Trying to get more space back in the next month or so, so I am cleaning up my garage and storage locker some. No shipping on anything, at least until stay-at-home orders are relaxed considerably, then I can check how much extra it will cost. And no shipping at all on bigger things. I'm happy to hold onto parts at least until sometime in May if someone calls dibs. I'm located in SW Ohio just east of Cincinnati.
I'll add parts as I go through the garage. Any stuff listed as free, if it doesn’t get dibs called will just get dumped in the trash once I actually have room after cleaning the actual trash out of my garage.
3rd gen f-body radiator - used, $5
12mm x 1.5 security lug bolt set. No key (I need it for my Miata's lug nuts), might be able to get one in the HF key set. - Never used - Free
E36 M3ty Miata/Jeep projector headlights with LED halo - Free
Quick bump - some of the free stuff may disappear soon - tomorrow is trash day.
Got a pic of the EGR block off plate?
In reply to Stampie (FS) :
In reply to eastsideTim :
Thanks but was hoping it’d fit my generic shape.
You know... it'll have to wait until Big Andy says we're allowed to go out and play again, but I will happily buy those dogbone wrenches and the poly bushings if you still have them. I've always eyed those in your toolbox with some level of envy. And I've already come clean on my sick fetish for random suspension bushings.... I could either use them in the construction of my new motor mounts for teh Ne0n or -- better yet! - I could store them with all the other one-offs that I've got!!
In reply to Stampie (FS) :
No problem.
In reply to wae (Forum Supporter) :
No problem I’ll set them aside for you.
I'll take the diff shims.
79rex
Reader
4/18/20 8:34 p.m.
did the egr plates go away yet? If not ill take them, if your willing to ship. Ill pay for shipping and a little extra for your troube if youd like. BTW those definently look like neon ones.
79rex said:
did the egr plates go away yet? If not ill take them, if your willing to ship. Ill pay for shipping and a little extra for your troube if youd like. BTW those definently look like neon ones.
Nope, I’ve still got them. As long as you don’t mind waiting until the stay at home order is lifted, I can ship them. Shouldn’t be too pricey, since they should go in a padded envelope.
79rex
Reader
4/18/20 8:57 p.m.
I dont mind waiting at all. My car is pretty useless to me untill events start happening anyway.
In reply to eastsideTim :
You can schedule pickup for free if you buy postage online and even Have a pack of flat rate envelopes delivered. If they're under a pound they can go parcel post.
In reply to Patrick (Forum Supporter) :
Thanks for the info. If I reach a point where I’m shipping multiple things, I will probably go with that.
(Frankly, when I saw you’d posted in here, I was hoping it meant the SBC intake was spoken for 
)
Call dibs on the Miata headlights with LED halo, if/when you can ship them to CT.
dan0 said:
Call dibs on the Miata headlights with LED halo, if/when you can ship them to CT.
Sure thing. I'll make sure to get some photos up before I ship them in case you change your mind. I think i can fit them in a medium priority mail box.
In reply to eastsideTim :
I have a pile of them since I have gone LS on half the things
Patrick (Forum Supporter) said:
In reply to eastsideTim :
I have a pile of them since I have gone LS on half the things
I suspect there are a lot of people with the same problem right now. I also have a box in the garage with a non-computer controlled distributor, a v-belt alternator, water pump pulley and crank pulley, and alt brackets, in case I was going to ditch the serpentine belt in the S10. I should probably dig that out and sell it, too.
I have a buddy who is building a small block chevy. Would you ship the intake manifold? Sounds like you might have a distributor for it too?
jfryjfry (Forum Supporter) said:
I have a buddy who is building a small block chevy. Would you ship the intake manifold? Sounds like you might have a distributor for it too?
I'll have to check and see what it would cost to ship the manifold in the next few days. What part of the country would it be shipping to? If I can find the distributor, I'd probably toss it in for really cheap (like whatever they go for as a core), since I can't confirm whether it works or not.
Sounds great. Los Angeles (90245)
I should slowly emerge from hibernation this weekend, so will be able to get estimates for shipping. If anyone want to PM me a mailing address, that’s cool. Professor_Brap, since we seem to run in the same circles, do you want me to see if I can relay the shims to you, or should I see about mailing them?
