Getting pretty close! Ordered another Canbus cord and the Haltech gps speed sensor. I've made contact with the local Haltech/dyno guy!
Getting pretty close! Ordered another Canbus cord and the Haltech gps speed sensor. I've made contact with the local Haltech/dyno guy!
I connected the hot wires and no smoke got out! So I'm feeling pretty good about that! And bolted the wheels on!
I've got a date with the tuner this Sunday to get this thing running!
In reply to Lof8 - Andy :
I'm excited to hear how it goes. I assume they will be setting up the base map and then doing the tuning in one session? Remote or on site?
In reply to captainawesome :
It's going to be 2 separate steps. 1) base tune/get it running. This will allow me to drive it a bit and iron out any mechanical kinks. He's going to come to my shop in person to do this. 2) we'll schedule a dyno session at his shop, which is only a few miles away from me, to optimize the tune.
Installed the GPS speed sensor. Ran the fuel pump for a bit - fuel system seems solid with no leaks. Set the fuel pressure on the manual regulator to 50 psi. Waiting on a canbus connector to connect to the wiring harness. That's the last piece and it delivers tomorrow. I think everything's ready. 🤞
You'll need to log in to post.
