Ga: LOTS of challenge priced parts for sale!

I'm moving to a house that has a much smaller shop and I'll be much more limited on what I can do. My loss can be your gain as I have no choice but to sell a lot of the parts I've accumulated over the years. I'm in Columbus, GA about 90 miles south of Atlanta. I'm willing to meet within a reasonable distance or ship. Message me through the forum or email at from_afar78 at hotmail dot com.

97-99 Acura 2.3CL front rotors, brand new PBR pieces. These also fit 94-97 Honda Accords with rotor over hub conversion and I believe all 98-01 Accords - $15/pair

12" Audiobahn sub - Sold

Generic "Type R" boost gauge - Sold

Generic "Type R" oil pressure gauge - Sold

Tokico HP "Blue" front and rear shocks for E30 -Sold

(8) Ford 24lb injectors, 4-hole, one has a broken tab where the connector goes and is missing the plastic fitting on the end, was told they only have 30k miles on them - $35

Mr Gasket hood pin set - Sold

No-name intercooler, 28"l x 6 1/8"t x 2 1/2"d2 3/4" OD inlet/outlet. New, still in the box - $45

-4 oil feed line for T3 turbos w/feed and drain flange, misc fitting and hardware - $25

Paxton FMU - Sold

OEM SRT-4 intercooler, great shape - $70

Older Garrett T3 turbo, .48 A/R, internal wastegate, 0 miles on fresh rebuild - $175

Tokico E36 springs - Sold

OEM VW 1.8T side-mount intercooler, has one broken tab but otherwise in great shape, comes with "thrust sensor" - $10

Generic aluminum intercooler piping for a WRX - Sold

No-name Integra short-ram intake with super awesome yellow coupler and hose, new - $15

Energy Suspension coil spring isolator, style C, black. 2 3/4" inside dia, 4 3/8" outside dia, 7/16" pad thickness, 13/16" lip height. Part # 16.6101G, purchased for the front of a 94 Accord. New, never used - $5

E30 slotted front rotors, brand new - $85

Set of 17x7 Team Dynamics wheels - Sold

Set of Falken Azenis RT-615 tires with one track day on them - $190

E30 inner and outer tie rod set, driver and passenger sides, new - $35

New parts added 10/04:

88-00 Honda Civic stainless steel test pipe - Sold

Misc silicone couplers, vary from 1.5" to 4" in diameter - $20

2.5" mild steal exhaust flanges, 5/16" think I think, I have 2 - $10/pair

Earl's stainless braided hose, 10' of -3 Speed-Flex and 3' of -10 Auto-Flex - $35 for both or will seperate

Misc Earl's Auto-Fit aluminum fittings, compatible with both hoses above, -10 45 degree, -10 straight, -10 plug, -10 to 3/8NPT adapter, -3 straight, -3 90 dregree, -3 plug (has two in the package) and -3 to 1/8NPT adapter - $50 for everything or will seperate

VAG diverted valve, works perfect, pulled from an 01 Jetta - $5

G-Force back up plates and eyebolts - Sold

And I've found more parts I need to get pics of and add.

Interested in the 17x7 wheels! Do you know the offset? Looking at a Miata fitment. And the Azenis if they fit those wheels.

You have mail.

dyintorace wrote: Interested in the 17x7 wheels! Do you know the offset? Looking at a Miata fitment. And the Azenis if they fit those wheels.

I'll check the offset tomorrow and let you know. The tires are 215/40-17 so they may fit a Miata depending on which model. I'm not familiar enough with them to know though.

If you're interested in the wheels and tires together I can make you a package deal.

Any chance of purchases being delivered to the GRM Challenge in a few weeks?

need hood pins email and PM

GPDren wrote:

dyintorace wrote: Interested in the 17x7 wheels! Do you know the offset? Looking at a Miata fitment. And the Azenis if they fit those wheels.

I'll check the offset tomorrow and let you know. The tires are 215/40-17 so they may fit a Miata depending on which model. I'm not familiar enough with them to know though. If you're interested in the wheels and tires together I can make you a package deal.

Package deal might work!

hobiercr wrote: Any chance of purchases being delivered to the GRM Challenge in a few weeks?

+1. I'll be there and would love it if the parts made their way to Gainesville!

PM sent.

I can haul stuff to the Challenge.

I'll take the boost gauge. Email sent.

If you can get me some pics of the wheels and tires, I might take SVreX up on his offer to deliver to the Challenge.

I can't make it to the Challenge this year but I did email SVreX about the possibility of hauling some parts. I'll let you guys know if we can work something out.

I checked the wheels and all I could find that looked like the offset is 25 but the wheels are only offered in +35 to +50. I'll break out the straight edge and measure them tomorrow.

I think I responded to everyone's message and/or email but if I missed you just let me know.

oh those wheels are awesome!

I'll be hauling stuff to the Challenge. I also have a lot of stuff of my own- I'll post soon. I'll start another thread and link it here so people looking for stuff at the Challenge can find it all together.

The gauges, FMU, intercooler piping, hood pins and possibly the subwoofer are pending payment.

And a big thanks to SVreX for the help hauling parts!

corytate wrote: oh those wheels are awesome!

I love the color. Not sure if they were repainted but it looks like the original color. The guy I bought them from said his kids called them macaroni wheels.

You can pay me back in time doing bodywork and sanding!

arrrgghh too late. I wanted that oil pressure gauge.

Let me know about the offset.

dyintorace wrote: Let me know about the offset.

If I'm calculating it right, they're +40mm. They' about 1 5/8" positive offset which converts to +41.275mm. Adjusting for my imprecision to +40mm?

Thanks for measuring. Given the money I've been spending on Challenge-related items, I'm going to have to pass. Sorry.

dyintorace wrote: Thanks for measuring. Given the money I've been spending on Challenge-related items, I'm going to have to pass. Sorry.

No worries.

Dropped some prices today. Almost out of time to have the part delivered to the challenge and save on shipping.

I sent you an email, I just wanted to make sure I get my foot in on this one. Interested in the shocks, springs and maybe tires.

New parts added today.

BadCo wrote: I sent you an email, I just wanted to make sure I get my foot in on this one. Interested in the shocks, springs and maybe tires.

Shipped today. Thanks!