SOLD SOLD SOLD the car is Sold
The Escort ZX-2 in my profile is now officially for sale and the asking price is in the 1/2 challenge $$ ballpark ($1000). Make me an offer. Trade for running & driving Geo Metro/Aspire/Eagle Summit/P71 considered
After all the cars I've sampled over the last few years, putting this back together to rallycross is not very appealing. If it doesn't sell I may get it back on the road eventually.
It is not currently running/driving but it is a roller with functioning brakes and everything is here (somewhere) to put it back together. Engine and Trans are still in the car.
Could make a good: rallycross / autocross / cheaty lemons / challenge car.
Has done a lot of this type of stuff (but hasn't actually rallycrossed since fall 2010):
Bought from EntropyMan via the GRM $2K9 Classifieds.
SS front brake lines
Esslinger Underdrive Pulley
OEM replacement cat-back exhaust to S/R Borla Muffler
K&N Intake and Filter (also have a HotShot intake)
new front stock replacement struts and stock springs with experimental bumpstop setup
rear currently has dual rate coilovers on stock replacement struts
also have Megan Racing lowering springs, currently installed on old Tokico Blues
MX3 driver's seat and Schrothe Harness
Energy Ssuspension motor mount inserts and control arm bushings
stock rear sway bar and EGT rear sway bar
interior mostly gutted and dirty from rallycross: complete dash and door cards still in place
AC and PS removed, have parts to re-route serpentine, not done
new loaded front calipers and e-brake cables this summer, new rotors in box
MFactory helical limited slip differential professionally installed, CV axles need some fiddling, have necessary parts
There is a 'big' dent in the passenger side rear quarter panel
Edit: adding a couple of less appealing details -
One of the rear studs that the crossmember that the front and rear motor mounts attach to is broken off. Needs cut off / drilled out and a bolt substituted.
PS lines are cut but still attached to rack. Need looped or rack 'properly' depowered.
Transaxle output seals need replaced, currently leaks if filled to proper capacity.
I intended to removed the front sway bar completely. Never got the front subframe dropped (nervous about breaking bolts/captive nuts). It could be hooked back up. Also have ST add on front sway bar that mounts under the subframe and is used in conjunction with factory front sway bar.
Another Edit:
added some current exterior photos to this album - photobucket album