Building my life - general stupidity I get into

That sky after the storm was awesome last night!

In reply to AxeHealey :

My friend Polly lives not far from your shop and she sent me an awesome one

We had a beautiful double Tuesday night. One of the best defined rainbows ive ever seen in person. No pics,  i was driving. 

Fast forward we now have a devin/wartburg/datsun sized door.  Have to scrounge a couple 1x3's to make some trim, there's a decent chance i have some somewhere.  Also move the vega poster over to center and up a little because i think i'll bring some air line right above the trim.  

Will dig out my belt sander and bevel the cutoff post and skirt board to meet the floor because I don't feel like trying to remove them right now

In reply to Patrick (Forum Supporter) :

Run the airline through the sign where the exhaust is! 

it's like playing tetris but nothing really fits together 

Devin porn for Stampie 

So much room for airs.  Probably overkill on the expandability side.  Waiting for some fittings coming tomorrow and sunday to get all my quick connects installed.  
 

i got those manifolds on clearance years ago for just this purpose, for something ridiculous like $3 each at lowe's.  I saw them and said damn dude i'm going to use those for shop air someday.  
 

few fittings and some blocks and a couple screws and I can fire the compressor up and check everything.  I left my existing manifold and water separator in the old room next to the compressor for tire filling and i plan to leave the tire machines in there.  Just took a 3/4 tee off the tank and split it to the new 3/4 regulator/dryer.  The 2nd regulator/dryer will be for a player to be named later.  
 

brown santa should be here today again

I learned how to make sushi today 

Cleaning out the HF tent

I am now a vw parts dealer 

Patrick (Forum Supporter) said:

There might have been more.

I remember one evening in the Metroparks near that one ski slope, I saw a quadruple.  The conditions were perfect, the sun was almost setting and a rainstorm had just passed to the east.  Wish I had a camera.  A few other people had stopped just to look.

What's your dimensions on the shelving?  I'm thinking 2 feet deep and 2 feet between shelves.

In reply to Stampie (FS) :

Yeah 2' deep so you get 16' from a sheet of plywood and 2' tall because that's the spacing of the 2x4's in the wall.  

Truck ls exhaust manifolds keep coming outta nowhere.  I think someone fed them after midnight 

i THINK there are only 7 transmissions not currently in vehicles in the garage.  

ever see a Devin under a 920 Virago?  Now you have.  The bike engine is bigger than the car's

In reply to Patrick (Forum Supporter) :

Can you show us it's dash?  I like me some patina Devin porn.

Patina isn't what I would describe the dash(and car) as having.  Toxic neglect maybe.

Oh yeah baby.  Who's the dirty Devin?

You're creepy

Patrick (Forum Supporter) said:

Suitable for framing or.....perhaps an XXL Tshirt????? 

So on the list of overthought projects at Casa de Mofo is a lean to built on to the east side of the garage. The garage is 37 foot deep and my thought was building a 12 foot wide cement floor with 3 foot deep wood racking for two levels about 20ft long. Essentially cold storage strong enough to hold heavy items. It would also leave room for a car if necessary. 

Your progress has moved it up to third on the list. 

Abby and I ran the 240v circuit for the welders and got nothing.  Checked my breaker and had nothing.  Pulled breaker and my box was missing the last lugs for the breaker.  berkeley.  Picked up a new box at lowes.

Now

probed everything and.... half my new breaker for the welder circuit is bad.  berkeley.  Brand new.  Ordered another one.  Few staples to finish up and i have a new panel that has room for more breakers although I don't really need any.  Maybe i'll get a tool that needs its own.  
 

so for now i wait.  Will keep plugging away at organizing and cleaning.  

how comfortable were you with this exercise.....cuz honestly my main panel is junk and......I was thinking this can't be all that difficult .....but then again there are 'MASTER' electricians.....so i don't fry another set of side cutters...