Challenge flea market

If anyone wants a set of Mini star rims with almost new but very old Hoosier on them they can be had cheep. Pick up on I20 in SC...

ISO: Plate or square aluminum, preferably 3/16 or thicker.

I need a carbed intake for SBC vortec heads. Going into a K30 so nothing high rpm.

singleslammer wrote: In reply to David S. Wallens: I think I will take you up on those generic coilovers.

Roger that. I'll pack them.

NordicSaab wrote:

If anyone wants a stock 75 280z sway bar for $5 it'll help my budget, i still have $14.90 in recoup room

Hallow or solid? length? OD?

18mm, not sure if hollow or solid but it's pretty light.

A link to my for sale thread that I could bring to the event.

I have some stock e36 m3 sway bars I've been trying to unload. Please text me at 941-266-710zero if interested. I'll bring them and trade you for a cheeseburger from the snack bar.

I will have many nice interior pieces from a 1997 Firebird Trans Am, like an un-cracked dash, perfect grey leather. seats etc...

I also have a Mega Squirt ECU and a turbonetics turbo, (need to check the size when I get home). I can bring if anyone is interested.

I have a set of white 4x100 15x6.5 Rota wheels with 205/50/15 street tires for $140.00 if anyone is interested. They are fairly light 12 lbs each IIRC. As far as wheels go I also have a set of 15x10 5x100 Centerlines and with the thin fronts to match.

Also.anybody need a set of rust free 240z front fenders left over from my IT race car?

pimpm3 wrote: I will have many nice interior pieces from a 1997 Firebird Trans Am, like an un-cracked dash, perfect grey leather. seats etc... I also have a Mega Squirt ECU and a turbonetics turbo, (need to check the size when I get home). I can bring if anyone is interested. I have a set of white 4x100 15x6.5 Rota wheels with 205/50/15 street tires for $140.00 if anyone is interested. They are fairly light 12 lbs each IIRC. As far as wheels go I also have a set of 15x10 5x100 Centerlines and with the thin fronts to match.

Very interested in the 4x100 wheels

Can you post a pic?

In reply to pimpm3:

Shoot me some pics of the rotas also please.

Also...any Porsche Boxer or late 944 owners looking for a set of 17" twist wheels? 7 1/2 front and 9" rear I think. Complete with center caps

Ovid_and_Flem wrote: Also...any Porsche Boxer or late 944 owners looking for a set of 17" twist wheels? 7 1/2 front and 9" rear I think. Complete with center caps

Rears are like Hen's teeth in the Porsche Club Spec Boxster community!

Pimpme3 any information on the megasquirt?

Ovid_and_Flem wrote: Also...any Porsche Boxer or late 944 owners looking for a set of 17" twist wheels? 7 1/2 front and 9" rear I think. Complete with center caps

I'm on the hunt for a couple sets of challenge friendly porsche wheels for my $2017 or 18 car. Realistically it's '18.

They should clean up well, they are dirty from sitting under a tarp. If you don't dig the white and red they could be painted what ever color you choose.

Tires are usable, unsure how old. I think two are bfgs and two are falken. All are 205/50r15's

David S. Wallens wrote: Anyone need a no-name/eBay/generic coil-over kit? I have four of these and will bring them to the Challenge. Price? I'd rather not bring them home.

Any idea what the spring rate is on them?

I've got some nissan SR20 turbo parts that I can bring. Look here for pics

I've also got a 240sx front drive shaft with flex joint,

240sx KA24de power steering pump.

80amp 1991 Infiniti G20 Duralast Alternator (never installed)

and a 12" universal radiator fan.

Remember, anything you buy will help my budget!

Dusterbd13 wrote: Pimpme3 any information on the megasquirt?

in for moar

In reply to Ovid_and_Flem:

Interested in 240 z fenders Karl

Stuff I could bring to Gainesville. Let me know if you want me to bring anything in particular. Can e-mail photos. Engine tools, make offer:

Valve spring compressor

Cylinder ridge reamer

Piston groove cutter/cleaner

Cylinder hone

Piston ring compressor

Air Compressor, 110V AC, Wards, wheel-mounted, very old but runs. $40

Gas powered Sears leaf blower, not used for at least 3 years. $10

1/2" Impact Wrench, Battery powered, works but needs charge right before each job. $10

Lug Nuts, misc., mostly OEM new car take-offs from the mid 1980s. $0.25 each. Lots of GM, some big chrome Nissan Z, etc.

Door Glass, first gen Rabbit 2-door passenger side I think, FREE

Muffler, Dansk for Boxster S. $40

Misc. small parts for 944. Inquire.

Good OEM rear spoiler for 944. $20

Bicycle: Ladies 24 inch Roadmaster "Mt. Fury" 15 speed mountain bike, metallic blue, like new, stored inside probably 5 years but ridden less than a mile. $40

Sprite/Midget parts MAKE OFFER: 1 1/4 SU carbs, OEM air filters 1967 1/2 Sprite, nice Front Bumper for Bugeye, Rear bumper 1967 1/2 Sprite missing one overrider, Sprite/Midget doors with roll-up windows, Convertible top bows for 1967 1/2 Sprite, Misc. Sprite/Midget small parts, emblems, etc., Steering wheel for 1966 Sprite, Steering rack for 1967 1/2 Sprite, Steering wheel with column for 1967 1/2 Sprite, Wire wheel hubs/axles, knockoffs,1970 Midget?

Eighties Vintage Driving Suit, nice white Simpson with red trim. Nomex, single layer, old (2/83) but clean, not SFI labeled. Size M-L. Good for 6'2" tall 180 pound male. $40

Eighties Vintage Driving Suit, nice blue Simpson with white trim. Nomex, single layer, old (2/83) not SFI labeled. Size M-L. Good for 6'2" tall 180 pound male. $40

Shoulder harness pads, SafeQuip, new. $10/pair

Just realized i have a spare trailer wheel and tire that does not fit my trailer.

A couple years old, but mever used. It is a 6 bolt 15" with tire.

Make an offer.

In reply to Danny Shields:

I'll take the leaf blower

Next in line for the Rotas, lol.

Tom, how much are you thinking on the Isuzu? I'd have to look up the tow rating, but it should serve me alright with a lawn equipment trailer back there.

I have a 2001 Saab 9-3 convertible with a blown head gasket and cracked radiator. Located about an hour from the Challenge. Looks pretty good, but the top doesn't work. $120 for the whole thing, make an offer for parts. Too lazy to upload pics, but I'll email you some if you're interested. Pm through here works.