1 2 3 4 5
Patrick
Patrick GRM+ Memberand MegaDork
9/11/17 7:19 a.m.

In reply to singleslammer :

 

Jeremy had tires mounted near the hotel last year.  

Robbie
Robbie PowerDork
9/11/17 8:34 a.m.
Andy Neuman said:

I have a set of 205-55-14 hankook ventus autocross tires that I purchased new for my $2014 challenge CRX. $100 never used for the set of 4. They have been in my basement the entire time. 2014 was the fiero year. 

I also have a set of used 245/275-17 hoosier R6 tires that I'd let go for $50. 

I want those 14s from you. Need to figure out how to transport them (ie figure out how much fits in a Saab truck).

Robbie
Robbie PowerDork
9/11/17 8:37 a.m.
singleslammer said:

I am looking for a set of wheels for the Jag XJR6 that I am getting this weekend. It is 5x4.75 with a 74mm center bore and stick a +32 offset. No idea what would fit. I have a set of 18 in autocross tires I got from Stampie last year but no wheels. Or if someone has a set I can borrow/buy real cheap that would be great too. No need to find a place to mount these stuff tires in Gainsville.

Aren't the stock wheels big fat 18s already?

Otherwise it sounds like this corvette stuff should fit pretty well.

singleslammer
singleslammer PowerDork
9/11/17 10:00 a.m.

In reply to Robbie :

The stock wheels are 17s but those are long gone, except the spare, and this one is on 98-00 base model 16s. I can't complain too hard though as they should have good tread and the car is only $1k.

Bobzilla
Bobzilla MegaDork
9/11/17 10:11 a.m.

In reply to Dusterbd13 :

A pair of baffled SBC valve covers? 

Andy Neuman
Andy Neuman Dork
9/11/17 1:03 p.m.

In reply to Robbie :

I can bring the 14" tires. Just bring a few straps to tie them down. 

Are you planning to run the Chop top challenge with your saab after the challenge? 

Dusterbd13
Dusterbd13 UltimaDork
9/11/17 4:36 p.m.

In reply to Bobzilla :

None. Sorry...

Ovid_and_Flem
Ovid_and_Flem Dork
9/11/17 4:54 p.m.

In reply to Dusterbd13 :

Hey duster...not gonna be able to use the 15" slicks.  Thanks anway.

Dusterbd13
Dusterbd13 UltimaDork
9/11/17 5:55 p.m.

In reply to Ovid_and_Flem :

No problem.  

GVX19
GVX19 Reader
9/11/17 8:05 p.m.

In reply to singleslammer :

GM RWD wheels, are what your liking for. Camaro & Corvette are the most common wide wheels. 

Ovid_and_Flem
Ovid_and_Flem Dork
9/12/17 7:39 a.m.

Oh yeah...I have both right and left complete head light assemblies with working motors available.  1989 c4 corvette.

I'm like patrick in that I ain't hauling stuff to challenge unless somebody wants it.

singleslammer
singleslammer PowerDork
9/12/17 8:47 a.m.

In reply to GVX19 :

Yep, I have been looking for those. The issue is that most of the stock rims have too small of a centerbore. I need 74.1mm or bigger and most of the GMs are in the 60s from what I have seen. 

singleslammer
singleslammer PowerDork
9/14/17 9:44 a.m.

I have some stuff that is up for grabs. 

Mk3 Supra w58

4-15"x 6" 4x100 steel wheels off a Mazda2. Clean and straight.

Anything that can be cut out of flat metal. The CNC plasma has had most of the wrinkles sorted out.

Patrick
Patrick GRM+ Memberand MegaDork
10/1/17 5:20 p.m.

Bumping.  

Who else needs things?  So far i'm bringing 6 tires, 5 wheels, and I can't remember what else but anything else i can bring that's large and in my way will be cheap up to the point that I can't pack anything more.  

Hvac guy?  I have some full refrigerant cylinders (r500, 401a) that i'll sell for half the going rate on ebay.  

