1 ... 8 9 10 11 12 ... 14
a_florida_man
a_florida_man GRM+ Memberand Reader
9/19/18 5:50 p.m.

In reply to stafford1500 :

I'll bring them out for as much as they can take.

Hopefully Jack being 9 will be able to hang, Tommy being 6, will likely have a shorter attention span. 

Pete Gossett
Pete Gossett GRM+ Memberand MegaDork
9/19/18 6:44 p.m.

In reply to a_florida_man :

Need any of my leftover Vette parts, since I’m heading that way?

a_florida_man
a_florida_man GRM+ Memberand Reader
9/19/18 7:36 p.m.

In reply to Pete Gossett :

Possibly... whatcha got?

 

Pete Gossett
Pete Gossett GRM+ Memberand MegaDork
9/20/18 5:57 a.m.

In reply to a_florida_man :

A/C bypass pulley, poly front control arm bushings & balljoint boots, and interior plastics - center console, center display/controls surround, HVAC controls(I think), rear hatch trim. I’m probably forgetting some stuff. 

Here’s the link, the wheels are gone but I have everything else. 

a_florida_man
a_florida_man GRM+ Memberand Reader
9/20/18 8:05 p.m.

In reply to Pete Gossett :

Wow, very generous, but it looks like Im good with the stuff that's on your list.

Thanks!!

a_florida_man
a_florida_man GRM+ Memberand Reader
10/14/18 2:16 p.m.

In reply to a_florida_man :

Sorry you couldn't make it... you were missed! 

Lock in next year!

Pete Gossett
Pete Gossett GRM+ Memberand MegaDork
10/14/18 3:33 p.m.

In reply to a_florida_man :

Thanks for giving us a tour of your shop! I wish I’d though to take a group pic while we were all there. 

a_florida_man
a_florida_man GRM+ Memberand Reader
10/14/18 5:03 p.m.
Pete Gossett said:

In reply to a_florida_man :

Thanks for giving us a tour of your shop! I wish I’d though to take a group pic while we were all there. 

Agreed, that would have been a keeper! It was a spectacular 3 days.

Brett_Murphy
Brett_Murphy GRM+ Memberand UltimaDork
10/14/18 10:39 p.m.

In the process of Craigslist trawling and reading these forums, I see C4 Vettes are cheap. Now I may have to read everything I can about the LT1 engine.

Pete Gossett
Pete Gossett GRM+ Memberand MegaDork
10/15/18 5:38 a.m.

In reply to Brett_Murphy :

One word: Optispark

mazdeuce - Seth
mazdeuce - Seth Mod Squad
10/15/18 6:22 a.m.

So. Many. Ideas.........

This car could be stunning. I'm excited.

a_florida_man
a_florida_man GRM+ Memberand Reader
10/15/18 7:48 p.m.

In reply to mazdeuce - Seth :

Thanks to you, Pete and Steve for the thoughts, concepts, and above all, encouragement.

I need to get the build back on track, life allowing, and at least get the engine fired and broken in.

Being able to occasionally make eye burning exhaust will be a great motivator.

a_florida_man
a_florida_man GRM+ Memberand Reader
10/15/18 7:51 p.m.
a_florida_man said:

In reply to a_florida_man :

Sorry you couldn't make it... you were missed! 

Lock in next year!

Funny, this was meant for Dusterbd13.

a_florida_man
a_florida_man GRM+ Memberand Reader
12/4/18 11:36 p.m.

Well guys, time to get this going again...

For those that don't know, my dad passed in November.

He was a car guy.

He owned 4 Austin Healey's, a series 1 XKE (pictured), a 66 Corvette, a Pontiac 2+2, 69 Cutlass, etc.

 

He is the reason I'm a car guy.

We got his 4th AH in 2006.

I did lots of rehab and conservation on that car over the years to keep it on the road for him as a driver. 

It's mine now.

Some people have asked me what it is worth.

I tell them 'nothing'....

.....we will never sell it.

Now, back to the project at hand.... :)

a_florida_man
a_florida_man GRM+ Memberand Reader
12/5/18 11:49 a.m.
a_florida_man
a_florida_man GRM+ Memberand Reader
12/26/18 10:50 p.m.

Well, even though the last post was a bit facetious, the SLK has primed the pump for the Corvette work, I'm hoping to get it out and finish off the MPI setup and fire it up with a stock tune just to see what happens.

Wish me luck. 

Any one have a spare steel building for cheap, LOL? It's getting crowded around here.

I last counted 9 private motor vehicles and one patrol car.

It always looks like a party around here...

wheelsmithy
wheelsmithy GRM+ Memberand SuperDork
12/27/18 5:57 a.m.

Godspeed to your Dad. Very cool Healey.

a_florida_man
a_florida_man GRM+ Memberand Reader
12/27/18 12:12 p.m.
wheelsmithy said:

Godspeed to your Dad. Very cool Healey.

Thanks wheelsmithy. This is a strange time and the cars and car folks sure help.

a_florida_man
a_florida_man GRM+ Memberand Reader
12/31/18 11:10 a.m.

Ok, so there has been a small amount of progress since the challenge....

I'll probably pick this back up after the 1998 SLK230 Gastropod is farther along.

:)

a_florida_man
a_florida_man GRM+ Memberand Reader
10/17/19 10:31 p.m.

Bumping this post because it won’t let me set it to a watch status. Hoping that this post will refresh some attribute.

2020 GRM 2k Challenge for this one by the way.

a_florida_man
a_florida_man GRM+ Memberand HalfDork
9/16/20 9:00 p.m.

Still have it, still plan to bring it out..... in 2021.

:)

Sticking with this one for sure....

ClemSparks
ClemSparks UltimaDork
9/16/20 9:19 p.m.

I need to scan the thread again to remind myself what all you've done but glad to see it back on the "active project" list at your place ;)

a_florida_man
a_florida_man GRM+ Memberand HalfDork
9/16/20 9:26 p.m.
ClemSparks said:

I need to scan the thread again to remind myself what all you've done but glad to see it back on the "active project" list at your place ;)

Thanks, honestly I need to re-read it as well.....

This started as a concept at the 2017 Challenge and,

was delayed for the 2018 challenge,

waylaid for the 2019 Challenge,

and mislayed for the 2020 challenge.

 

see what I did there... :)

ClemSparks
ClemSparks UltimaDork
9/16/20 9:42 p.m.

Belay that remark!  ;)

a_florida_man
a_florida_man GRM+ Memberand HalfDork
9/17/20 5:30 p.m.

Well... since the Healey is not an option for an exhibition car (which is VERY understandable and appropriate) and the U42T is not very entertaining.... time to consider what was thought to be impossible....

 

You know, as I unearth it. I see I had done a LOT in 2017-18. Gonna have to refresh my mind on the budget status and give this some serious thought this weekend. Perfection is the enemy of progress right?

I'm an intake carb and distributor from making the thing run to break in the cam. I should do that right?

1 ... 8 9 10 11 12 ... 14

You'll need to log in to post.

Our Preferred Partners
eO7Nn35OzHNrzWy2HpEwTG7VJLfEgncRBoZnKfciFNkNP9H35vwlePX9w0ffqEzS