Help me find this swabar endlink. Especially if you work at a parts store.

For Tunatruck, I desire a readily available short swaybar endlink which has at least one end on a balljoint at a right angle to the axis of the endlink itself.

Like this:

The other end can be the same, or it can be a balljoint without the right angle.

I need a few different vehicles to check the lengths of to see if there is one out there short enough for my plan.

Thanks in advance!!

Power Grid Inc offers a variety of adjustable ball jointed end links. Not a canoe but a user (on my SVX) and Chip the owner is a stand-up guy!

C5 corvette. 98-04.

In reply to wawazat:

OK that place is crazy expensive... BUT I believe gives an excellent list of that style endlink which I can cross reference.

THANK YOU

These might also be useful. We have a couple of different lengths.

https://www.flyinmiata.com/nb-racing-beat-end-links.html

In reply to Keith Tanner:

Can you perhaps tell me the stock length for Miatas of varying generations?

aww crud, just noticed the misspelling in the title

In reply to Dusterbd13:

Good call there

I do not have a list of all stock lengths for all Miatas handy. But for that style of end link, you're looking at NB/NC/ND. One of the ND ones is super-short, about as short as possible.

1G DSMs use those too.

Late model Nissans often use links in the 2-3 inch range.

Acura TSX
BMW E30
Cadillac CTS or XLR
Corvette C5
Ford Fusion
Honda S2000
Infiniti G35
Mazda 3, Miata, RX8
Mitsubishi Eclipse 06-07
Nissan Maxima 00-03
Pontiac Vibe
Saturn SC

Does anyone have one of those to measure?

I may be misunderstanding your original post... but I think these would work:

They are for a Saturn rear swaybar. Moog ones are mega tough and sell for like $7.

ProDarwin wrote: I may be misunderstanding your original post... but I think these would work: They are for a Saturn rear swaybar. Moog ones are mega tough and sell for like $7.

Nope, you got it. That is on the list, I just need some lengths without resorting to measuring ones in the parking lot.

iadr wrote: I can measure some Mazda ones tommorrow.

thanks!

The one you posted looks a lot like an AE92 rear endlink, except in your pic the endlinks don't seem to be a full 180deg apart. The front endlinks are similar (and even shorter) but both balljoints face in the same direction.

I'll be under an NB Miata in the next few days and will measure if someone else doesn't get those first.

Front link for a 92-02 Corolla, and others as big as the Avalon. I've got one kicking around somewhere, I'll dig it out and update with measurement.

EDIT: 60 mm between centers, M10 studs.

Moog problem solvers for my 2006 legacy are full metalic and seems pretty heavy duty. Front has ball joint on either ends positions 180 degree apart. Rear have 2 ball joints on the same side. I can crawl under the car tomorrow if need.

Saturn Vue rear endlinks have a balljoint on one side and a stud on the other, might be useful:

Item link

Why's no one mentioned cut and weld to length? or eve order some junk off McMaster Carr and make fancy spherical adjustable ones

Heim joints and allthread from a hardware store.

chiodos wrote: Why's no one mentioned cut and weld to length? or eve order some junk off McMaster Carr and make fancy spherical adjustable ones

Fancy spherical ones A) Don't last as long, B) Are more expensive, and C) Don't look OEM (and that is important here)

Javelin wrote: Saturn Vue rear endlinks have a balljoint on one side and a stud on the other, might be useful: Item link

That it may, thanks for the reference.

Kenny_McCormic wrote: Front link for a 92-02 Corolla, and others as big as the Avalon. I've got one kicking around somewhere, I'll dig it out and update with measurement. EDIT: 60 mm between centers, M10 studs.

Thank you!