FS: Miata Parts - Torsen swap, brake brackets, etc (Atlanta)

Got some NA 1.8 Miata parts for sale and I figured I offer then up here before putting it all on CL. Parts are in Atlanta. I'd rather not ship (esp. the differential and rear trim panel). Possibly can deliver if your location is between Atlanta and upstate NY as long as you can wait until the 4th of July. Will negotiate on all parts. Interested in other miata bits and general racin' stuff.

All parts came from a '95 with A/C, cruise, and leather, was running/driving, female owned, hit in front driver's fender.

Torsen swap including everything you should need (Carrier with torsen dif and 4.1 gears, axles, axle stubs, mounts, driveshaft). Only damage is one small heat-sink fin broken on the carrier. I pulled the drain plug and the oil was nice and clean - looks to be in excellent condition. I'll start asking $1000 for the whole swap since that seems to be the going rate, but shoot me any offers. Would be interested in trades for a nice track racing suspension setup for a NA/NB miata (coilovers, sway bars, etc).

Rear trim/filler panel. Color is dark blue. Clear coat is coming off in some places. Plastic is in excellent condition with no cracks or signs of distress. Looks like ones with decent paint are going for somewhere between $100 and $200. Make an offer.

NGK plug wires. Unknown condition/miles. Look a lot newer than the ones on my car, which work fine though. Make an offer.

1.8 Brake brackets. Will let you swap to 1.8 rotors/pads. Comes with the hardware and a set of new parts store front brake pads (they're metallic, that's all I know). Seems like these usually go for ~$100 and I think they're a lot more through the Mazdaspeed Parts Program. Make an offer.

Let me know if you have questions about any of this.

Thanks,

Jared

Putting these on CL today. If anyone is interested let me know.

Despite some flakey CL interest I still haven't sold any of this. I'd like to get the garage cleaned out a little more, so if there's anything you want, shoot me an offer. Willing to negotiate a fair bit on prices.

I'll give you $10 for the plug wires...?

In reply to Duke:

PM Sent

Thanks!

Also have a NA 1.8 gauge cover for sale. Came out of a `95. Two mounting tabs are missing, but the others are fine. Still in very usable condition I'd imagine. Best offer + shipping.

I need the LSD, my turbo 1.8 ate the current one, Pull-a-part South had the car but you beat me to it. Go 200$ on the LSD, picked up in ATL?

Willing to go $45 shipped on gauge cover?

$75 shipped to 77062 on the brake brackets + pads?

PMs sent. Thanks for the interest.

I have been out of the Miata game for too long. I had no idea the LSD was worth that much!

Well I don't know if anyone will pay me that much, but it looks like the swap as a kit usually goes for $900-1200 on the miata forums. Just the LSD gearsets are going for $400+ on ebay.

Lsd pop up, here is one asking $350 on CL:

http://atlanta.craigslist.org/nat/pts/3869515018.html

Or just be the first one to pull-a-part when it comes in. : ) Then it's $80 !

Yeah looks like a good deal if you don't need the whole swap. You should buy it.

Brake brackets, pads and hardware sold and shipped. Thanks Winston!

Looks like the plug wires are gone too. Thanks Duke!

Plug wires shipped to Duke - Thanks!

Look forward to getting them - my cobbled intake has about worn the other ones through. Thanks for the great communication and prompt service.

jstancel wrote: I have been out of the Miata game for too long. I had no idea the LSD was worth that much!

Maybe youre thinking of VLSDs? The torsens have been worth $700-1500 for many years, if anything they have decreased in value. In the past any torsen swap for 1k was easily sold immediately. The 4.1 is the least 'valuable' or sought after torsen unit at this point. Typically I get $600-750 for those swaps. The diff itself is worth $350-450 as the OP stated, the axles are worth $100 ea, and the drive shaft is an easy $100 by itself. Resellers of race parts typically get $1200+ for the 4.3 swaps currently.

Pull a Part has no relation to actual parts value, they sell based on scrap value and generally dont have any Miatas.

Torsen swap: $600 shipped to 60657. I'm not arguing with your estimation of value, just trying to get a deal.

In reply to Liquidog:

If we were talking local pick up, I'd say lets work something out. But, the hassle and cost of shipping is just too high.

That's fair. Let me know if you change your mind. We can definitely discuss price.

In reply to Liquidog:

Will do.

In reply to psteav:

Did you receive my PM about the gauge cover? Let me know if you're still interested.

In reply to JohnyHachi6:

Received. had to check with my dad, but he's still interested. YGPM.