Everything you need to swap from an automatic to a manual: 7th Gen Honda Accord / 3rd gen Acura TL

Ok maybe not EVERYTHING, but pretty darn close.  Following is a list of what I have for sale:

2006 Honda Accord 6 speed manual.  126k miles on the transmission.  It shifts flawlessly with no grinds or pop outs.  Only negative is that one of the oil pan bolt holes has the remains of a snapped tap inside it.  It does not affect functionality at all.  

I also have the transmission hardware.  
 

OEM Manual transmission starter: no issues

OEM clutch slave cylinder and hydraulic line: no issues

OEM clutch master cylinder with reservoir - no issues

shifter box and shifter cables - no issues except for some surface rust on the shifter

Full ignition with 2 keys (not pictured) along with immobilizer and wiring harness master connection (not sure what the technical term is)

Clutch pedal assembly and brake pedal assembly - surface rust on both

full manual transmission wiring harness - compatible with both j30a4, j30a5 and j32a3

Manual transmission coolant crossover pipe

Manual transmission intake manifold with butterflies and butterfly control module

before parting this all out, I'd love to get rid of all this stuff as a unit.  For comparison:  here's some rough estimates of what all this would cost separately:

transmission:  $500

starter: $60

slave cylinder and line:  $40

master cylinder and reservoir: $40

shifter box and cables: $80

Immobilizer with master harness, keys and ignition: $120

Clutch pedal assembly:  $40 

brake pedal assembly:  $30

full manual trans wiring harness:  $100

coolant crossover pipe:  $30

intake manifold with butterflies and butterfly control module:  $40

Those are pretty low/reasonable price estimates, based off car-part.com and eBay.  Total for all comes to $1080.  
 

I'd be willing to part with all this for $850.  Also, I have a truck, I'm on the road a lot, and I can deliver if you live close enough. I live in Columbia SC and I work a lot out of greenville, NC.  Charlotte, Raleigh, Florence, charleston, Augusta - those are all fairly easy for me to hit.  Otherwise UPS is doable.  

Edit:  everything is now for sale separately.  Haven't had much interest in this stuff as a unit.  Prices are same as what I listed above.

I know it's not listed but do you have an engine oil pan you'd sell?

In reply to solfly :

Sure do.  As well as oil pickup and oil pickup housing 

Update:  Transmission and starter are sold

everything else is still for sale.  I'm dropping the price on everything because I'd just like to get it out of my workshop.
 

slave cylinder and line:  $30

master cylinder with reservoir: $30

shifter box and cables:  $60

clutch pedal assembly: $30

engine harness: $80

ignition with keys, master harness and immobilizer: $100

coolant crossover pipe:  $20

intake manifold: $30

Also I have: 

oil pan, oil pickup, dipstick: $40 for all

Last edit:  if you want anything listed above, just shoot me a price you want to pay and I will probably say yes.  If there are PM's on GRM I haven't discovered them yet so just reply to this thread, or enlighten me on how PM's might work on here

Is that the J30 intake with the J32 top plate or a complete J32 intake?

In reply to CanyonCarver750 :

Complete j32 intake.  Which is the same as the j30 it just says Acura instead of Honda on the top plate.  

Is this stuff still available?

Did you still have the clutch and brake pedal assembly? 

In reply to Marco Ramirez :

I think I still do.  I had forgotten about this thread.  Is there a PM function on here?  I can't seem to find it.  

In reply to shmaya241 :

Lot of stuff is.  Transmission is sold but let me know what you need.  

Do you still have the coolant crossover pipe?

Yep I do.  

In reply to Number1Gaza :

How much for both pieces, the housing and pipe

In reply to Number1Gaza :

Here's my number, it would be easier to text:

636-459-8567 

Update:  Trentin21 bought essentially all the other parts I have.  Only things I have left for sale are a J series oil pan and Accord front hubs with Acura Legend dual piston calipers.  I still have a bunch of random things laying around (mounts, bearings, vtech housing, etc)... if you want something just ask!

Number1Gaza said:

Accord front hubs with Acura Legend dual piston calipers

Still have these?