Why not? I am helping a friend put a MKIII Supra suspension under a TR6.
Why not? I am helping a friend put a MKIII Supra suspension under a TR6.
Does the Supra use font and rear subframes? Or does everything just bolt to the unibody?
Gearheadotaku wrote: Does the Supra use font and rear subframes? Or does everything just bolt to the unibody?
Subframes.
Sean Korb (sp?) built a first gen Mustang with Supra bits under it for Challenge money. The "Suprang".
If you're going through all that trouble, is there a reason to not use something more conventional like Corvette parts (at least in front)? There's more than a few people out there doing this sort of thing and it seems like following along might have some advantages as far as parts availability and setup knowledge.
Sorry, I double posted and have a much longer/more though out post immediately above. Thanks for the quick response though.
psteav wrote: Sorry, I double posted and have a much longer/more though out post immediately above. Thanks for the quick response though.
Direct link to psteav's longer post: http://grassrootsmotorsports.com/forum/grm/modern-suspension-under-a-70s-musclecar/50393/page1/
You'll need to log in to post.
