1 ... 12 13 14 15 16
gumby
gumby GRM+ Memberand SuperDork
5/13/24 9:08 a.m.

6/8 is full
6/15 is possible
6/22 or 6/29 are better

I need 3wks advance notice to get a Saturday off, so there's that too.

Robbie (Forum Supporter)
Robbie (Forum Supporter) GRM+ Memberand MegaDork
5/15/24 10:48 a.m.

In reply to gumby :

There's a chance I could do 6/15 weekend too. 6/16 I believe is father's day if that matters to anyone. 

The following 2 weekends in June I am not available though.

Aaron_King
Aaron_King GRM+ Memberand UltimaDork
5/15/24 11:47 a.m.

Once the weekend is figured out I may be able to stop by, though I don't know how much actual help I will be.

AngryCorvair (Forum Supporter)
AngryCorvair (Forum Supporter) GRM+ Memberand MegaDork
5/15/24 7:08 p.m.

Weekend of 6/22 is good for me

Patrick
Patrick GRM+ Memberand MegaDork
5/15/24 7:58 p.m.

23rd is Carli's birthday so if we do that weekend you all have to sing to her and eat cake

Patrick
Patrick GRM+ Memberand MegaDork
5/21/24 8:29 p.m.

Ok now I need to dig up my septic system in June...

What's July look like for anyone interested? 

DeadSkunk  (Warren)
DeadSkunk (Warren) MegaDork
5/22/24 7:30 a.m.

I'm available any weekend.

 

XLR99 (Forum Supporter)
XLR99 (Forum Supporter) GRM+ Memberand SuperDork
5/22/24 8:33 p.m.

In reply to Patrick :

That sounds...not fun..

I'm around every weekend other than last weekend in July.

Patrick
Patrick GRM+ Memberand MegaDork
7/7/24 11:10 a.m.

Ok i am getting tractor borrowed to do my septic this month because june disappeared.

 

I'm setting in stone august 17-18(we can start on 16) book it we need to get moving on this car. I have a white board and will have a clean work area by then, I need hard deadlines. 
 

september will be labor day weekend or the next, whichever works best. Talk amongst yourselves for that. 
 

 

gumby
gumby GRM+ Memberand SuperDork
7/7/24 11:21 a.m.

8/17-18 is open, but Mrs. gumby just left for 6wks and that is her return weekend. I need to think on how I feel about this situation.

Labor Day weekend is likely open as far as I am aware.

 

Patrick
Patrick GRM+ Memberand MegaDork
7/7/24 4:36 p.m.

In reply to gumby :

If labor day weekend is open for you then we can set that E36 M3 in stone too. I'm at the cabin basically the last week of every month through November. 

DeadSkunk  (Warren)
DeadSkunk (Warren) MegaDork
7/7/24 6:27 p.m.

What kind of things should we plan on bringing? Tools, materials, etc.?

Patrick
Patrick GRM+ Memberand MegaDork
7/10/24 3:08 p.m.

Honestly tool wise there's probably nothing we need that I don't have. Do we need metal for the tunnel and firewall? Have some appliance sides that were free kicking around. 
 

this is where my head is at right now 

 

it wasn't supposed to be this way, but it is. 

XLR99 (Forum Supporter)
XLR99 (Forum Supporter) GRM+ Memberand SuperDork
7/10/24 5:31 p.m.

Some days you're the tank, some days you're the backhoe.

Patrick
Patrick GRM+ Memberand MegaDork
7/19/24 3:57 p.m.

In reply to XLR99 (Forum Supporter) :

I am the tank 

now we can move forward(clean the shop and get the corolla into position)

Gearheadotaku (Forum Supporter)
Gearheadotaku (Forum Supporter) GRM+ Memberand UltimaDork
7/19/24 6:46 p.m.

I can make it Labor Day weekend.

Patrick
Patrick GRM+ Memberand MegaDork
8/17/24 7:48 p.m.

Think we're scrapping labor day and going later in September because i ended up with a lot of conflicts. 
 

DeadSkunk  (Warren)
DeadSkunk (Warren) MegaDork
8/17/24 8:43 p.m.

Thanks to Patrick and his friends, the trans tunnel and firewall are almost done. Thanks to Brad, Keith and John for the extra help.

Patrick
Patrick GRM+ Memberand MegaDork
8/20/24 9:09 a.m.

 

 

when we ended sunday around 4 the tunnel was built, one of the two driver's side firewall panels was cut and the first of two closeout panels for the passenger side was in. The rear bulkhead is also now part of the car. I've identified a few spots here and there that need a little more weld and my goal is to get the firewall done and anything else welding wise in the interior complete so things can get seam sealed and painted. 
 

Also axehealey was instrumental in even being remotely ready to be able to start working Saturday morning. 

DeadSkunk  (Warren)
DeadSkunk (Warren) MegaDork
8/20/24 1:37 p.m.

I ordered the flares in the thread title this morning, almost four year after I  started the thread, and seven years after construction started......these...Universal Metal Fender Flares Style 2: 6" Wide, 4-piece set (hand-made) - Picture 1 of 2

Patrick
Patrick GRM+ Memberand MegaDork
8/20/24 3:03 p.m.

I am REALLY looking forward to getting my hands on the flares

Recon1342
Recon1342 UltraDork
8/20/24 4:00 p.m.

IT LIVES!!!!!!

Patrick
Patrick GRM+ Memberand MegaDork
8/20/24 5:01 p.m.

Patrick
Patrick GRM+ Memberand MegaDork
8/20/24 5:13 p.m.

 

AxeHealey
AxeHealey GRM+ Memberand SuperDork
8/20/24 8:55 p.m.

Dude! You are plowing through this!

Happy to help. Hope I can make it one of the wrenching days. 

1 ... 12 13 14 15 16

You'll need to log in to post.

Our Preferred Partners
QyOqjRDpkdB5SB9E71lvWgZxRaC22x8J8PwP7RBcMsZvuYdoAMASMFOOjtYi8cCy