead of Durkee Walker in 3rd! This is the margin at the checkered flag after 8 hour of racing:

We’re hugging and high fiving each other and Dave says on the radio “It’s stuck in 4th gear, I can’t shift” I reply “whatever Dave you can crash it for all I care”. After the race I pumped 0.4 gallons of fuel out of the car, and discovered a tire that had been rubbing that was cut down to the cords.

While not 1st place this was the hardest fought victory I’ve ever had, and I can probably say the same for the team. It almost feels better that we had such bad luck the day before because I don’t know if it would feel this good without it. Thankfully Lucky Dog saw it the same way and awarded us with the Ebay Motors Underdog Award and I got a giant check for $500.

On top of that we brought home a metal dog trophy, $100 Pyrotect gift card, 1 Hankook RS4, $150 in Hawk brakes, and of course our RaceCapture. This was the best race weekend of my life and I don’t think I’ll ever forget it.

1 2 3 4 5

You'll need to log in to post.

Our Preferred Partners
5k8Wn8h0rPYQr5kpIYOdGQcUiwglK25QJUHFE3UCnSlzEqdllFwZeSGZ6kvbA9gM