wvumtnbkr
wvumtnbkr GRM+ Memberand PowerDork
2/14/24 3:20 p.m.

So, I built / am building my 3.9 v6 powered rx8 over the last 2 years.

I got it running well enough to trailer it to the challenge last year.  However, since I got it running about 2 weeks before the challenge, I didn't even try for the underbudget category.  I just showed up to play with my new toy.

 

My budget right now is somewhere around $1900.  However, that includes recoup for a few big items.  

Now, here is where the poor planning and being a luddite venn diagrams come together...

I can't find the files on my laptop for the receipts for the selling transactions (and 1 of the buying transactions).  Furthermore, I have the threads on Facebook messenger, but the price listed is no longer visible after some amount of time and listed as sold.

So, here are the items (and what I *remember* i paid / sold them for).  Obviously, I would love it if 5 of you would either back me up, or suggest a new value.

 

Items I bought:

Engine- 2007 gm 3.9 60 degree v6 lz9 could be out of a minivan or a pontiac g6.  Originally listed for $400 with trans.  Paid $200 and left the Trans with the seller.

 

 

Items I sold (all items from 2004 Mazda rx8 6 speed):

Transmission (looked good, and functioned well according to the PO): $350.00

Engine (core with most accessories): $350.00

Driveshaft: $125

Starter motor (upgraded S2 type): $75

Ac compressor: $100

Catalytic convertor and exhaust from engine to end of cat: $150.

 

Feel free to either agree, or suggest a new value.  I am not trying to pull a fast one.

 

If you made it this far, thank you!  If you actually respond in this thread, I'll gladly give ya a hug at the challenge!

Stampie
Stampie GRM+ Memberand MegaDork
2/14/24 6:44 p.m.

In reply to wvumtnbkr :

In for the hug with this response.

Stampie
Stampie GRM+ Memberand MegaDork
2/14/24 6:50 p.m.

Going over the list my first thought was some seemed a little low, some seemed a little high, but all of them were within a range I'd consider acceptable.  So I'd give my approval.  My second thought was you could do better everything by using online prices yourself to get FMV.

wvumtnbkr
wvumtnbkr GRM+ Memberand PowerDork
2/14/24 8:15 p.m.

Can I just use a bunch of fbm posts with asking prices?

Stampie
Stampie GRM+ Memberand MegaDork
2/14/24 9:27 p.m.

In reply to wvumtnbkr :

Well some people like the ones that think you can sell a $2000 car with a required $1500 in junk parts would say yes there are others of us with less of a gray area.  To avoid being one of those people I would suggest using Ebay completed/sold items as your FMV.  You could also use junkyard price list.  Let me know if you need some websites for them.  

wvumtnbkr
wvumtnbkr GRM+ Memberand PowerDork
2/14/24 9:30 p.m.

Websites good!  I had my listed prices on fbm from car-parts prices.

 

Can I use car-parts prices?

Robbie (Forum Supporter)
Robbie (Forum Supporter) GRM+ Memberand MegaDork
2/15/24 2:00 p.m.

My advice is if it's what you paid it's what you paid. Document to the best of your abilities. 

If you're not trying to be a dick, you're not trying to be a dick.

Robbie (Forum Supporter)
Robbie (Forum Supporter) GRM+ Memberand MegaDork
2/15/24 2:01 p.m.

That said, I right now have a 6 speed renesis core in my shop, and I'd love it if someone gave me $350 for it. 

Is that what they are worth on FBmarketplace?

RacetruckRon
RacetruckRon GRM+ Memberand SuperDork
2/15/24 3:29 p.m.
Robbie (Forum Supporter) said:

That said, I right now have a 6 speed renesis core in my shop, and I'd love it if someone gave me $350 for it. 

Is that what they are worth on FBmarketplace?

Is that engine and transmission for $350? Asking for a friend.

wvumtnbkr
wvumtnbkr GRM+ Memberand PowerDork
2/15/24 3:43 p.m.

https://m.facebook.com/marketplace/item/2252311844968423/?ref=search

1250$ for an engine and Trans.  Engine is bad.

 

https://m.facebook.com/marketplace/item/961110192340111/?ref=search

Here is 1 /2 of an engine for $200...

 

Car-part search (screenshot)

The bottom half of car Part list (screenshot)

AngryCorvair (Forum Supporter)
AngryCorvair (Forum Supporter) GRM+ Memberand MegaDork
2/15/24 4:02 p.m.

in anyone's build book, i would accept car-part.com lowest price within 100 miles of their zip for both the buys and the sells.

asking prices are all over the map, as are offers. the car-part.com method is pretty consistent.

wvumtnbkr
wvumtnbkr GRM+ Memberand PowerDork
2/15/24 5:09 p.m.

Thank you.  I will gather car-part prices, ebay motors sold items and FBM to back up my numbers.

 

Much appreciated yall!

Robbie (Forum Supporter)
Robbie (Forum Supporter) GRM+ Memberand MegaDork
2/15/24 5:55 p.m.
RacetruckRon said:
Robbie (Forum Supporter) said:

That said, I right now have a 6 speed renesis core in my shop, and I'd love it if someone gave me $350 for it. 

Is that what they are worth on FBmarketplace?

Is that engine and transmission for $350? Asking for a friend.

No just engine, sorry. The engine is different for the manual trans cars vs auto and I was trying to be specific. Though I don't have an intake on the one I have so it may not be different anymore.

wvumtnbkr
wvumtnbkr GRM+ Memberand PowerDork
2/15/24 9:26 p.m.
Robbie (Forum Supporter) said:
RacetruckRon said:
Robbie (Forum Supporter) said:

That said, I right now have a 6 speed renesis core in my shop, and I'd love it if someone gave me $350 for it. 

Is that what they are worth on FBmarketplace?

Is that engine and transmission for $350? Asking for a friend.

No just engine, sorry. The engine is different for the manual trans cars vs auto and I was trying to be specific. Though I don't have an intake on the one I have so it may not be different anymore.

4 port versus 6 port is not just intake...  6 port is more desirable for straight swaps.

You'll need to log in to post.

Our Preferred Partners
4IcYUmWDk5eb7qx32O9Nv4fxsY2zP2NuSKMWkLkLEvIJML3huMYbJ4XmxpmKAjG6