Woody
Woody GRM+ Memberand MegaDork
9/12/12 12:46 p.m.

These are cheap and we need them.

http://www.popsci.com/diy/article/2012-05/powerful-affordable-mister-save-overheated-firefighters

2012 Invention Awards: A Powerful, Affordable Mister to Save Overheated Firefighters Invention Awards 2012 A revitalizing cloud of mist for overheated firefighters By Nicole Dyer Posted 06.12.2012 at 5:04 pm 10 Comments

Quick Fix Michael Robinson’s original mister prototype took him only 30 minutes to make. Hollis Bennett

One evening last fall in Heiskell, Tennessee, Michael Robinson was battling a house fire when he saw a fellow firefighter struggling to pick himself up off the ground. The man, who was wearing 70 pounds of gear, was delirious from heat and overexertion. Robinson rushed to his side, removed him from the area, and cooled him down as best he could with wet towels. Very slowly, the firefighter’s core temperature returned to normal, and eventually he recovered. But, Robinson says, the outcome could have been much worse.

Heat stress increases firefighters’ risk of sudden cardiac arrest, which accounts for about half of all line-of-duty deaths. Well-funded fire departments use misting fans and cooling vests to prevent crew members from overheating. But the Heiskell Fire Department, like many others, can’t afford a paid crew (71 percent of all firefighters in the U.S. are volunteers). Its tight budget leaves little room for anything beyond wet towels.

After the incident, Robinson resolved to find a better way to cool down on the job. Misting fans help, but besides their high cost, they require an external power source, take up space on the truck, and need a lot of setup time. Robinson thought of a simple solution. Why not turn the discharge caps that cover the hose ports that are standard on all fire trucks into water misters? A typical truck has six to eight ports that connect to an onboard water tank, one or two of which usually sit idle during a fire.

A few weeks later, Robinson went to a friend’s fabrication shop to build a prototype, which he named HeatSeeker. He machined six holes in a brass discharge cap and screwed in six standard mister nozzles from Home Depot. Back at the station, he screwed the device onto one of the trucks, turned on the water, and watched a cloud of mist large enough to envelop two firefighters waft from the nozzles. The fog can cool the surrounding air by 30 degrees, and the misting nozzles use just two gallons of water an hour. Robinson’s invention worked so well that his captain asked him to make them for the 15 other trucks in the fleet.

He built more than 50 HeatSeekers for other fire departments. He’s even adapted a cap for fire hydrants to cool children down during the summer and one for garden hoses to cool people in outdoor spaces such as concert venues. Anywhere heat can kill, he says, his invention can save lives.

Inventor: Michael Robinson Invention: HeatSeeker Cost to develop: $50

cwh
cwh PowerDork
9/12/12 1:15 p.m.

Real American ingenuity. Hurrah for him!

turboswede
turboswede GRM+ Memberand PowerDork
9/12/12 1:17 p.m.

That. Is. Just. Awesome.

Keith Tanner
Keith Tanner GRM+ Memberand MegaDork
9/12/12 1:37 p.m.

Clever and easy to do. Nice work.

Of course, if I worked at a fire department, I'd grab a drill and a tap and make my own in less time than it takes to order one

MrJoshua
MrJoshua PowerDork
9/12/12 1:39 p.m.
Keith Tanner wrote: Clever and easy to do. Nice work. Of course, if I worked at a fire department, I'd grab a drill and a tap and make my own in less time than it takes to order one

They do just sit around all day. Right Woody?

Woody
Woody GRM+ Memberand MegaDork
9/12/12 2:26 p.m.
MrJoshua wrote:
Keith Tanner wrote: Clever and easy to do. Nice work. Of course, if I worked at a fire department, I'd grab a drill and a tap and make my own in less time than it takes to order one
They do just sit around all day. Right Woody?

Sorry, I can't read what you wrote. I have melted roofing tar in my eyes. Again.

Kenny_McCormic
Kenny_McCormic Reader
9/12/12 2:30 p.m.

Why do I always think of really simple stuff like this that could make me billions, after somebody else already did it?

Woody
Woody GRM+ Memberand MegaDork
9/12/12 2:38 p.m.

The truly amazing part is the fact that it uses two gallons per hour. Nozzles are rated in hundres of gallons per minute.

SyntheticBlinkerFluid
SyntheticBlinkerFluid UltraDork
9/12/12 2:55 p.m.

Tell the fire department?

I want one of those on my work van!!

Keith Tanner
Keith Tanner GRM+ Memberand MegaDork
9/12/12 3:33 p.m.
MrJoshua wrote:
Keith Tanner wrote: Clever and easy to do. Nice work. Of course, if I worked at a fire department, I'd grab a drill and a tap and make my own in less time than it takes to order one
They do just sit around all day. Right Woody?

Hey, I work with two volunteer EMT/fire fighters and live right by a fire station so I get to hear when they pull out. I know it's not all sitting around. But it really wouldn't be more than 30 minutes of work - the sort of thing you could do instead of watching the news one night. Or while watching the news.

Woody found time post to the forum about these. So there's at least some sitting around

A setup like this would be particularly useful around here with our high temperatures and low humidity. The cashier stations at the outdoor garden section of Home Depot have misters on them.

MrJoshua
MrJoshua PowerDork
9/12/12 4:17 p.m.

In reply to Keith Tanner: I have a buddy who is a firefighter in Gainesville. I have to pick on them when I get the chance.

They occasionally have misters around Gainesville at bars and such. They work even with our swamp humidity.

MrJoshua
MrJoshua PowerDork
9/12/12 4:18 p.m.

If you DIY one: make sure you get nice threads on those holes. I could just see a little brass nozzle/bullet shooting off when you feed pressure to your homebrew mister.

Keith Tanner
Keith Tanner GRM+ Memberand MegaDork
9/12/12 5:02 p.m.

Can you regulate the pressure on those discharge caps?

Grtechguy
Grtechguy UltimaDork
9/12/12 7:04 p.m.
MrJoshua wrote: If you DIY one: make sure you get nice threads on those holes. I could just see a little brass nozzle/bullet shooting off when you feed pressure to your homebrew mister.

Thread the nozzle's from the inside of the cap?

Beer Baron
Beer Baron PowerDork
9/12/12 7:19 p.m.
Datsun1500 wrote: I'm betting he's got a patent.

That does not stop you from building your own copy. Only stops you from selling your own copy.

Tom Suddard
Tom Suddard GRM+ Memberand Intern
9/12/12 8:52 p.m.

Great idea, I just sent the link on to the Ormond Beach fire department.

novaderrik
novaderrik SuperDork
9/13/12 2:01 a.m.

so this wasn't a thing until recently?

dj06482
dj06482 GRM+ Memberand HalfDork
9/13/12 10:12 a.m.

Great idea!

Conquest351
Conquest351 SuperDork
9/13/12 11:05 a.m.

If I had the extra cash, I'd go out and buy a few for our local FD.

Appleseed
Appleseed PowerDork
9/13/12 3:02 p.m.
Conquest351 wrote: If I had the extra cash, I'd go out and buy a few for our local FD.

I was thinking the same thing.

GameboyRMH
GameboyRMH GRM+ Memberand PowerDork
9/13/12 3:52 p.m.

I'll send the link to a firefighter I know.

You'll need to log in to post.

Our Preferred Partners
ffzURp1MJw2SEYBC4JpWoUinuksuh8U7UciFILvMgfGFgwmjH8q36fOa5nWZetC9