I have some wheels.  American racing billet early 00's stuff.  17x8 4" bs and 17x9.5 5" bs 4.5 and 4.75 bolt circles.  0 miles but mounted(front have 245/45 tires) $150 for all 4 no caps.  

Have both types of 93+ s10 15" aluminum wheels $50 a set.  

Plastic 20 gallon fuel cell $15

beer keg $15

sbc stainless block hugger headers $25

sbc performer intakes 50 each

5.3 heads $10/pr

Andy Neuman
Andy Neuman Dork
10/1/17 5:24 p.m.

In reply to Patrick :

I need a car that runs 9's and can still handle a little for less than $2000 can you bring it? 

Other than that I'm starting my search for a MIG welder. 

Dusterbd13
Dusterbd13 UltimaDork
10/1/17 5:53 p.m.

Pat:

Pics of wheels? The billet ones.

 

Also I am bringing the tuned Port computer for Stampy, 4 Hoosier slicks for Pat, I Miata engine and top for yupididit, shocks and sway bars from a C5 Corvette for Pat, and it seems like I'm forgetting something else. Have a whole anybody else I bring them anything at the challenge?

Danny Shields
Danny Shields GRM+ Memberand Reader
10/1/17 5:57 p.m.

I could use a mini spare tire, jack and lug wrench for a current body style Grand Caravan. Seems they don't all come with those any more.

Danny Shields
Danny Shields GRM+ Memberand Reader
10/1/17 6:00 p.m.

In reply to Ovid_and_Flem :

What are you looking to get for those 17 inch Porsche twists?

Patrick
Patrick GRM+ Memberand MegaDork
10/1/17 6:07 p.m.

i wonder if a 6.0 lq4 with an 80mm turbo in a gutted s10 would do 9's.  

Ovid_and_Flem
Ovid_and_Flem Dork
10/1/17 6:14 p.m.

In reply to Danny Shields :

I'll have to double check whether they are repops or factory.  They were on my 1987 911 requiring spacers when I bought it and I immediately replaced with fuchs.  They are not concours with a little light curb rash but are straight and tru.  Good for track duty.  I know they're not going for much whether real or repo.  

Of course carry GRM heavy discountwink

 

 

GTXVette
GTXVette Dork
10/1/17 7:27 p.m.

In reply to Patrick :

lets break out the old Slide rule and see..   2000 lbs and 600 hp sound about right?

Patrick
Patrick GRM+ Memberand MegaDork
10/1/17 8:52 p.m.

Also:

firestone transforce ht lt275/70-18 pair 50% tread $100 19 months old

265/70-17 hankook dynapro atm have about 95% tread left, late 2014 dated.  On vision black 17x8 8x6.5 wheels that were new with tires $400

17x? Stock wheels from 05 avalanche $100 with nitto tires that have about 15% left, one needs patched from inside.

new radiator for a mid 00's accord $20

seriously i could make a list all day.  

This is the chance for you guys that are always like "ugh too far" to get E36 M3 brought to you.  

Dusterbd13
Dusterbd13 UltimaDork
10/1/17 8:53 p.m.

Still got that big block truck? Have space/time?

Ranger50
Ranger50 UltimaDork
10/1/17 8:56 p.m.
GTXVette said:

In reply to Patrick :

lets break out the old Slide rule and see..   2000 lbs and 600 hp sound about right?

3200-3400# and 700rwhp sounds better....

If you could find a China copy 7875, you'd be in the ballpark...

Patrick
Patrick GRM+ Memberand MegaDork
10/1/17 8:56 p.m.

In reply to Dusterbd13 :

Have truck, dont have time to do anything except load car and parts and go.  Have an addition that just passed rough framing inspection that must be done before i go to Florida.  Add put new tires on the ram to the list, backs are beyond wear bars because I didn't rotate them.  Ever.  Was planning a more snow friendly tread before winter anyway, but i have some coming Wednesday to be safe on the long haul.

1 2 3 4 5

You'll need to log in to post.

Our Preferred Partners
u4tX1n7vouc0VezLN6eKDGxlO5wDjihd2pN85btMW6KPOmnmuGy7p1u94wd1Lyac