1 2 3 4 5 ... 12
pimpm3
pimpm3 Dork
3/17/16 8:09 p.m.

Finding a 15x10 or 15x9 is pretty difficult isn't it?

Andy Neuman
Andy Neuman Reader
3/17/16 8:39 p.m.

I'll donate 4 15x9 to the build. Two have really old 275s on them.

pimpm3
pimpm3 Dork
3/17/16 8:42 p.m.

Sweet who makes 275's? Or should I be looking for slicks in that size.

On second Thought a 275 might be over kill for such a light low powered car, I would think a 225 or 245 max would be optimal.

SVreX
SVreX MegaDork
3/18/16 8:21 a.m.
pimpm3 wrote: Finding a 15x10 or 15x9 is pretty difficult isn't it?

Yep. 13's work too

Andy Neuman
Andy Neuman Reader
3/18/16 9:20 a.m.
pimpm3 wrote: Sweet who makes 275's? Or should I be looking for slicks in that size. On second Thought a 275 might be over kill for such a light low powered car, I would think a 225 or 245 max would be optimal.

Hoosier makes 275 and 245. I still think the 15x7 idea is the best since we won't have a use for these wide 15's after the event unless someone has a supply of free take offs.

echoechoecho
echoechoecho Reader
3/18/16 10:58 a.m.

This thread is awesome! I just convinced a buddy to hack up his $400 car in the same fashion and enter it in the challenge. question can we run no windshield at the challenge?

pimpm3
pimpm3 Dork
3/18/16 11:14 a.m.

A 225 45 15 may be best, we can throw them on your 15x9's, or we can go with my original plan of running a set of 205/50/15's on the 15x7's I already have.

Andy Neuman
Andy Neuman Reader
3/18/16 3:34 p.m.

Also my local dirt track store always has used springs in stock for $10-20 each.

SVreX
SVreX MegaDork
3/18/16 3:52 p.m.

In reply to Andy Neuman:

You have a local dirt track STORE??

Color me jealous.

pimpm3
pimpm3 Dork
3/18/16 4:46 p.m.
SVreX wrote: In reply to Andy Neuman: You have a local dirt track STORE?? Color me jealous.

There is one in Jacksonville. That's where I am planning on getting the roll bar tubing.

Andy Neuman
Andy Neuman Reader
3/18/16 4:53 p.m.

In reply to SVreX:

Yes, I'm too lazy to go to the swap meets to get the stuff cheaper like Andrew Nelson.

pimpm3
pimpm3 Dork
3/18/16 5:12 p.m.

I to am lazy, are the 15 x 9 wheels the right offset for a NA?

Andy Neuman
Andy Neuman Reader
3/18/16 7:58 p.m.

The perfect offset with a slight spacer in the front which I will bring.

SVreX
SVreX MegaDork
3/19/16 3:17 p.m.

In reply to Andy Neuman:

Are you wanting to sell these wheels after the Challenge?

I need a set.

pimpm3
pimpm3 Dork
3/20/16 7:20 p.m.

How about a NC?

Can't say I have seen a NC cart / ghettocet yet...

patgizz
patgizz GRM+ Memberand UltimaDork
3/20/16 7:42 p.m.

have andy get the wheels to me and ship the tires here, i'll mount/balance them and bring them down? that way $0 to a shop for mounting/balancing.

pimpm3
pimpm3 Dork
3/20/16 7:53 p.m.

In reply to patgizz:

I have a tire machine and balancer at work, we may go with 225's or 205's on my 7 inch wheels. If we get the NC obviously the tire selection will be different.

patgizz
patgizz GRM+ Memberand UltimaDork
3/20/16 7:55 p.m.

i have a set of EBC rear pads for an NC kicking around the kitchen somewhere.

pimpm3
pimpm3 Dork
3/20/16 7:58 p.m.
patgizz wrote: i have a set of EBC rear pads for an NC kicking around the kitchen somewhere.

Sweet! Hopefully I can get a deal on the NC.

JohnRW1621
JohnRW1621 MegaDork
3/20/16 8:08 p.m.

Can you get that NC approved to drive on the street?

pimpm3
pimpm3 Dork
3/20/16 8:14 p.m.

Sure why not, I don't think it will be to bad.

Andy Neuman
Andy Neuman Reader
3/21/16 10:17 a.m.

Hmmm.... If you get the NC I'll see if my spare mustang wheels from last years build fit on my friends dads NC. Also maybe Stampie still has the NC bilsteins from his Miata that you could use to make some type of coilover setup.

MrChaos
MrChaos GRM+ Memberand HalfDork
3/21/16 11:06 a.m.

In reply to JohnRW1621:

its Florida... you can register a dead manatee as a car there and no one would care.

Andy Neuman
Andy Neuman Reader
3/21/16 2:58 p.m.
patgizz wrote: have andy get the wheels to me and ship the tires here, i'll mount/balance them and bring them down? that way $0 to a shop for mounting/balancing.

I may take you up on that for he Q45, might also need help wiring up the nitrous.

pimpm3
pimpm3 Dork
3/24/16 12:04 p.m.

So finding a suitable Miata has proved to be more difficult then I initially anticipated. I have looked on copart, craigslist etc... Everything is more expensive then I want to spend or to far gone damage wise.

That started me thinking what other options are out there. I definitely want RWD, a manual, and preferably something with a decent aftermarket. My first thought was Corvette, because that seems like the easy answer and it has been done before. Then I realized that I already own the perfect vehicle...

1 2 3 4 5 ... 12

You'll need to log in to post.

Our Preferred Partners
L9shQLGDcTfWEiVc8ZY5DFAtRQoZBg5Tt4l0Vh9O6r7LrLJn9C16b8HUIz7YZ6sM