1 2
92CelicaHalfTrac
92CelicaHalfTrac SuperDork
8/20/11 6:25 p.m.

Hrmmm.... wonder if it would bolt up to a W58...

moparman76_69
moparman76_69 New Reader
8/20/11 8:48 p.m.
92CelicaHalfTrac wrote: Hrmmm.... wonder if it would bolt up to a W58...

No but the AX15 used in 2.4 wranglers and libertys (liberties?) shares the same bellhousing to trans pattern as the R154. 94-96 2.5 chrysler powered dakotas used a AX15 also and almost bolt up to the 2.4

njansenv
njansenv HalfDork
8/20/11 8:54 p.m.

You can use a DOHC neon head in a pinch, or (better) just a standard PT head.

kb58
kb58 HalfDork
8/20/11 11:44 p.m.
PseudoSport wrote: Actually I don't own any vehicle this engine would currently fit in. I was thinking about picking it up and hanging onto it to use in a future challenge project.

Put it in a Midlana .

Vigo
Vigo Dork
8/21/11 3:21 a.m.
Wait a minute.... SRT4 2.4T-powered.... Toyota Truck?

OR dakota or anything else you can make it bolt to.. point being the stock 2.2 dak trans is ax-5 and cant take the 2.4. The ax-15 could but wouldnt shift as nice as r-154.

1 2

You'll need to log in to post.

Our Preferred Partners
RNSgKICR2nAmawL4RX61rHWOTGys8Ix1D1BLDCHnzrModJDOk5yYebaMgon5Z9W7