Cleaning up the shop. I have a bunch of parts that I have used thinking I'd be using them for one project or another. As a result, they are just sitting around gathering dust. Would rather sell them on to someone to use in their project. Shipping is not included in the prices shown -- shipping from 76131. Here we go...... First up, set of Cherry Bomb Mufflers. P/N 87516CB, 2.5" in/out, 30" overall length. I have two of them -- buy one, get one free @ $30 plus shipping. 
Walker Exhaust Mega Clamp. Goes from 2.5" ID to 2.5" OD pipe. Have a set of 4, Summit says anywhere from $8 to $10 per......$15 for all 4.
Set of Porsche 944 front spindles and disc brake rotors. Rotors are used but have been resurfaced and are in very good condition. Spindles are very usable. Dirty but otherwise in good shape. No idea on price, will ask $60 for everything. Pics of rotors, don't have ones of the spindles.
Deeds Engineering 2.5" billet exhaust hangers. Really trick looking parts. Would use them but with as short as I made the exhaust on the TVR, I have no use for them anymore. Website shows $45 per and I have 4 of them....will sell them on for $90 for all 4:
Flaming River CrMo U-joints, misc sizes of DD shaft, one shaft support, one firewall support bearing. Summit says the U-joints are $92 each.....$100 for everything shown below:
Swing axle to IRS VW jigs. These are used to locate the position of the inner pivots of the IRS swing arms and weld the pivot to the frame. Modified for clearance so they'll be useful on Type-3 VW pans. Especially useful for converting your Puma from swing axle to IRS! $70 for the set. 
Block hugger headers for SBC. Purchased from Speedway Motors, can't find them on the website. These will fit LT1/D-port engines with angle plug heads. 1 5/8" tubing, 2.5" collectors. Raw steel, have mild surface rust. Paid somewhere in the $175 range -- for sale at $90:
Wilwood reverse mount pedal assembly, plus single 3/4" master cylinder, plus mounting plate. Pedal assembly used for fitment only, decided to go with floor mounted pedals. Pedal assembly alone listed for $399, will let everything shown go for $200: 
Flaming River shorty tilt steering column. Floor shift, has harness for GM wiring harness. Have to double check, but I believe this is 17" long. Also including the Flaming River CrMo u-joint and 2 column drops to attach column to whatever you want to attach it to! Column is $379 at Summit plus another $90 for the u-joint -- let it all go for $200. Steering wheel shown is not included in sale.
Genuine Subaru Crossbar kit for 2001 Outback. NIB as the kids say these days! Only opened for pics, never put on car. Have no idea what these go for -- $50 is what I'll put out there. 
'68 (?) Camaro taillight assemblies. They are old, pitted, and just used for mockup. Use as-is for that rat-rod look or buy new housings and lenses to attach to the back side parts, which I was under the impression were hard to find. $20 
Nashbar "vintage" hitch mount bike rack. See pic -- $40:
Further cleaning yields a few more things.... Getting rid of a small craftsman toolbox. $40, and call it a grab bag of sorts. There are some tools in it, but you gotta consider them a freebie -- buy the box, get the tools inside for free!
Next I have a set of, I think, vent windows for a late 60's Datsun Roadster. I got these from a fellow GRM'er for $0, so that's the deal here -- selling them on for $0, you just pay shipping.
I also have a rear window for a 78-82 Corvette. Very good to excellent condition, no defroster in it. Bought it with the intention of fitting it into the TVR -- now going to go with a lexan/plastic rear window and have no need for this. $50 and you'll have to pick up here in DFW -- no shipping. Have other miscellaneous TVR 2500M suspension parts, some Corvette C4 suspension parts. Let me know what you are looking for, I might have it. Full album is here: https://goo.gl/photos/Bm3MRMoonHZbUzBW6 Thanks for looking, tell your friends, etc. PM me or email me at jeff_attt_orphancars_dottt_com
